My iphon can't ope wi-fi
hi
my iphon can't ope wi-fi.please tell me why?
Not much information in your post regarding the nature of your WiFI problem. See if this helps:
iOS: Troubleshooting Wi-Fi networks and connections
Similar Messages
-
Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
We need it to be acceptable to all devices.
Thank you!You can tell Apple directly at the link below.
http://www.apple.com/feedback/iphone.html -
my Iphone can call ut and receive text/email messages but is not receiving incoming calls. What is your thought?
Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy -
I have a 3g iPhone and a new epson imprint compatible printer but the iPhone can't see it. I have downloaded all the software.
But my phone does not recognises the printer. Can anyone Help? Thanksto trouble shoot look here http://www.apple.com/support/iphone/assistant/airprint/#section_1
-
This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.
You can't, you will need to get a new remote.
-
Two Apple IDs on iPhone, can't accept password
I changed my Apple ID and everything appeared to be fine, but now iPhone keeps asking for old ID password? forgot password won't work.
I too have had this problem in the last month or so, but on a mac with snow leapord. The weird thing is, my wifes iPhone can connect, and mine will connect every fifth time. I don't have a firewall set up
-
HT4527 an iphone can be synced with only one itunes library at a time error on same pc
an iphone can be synced with only one itunes library at a time error on same pc why?
Damaged library... See Empty/corrupt library after upgrade/crash.
tt2 -
An iPhone can be synced with only one iTunes library at a time
I recently bought a MacBook Pro, and I figured it would be pretty simple to move my iPhone to sync with iTunes on the Mac from iTunes on my pc, afterall it is the same program and both are designed for the iPhone.
I have been successful in getting the Contacts and Calendar to sync, but the Music, Applications, Video and a few other things give me this message when I check the sync box:
"The iPhone is synced with another iTunes library. Do you want to erase the iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
Obviously, I don't want to erase everything. Actually, I don't care about Music, Videos, Podcasts or Ringtones as I don't have any, but I do care about Photos and Applications. Actually Photos I can reload too, but I don't want to loose the apps I have purchased with the iTunes App Store.
I even tried going back to the PC and unchecking the Sync boxes on it, hoping this might disassociate it from the phone, but now even on that PC I get the same message.
How do I disconnect phone from the old iTunes and be able to sync it to the new iTunes? This should be simple right?I made an appointment with a Mac Genius and I will say that while it was better than getting to talk to India on a poor quality phone call it was just about as helpful. Sure she was cute and friendly, but I left without my issue resolved and was surprised that I didn't even get a followup from anyone asking about my experience (hence my venting here)
Anyway, I found a solution for my issue here: http://tinyfish.net/2008/07/18/how-to-sync-iphone-with-multiple-computers/
This is a real solution to the issue, and has the benefit that I can do this to as many machines as I need and sync at any of them instead of just one. Hopefully, Apple doesn't delete my response since it truly is the answer to the problem and others might be looking for the same solution. -
My self and my wife each have a phone on the same vodafone account, i have an iphone 5 with an apple id also ana ipad on the same apple id. My wifes phone is a samsung, but if i buy here an iphone can i attached it to the same apple id.
Yes and No. yes for sharing music and apps. No for icloud/facetime/imessage - she should get her own id for that.
-
Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback... -
All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4. Newest OS. Never happened with old OS! Cycling phone on/off does not help. Ignoring message causes phone to cycle off then on. After first time this happened, I restored. Six days later...same problem! Clearly a new fix is necessary. Suggestions?
I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc). Any suggestions? What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?
-
When syncing photos getting error iPhone can not be read from or written to
I am getting an error only when I try to sync photos. Error is iPhone can not be read from or written to. This only happens when I am syncing photos, so far everything else syncs fine. I have an iPhone 3G S. I had some pictures on the iPhone that I deleted, still no sync. I am restoring the iPhone right now.
I am having the same issue. I get "iphone unable to sync, an unknown error occurred (-51)" I have restored twice and once even set up as a new iphone. Nothing so far has worked. If anyone has any suggestions, please pass them on
-
I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune
If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Sorry for the repeat post but I want to get more help with this.
Prior to problem: All devices surfing wirelessly on Airport Express.
Replaced Airport Express with Time Capsule.
Problem: Wife's iPhone4 (5.1.1) can not surf on wifi provided by my time capsule. All my other devices (iMac, Mac Air, iPad and my iPhone) can. Wife's iPhone can surf on an unsecure network somewhere nearby in my apartment complex. (Which to me, rules out a hardware problem).
Steps taken: Tapped iPhone wifi On/Off multiple times with no change. "Forget this network" multiple times with no change. Reset iPhone Network Settings multiple times with no change. Restored iPhone using iTunes as New iPhone once with no change. (Since doing that, I have restored with back up of iPhone settings and data.) Powered Time Capsule on/off several times with no change. Turned wireless security off with no change. Security is back on. It is WPA 2 Personal with a lengthy password. I'm not getting the "incorrect password" msg. Renewed lease multiple times with no change.
Other indications: 3G is in upper left. Status wheel is spinning next to my network's name. On the initial "Settings" window, my network name is shown (as if it were connected. But tapping it and going to the "wifi networks" window shows the list of available networks with the status wheel spinning next to mine.) Tapping the blue arrow on my network name leads to the window that has "forget this network" at the top, and a list of blank fields: IP address, subnet mask, router and so on. DHCP is chosen, HTTP proxy is OFF. Sometimes, the top two fields (ip address and subnet mask) have values filled in, but the rest of the fields don't.
On my Time Capsule, as seen via Airport Utility (V5.5.3), 3 devices are shown as connected. Clicking this provides a listing. My wife's iPhone wi-fi address is listed. It's "rate" however is 1. My imac is 216 and my iphone is 65. BTW, iOS devices drop off the list when they go to sleep. No big deal there.
Back to Airport Utility, in the summary tab... status is normal, version is 7.6.1, wireless mode is "create a wireless network", security is "wpa/wpa2 personal", channel is 149 auto and 1 auto (I tried changing 1 to 11 with no change), connect using "ethernet" and finally my IP address begings with 76. 76.xxx.xxx.xxx
Moving to the "Wireless" tab of Airport utility... wireless mode is "create a wireless network", radio mode is auto, radio ch. selection is auto, wireless security is wpa/wpa2 personal, "remember password in keychain" is checked. Now Clicking on the "wireless network options" button..... 5ghz is not checked, country is USA, multicast rate is "low", t-mit power is "100%", WPA group key timeout is 1 day (it used to be 1 hour but this has made no change in the problem), "use wide channels" is not checked, "create a closed network" is not checked.
MAC access control is not enabled. But it was enabled previously and I added my devices by their Wi-Fi addresses one at a time until i decided to turn it off due to this problem. this resulted in no change with the problem.
Personally, I feel the prob lies with the DHCP and ip address and related fields, but I don't know enough about what their values should be in relation to my other devices to alter them on my own.I pasted below a response that helped.... sort of. I followed the directions below. At the end, all my devices were connected to my network. BUT, the last device I connected, my MacAir, did not stay connected for long. It now has the exclamation point in the middle of the wi-fi icon in the top right of the screen.
This event agrees with my original problem: It was my wife's iPhone that was the last to be connected to my network and the only one to fail to connect.
Is there a limit to how many devices can be connected to my time capsule? I have 5 devices. What is "extending?" Do I need to do that?
Bob Timmons Texas
This solved my questionRe: Airport Express wifi network not working
Mar 1, 2012 1:46 PM (in response to Don_McCracken)
Open AirPort Utility and click Manual Setup
Click the Internet icon, then click the Internet Connection tab
Make sure that the setting for Connection Sharing = Off (Bridge Mode)
Update to save any changes
Then power down the entire network...all devices....power down order is not important
Wait a few minutes
Power up the modem/router first and let it run a full minute by itself
Power up the Express the same way
Continue powering up devices one at a time the same way until everything is powered back up
You should be able to connect through the Express and on to the Internet
Maybe you are looking for
-
I have a very old apple ID that was used to install some of my first apps that I still use today such as Whats App. I cannot install updates for these apps because my apple ID is no longer operational and when I try and reset this apple ID I get an e
-
[Solved] ASUS F3Ka bluetooth doesn't work
Hi everybody! Can anybody help me with getting bluetooth to work on ASUS F3Ka please? Here is the dmesg output: [n0ne@darkstar ~]$ dmesg | grep Blue Bluetooth: Core ver 2.11 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI sock
-
Mail Adapter configuration connection timed out
I am setting up a simple mail scenario to test if my mailadapter works. But I receive a error message in the Communication Channel I receive this error: "exception caught during processing mail message; java.net.ConnectException: Connection timed out
-
Missing/Disappearing Registration Points in Flash CS5 Master Suite
When I create a new symbol Flash allows me to pick and choose my registration points inside the symbol and functions normally. However when I choose the same symbol or an already created symbol, I am no longer able to change the registration point. I
-
The keyboard and mouse have stopped 'talking' to the computer - cursors do not move in response to mouse, right and left clicks do not register and typing does not happen.. Batteries have been replaced on both. The computer seems to be working normal