My ipads sim tray is not coming out!!

i had put my micro sim in the sim tray.it fitted properly.after that i started working on it.then i wanted to remove it because its my cousin's sim.now its stuck!!!
wat should i do?please help me.i bought it on 2nd june 2012.i dont want to break it

Sounds like the SIM was not cut properly.... likely not much that can be done short of opening the device if the SIM tray will not eject.

Similar Messages

  • My sim is stuck in simtray and simtray is not coming out.What should i do?

    My sim is stuck in sim tray and it is not coming out.What should i do?

    There are instructions on this page for getting the sim tray out : http://support.apple.com/kb/HT4577 . Does that not work ?

  • Broke a pen's nib in my ipad sim tray opener hole, now I can not close it fully, what can I do?

    I lost my sim opener pin. So I was trying to open my iPad 4 sim with a pen. But the pen's nib broke inside the hole. Now my sim tray is not closing . 

    Remove the SIM try and try and shake the pen nib out.
    You may need a sharp pointed tweezer to help remove nib.

  • I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

    I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

    Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

  • TS2097 I inserted a new DVD, it is working but not coming out. Whenever I try to eject it, it does not come out. Apple should provide us the easy and manual way to eject CD/DVD or?

    Hello,
    I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
    I need a easier and manual way to eject the DVD. Where is apple's help?
    Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
    Thanks

    Thanks for asking, actually I just found a trick on a website.
    It siad that restart MBP while holding eject button, I did it and DVD came out right away.
    I hope that this works out for everyone.
    But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
    Thanks anyway dear.

  • BPM Collect pattern is not coming out  and it is in loop.

    Hi Experts,
    We have implemented a BPM Collect Time pattern and it was working fine in Dev and QA environments perfectly. Couple of days back we have some server issue in Dev environment and Basis team has done some thing with File Storage. From that time, all our BPM's were not working in Dev. It is showing that the block is waiting for some event to trigger and it is in Process state.  We have set it for 5 min and block is not coming out from loop.   We exported the code to QA and it is working in QA.  We tried SWU3 transaction as given in the below forum and it didn't help us.
    bpm collect time infinite loop error
    Some one please help us.
    Thanks
    Venkat
    Edited by: Venkata Gupta on Nov 27, 2008 12:54 AM

    Hi
    Is Your BPM having deadline branch ?
    If there is any system Exception then catch it.
    http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm.
    According to thread mentioned by you ,Schedule your Missed Deadline Branch.
    Also check your BPM using transaction SXMB_MONI_BPE and find out which step have error.

  • VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

    I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
    Message Edited by hussain on 06-10-2009 10:26 PM

    Just want to add another relieved reader of this thread.  I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones.  The next morning--no speaker sound.
    I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack.  But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.  
    Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
    When I put it to sleep again and fired it up--Sound!  I am so glad to find this solution so I just want to let people know it remains a viable option.
    Doug

  • Laptop is not coming out from hibernating

    regardings,my laptop is not coming out from hibernation. it is showing that is is going to hibernate but stuck there.it is showing that it is working. i wait for an hour but result is tha same. then i tried to restart but same result. can u help me in this metter 

    It's hard to say what the problem is. One recomendation would be to drop usage of the database connectivity toolkit as it adds a lot of complexity and limits your options for troubleshooting problems. There is an alternative here. Read the discussion and download the drivers...
    Also, what kind of database are you connecting to?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Ink not coming out from new cartridge

    I purchased the color and black cartridge from HP store. After installation the black ink is not coming out. Tried and checked all software settings and it seems the cartridge have some problem. Contacted customer service but no help. Can any one help?
    It is a 3515 deskjet all in one printer and printer head is not detachable.

    Hi jkoley, and welcome to the HP Forums!
    I see you are running into black ink issues.  I would like to help.
    I would recommend removing the ink cartridges, and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend utilizing the steps in this document on Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Everyone Stop Worrying About The iPhone 5 It's Not Coming Out This Year!

    Many have been saying, don't buy the Verizon iPhone 4 because in 6 months it will be outdated by the iPhone 5, this is completely false! Just because Apple has introduced a new iPhone every year doesn't mean it couldn't skip a year, I mean it's only happened 4 years in a row not 50. Think about it, Apple has a new product, the iPad, and with many other tablets trying to catch it, it is much more likely that this summer at the Apple Conference we will see an iPad 2 and a new software upgrade, iOS 4.5. Think about it the iPhone 4 has been the most successful iPhone to date and now they are introducing it to 93 million more people! I think they can survive a year without releasing a new iPhone. Also Apple mentioned that this iPhone didn't have 4G because of "current chip technology", do you really think they will have that all sorted out and ready to go in just 6 months?! No way! Apple cares too much about battery life, and their whole problem with 4G is that right now it uses too much battery life, so expect them to take another year to fix all that and test it out, remember AT&T doesn't even have a 4G network yet. The most you could expect is a price cut on the iPhone 4. However if by some miracle they do release a new iPhone this year it will not be what everybody is thinking, it will be like what the 3GS was to the 3G. It won't really add anything new at all, and your iPhone 4 will still be able to do everything that it can do. So don't be afraid, go buy the iPhone 4 February 10th, and 20 months later (October 2012) you can upgrade to the iPhone 4G, only 3 months after it will have come out.
    Also I have been seeing threads of people saying that Verizon will get new iPhones in February and AT&T will get them during the summer before Verizon, this is also completely false, the only reason the iPhone is coming out right now is because Apple and Verizon wanted to make the iPhone available to it's customers as soon as possible, right when Apple's contract with AT&T was up. So this is just a special thing, after this new iPhone's will be released on both AT&T and Verizon at the same time during the summer.

    primortal wrote:
    joeymp wrote:
    First of all, I think we can all agree that the home button isn't going anywhere (atleast on the iphone, the screen is too small for 4/5 finger gestures, plus you wouldn't be able to use the phone with one hand anymore), not only would that be the stupidest decision ever but every website that mentions it links it back to a site called BGR which claims they got "an exclusive tip"... sure. Also have you seen the code for the new iOS 4.3? It shows the devices: iPhone 3,3 iPhone 4,1 iPhone 4,2 iPad 2,1 iPad 2,2 and iPad 2,3 don't you think that means iPhone 3GS, iPhone 4 (GSM), iPhone 4 (CDMA), iPad 2 (GSM), iPad 2 (CDMA), and iPad 2 (WiFi)? Also look at the screenshot taken from the iPad, it shows that multitouch gestures are optional, how can they be optional if you lose the home button?
    Anyway, even if I'm wrong about all of this, there is no point in waiting 6 months for the next iphone because it won't really be the "next" iphone it will just be a slight update like the 3GS was, and maybe not even that, and the iPhone 4 will be able to do everything that it can do, and the worse part is that you will not be able to upgrade to the "real" next iphone (2012) because you will have signed a new 2 YEAR contract! Atleast if you get the iPhone 4 on February 10th, you will be able to upgrade in 20 months (October 2012) only 3 months after the iPhone 2012 is released.
    Granted removing the home button from the iPhone is a bit of a stretch but you never know with Apple. The versioning in the iOS is -1 of version of the actual hardware, iPhone 3,x (code) = iPhone 4 (hardware).  iPhone 4,x (code) = iPhone 5 (hardware).  If read in the engadget article it states, "two new-generation iPhones (4,1 and 4,2) and three iPads (2,1; 2,2; and 2,3)."  That mean iPhone 5 and iPad 2 is coming to AT&T and Verizon
    It's very plausible that it could be something like a 4GS but when Apple increments the version number by a whole number in the code it normally means a new hardware devices not an updated one.
    I'm just scratching my head on why Verzion would announce the iPhone availability when the release of a new iPhone is going to happen in the matter of a few months.  Why not just wait till July and announce the availability?  Is it just greed or stupidity on Verizon/Apple part?
    If the version of the iOS is -1 of the actual hardware, then why is the iPad 2: 2,1; 2,2; 2,3? Also, even if Apple is going to release a new iPhone in a matter of months, the reason they are releasing an iPhone 4 right now is because they wanted to start selling an iPhone on Verizon as soon as the AT&T contract was up. Why wait 6 months to make money when you can do it right now? This is also why Apple made sure that the contract they signed with Verizon was not exclusive, that way they could start selling to T-Mobile and Sprint whenever they wanted, they didn't want to make the same mistake they made with AT&T.

  • When  is the ipad mini with retina display coming out?

    Dear people of Apple,
    I was wondering if any time soon there will be a ipad mini with the screen updated to retina display coming out soon?
    If you have any guesstamate answers please write back!
    thanks,
    Keroparakeet

    Apple has not announced any new versions of the iPad mini. And we, your fellow users, are not allowed to speculate in these forums. We'll just have to wait and see.
    Regards.

  • After the recent upgrade to ios 8 ipad air has no audio coming out

    HI
    After the recent upgrade to ios 8 ipad air has no audio coming out

    I had the same problem until tonight. Played with ring tones, do not disturb, volume, and everything else posted. What I found is that when you go to sounds/text tone, there are two types of tones in the scrolling menu. The top set of tones are for alert tones and the bottom set are ringtones. They are separated by a gray bar that states their purpose. Many of the tones are the same name. You need to set your text alert in the Ringtones and reminders, alarms, and such in alerts. The weird thing about this menu is when you go to sounds/ringtone the menu is reversed. Mine works in locked mode or unlocked now. I have an Iphone 6 8.1.2. My problem started after my latest OS upgrade. Hope this helps.

  • Not coming out from DB Tools Execute Query

    When I am removing my Ethernet connection and again connecting[for server client communication ], then sometimes the DB Tools Execute Query.vi function stucked inside and not coming outside from this function for infinite duration.
    How can I come out side this function when some network issue will come?
    When network connection is OK then that time there is no any problem, it actually occurs when network connection lost during the program ececution.

    It's hard to say what the problem is. One recomendation would be to drop usage of the database connectivity toolkit as it adds a lot of complexity and limits your options for troubleshooting problems. There is an alternative here. Read the discussion and download the drivers...
    Also, what kind of database are you connecting to?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Itunes sound not coming out of ipod4

    I can't get my ipod4 to play itunes outside of the apple store. Both Apple store and anywhere else with wifi show I have a connection. It shows the song playing but no sound is coming out and my ipod works perfectly (bought it refurbished 3 weeks ago).

    Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
    Can you play music using the headphones?
    More troubleshooting here:
    iPod touch: Hardware troubleshooting

  • I am receiving e.mails for my gmail account on my ipad but they are not coming to my iPhone 4s

    I Am getting e.mails on my ipad to my gmail but they are not coming to my iPhone 4s

    Try here >  Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • Error in compiling Photoshop CC 2014 sample project

    Hi, I am trying to compile SDK sample project "outbound". but it is showing errors, as "Parse Issue: Unknown type name 'DialogPtr' " in DialogUtilities.h . DialogUtilities.h file is in "Adobe Photoshop CC 2014:photoshopsdk:pluginsdk:samplecode:common

  • I receive error 1311 when trying to install Acrobat 9 Standard

    I am having a similar problem. I purchased Acrobat 9 standard online. installed on laptop and desktop. Worked fine for a year. Then I tried the 9 Pro trial on my desktop, and decided I didn't want or need it, I declined it. Ever since then, my Acroba

  • BAPI/FM to update the condition value in Rebate agreement(VBO2)

    Hi All, Please help me in solving the below requirement. The requirement, 1) In VBO2 ---> Enter agreement 2) Go to conditions in the application tool bar 3) A pop up 'Valid condition types and Key combinations' will appear. Select a particular key co

  • Logic Express and Waves Plugins?

    I have the waves gold bundle that i use with DP. Just got logic express to see if can make the swtich from DP. But all i really need is to be able to use my waves gold bundle. BUT I CANT. is this just becuase i am using LE? here is what happens... WH

  • Search results showing ID of Managed metadata field

    Our output of the search function in our Sharepoint 2010 intranet shows the id of the managed metadata field (see image). Every time a managed metadata field is shown in the result, it is followed by it's ID. Does anyone know the solution to this pro