My iphon has a problem whit reception line

hi,
my iphone 3gs has a problem whit vodafone..somebody can help me??
thanks and sorry for the scarse linguage

No really. 'a problem with vodafone' is too vague to offer advice.
What is the problem - in detail please ?

Similar Messages

  • TS5183 My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore..:-( this has been playing up for some time now.

    My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
    Can antone help me? is there something i can do, apart from buying a new iphone!

    Have you got Siri turned on in settings/general/restrictions?

  • Signs that my iphone has heating problems?

    what are signs that my iphone has heating problems?
    I'm not sure whether to put it under "normal" heating or technical heating problem? I don't have a receipt because i got it as a gift, so what should i do to get it fixed from apple? thanks guys.
    it gets hot around the ear piece area and the back of it if im on the phone for a good 5 minutes.

    Karth Vahlnar wrote:
    Slightly warm=normal
    Burns ear=not normal
    What is "slightly" warm to one may be painful to another.
    The ear receiver should not get warm under any condition.

  • My iphone has a problem, when any people call me, them can't ear  me

    My iphone has a problem, when any people call me, them can't ear me.

    iphone hardware troubleshooting http://support.apple.com/kb/TS2802

  • TS3899 My iphone has had problems sending e-mail via my 1&1 e-mail account

    My iphone has had problems sending e-mail via my 1&1 e-mail account for the last two days.  I get a 'recipient rejected by the server' message.  I have not changed any settings.  If I change the from address to i-cloud the e-mails go.  Advice please.

    i think you need to contact your email provider - that sounds like an issue on their end and nothing to do with your phone.

  • HT4623 My iphone has a problem.

    My iphone has a problem. this morning my iphone was dead, I connected the iphone to the computer and I am updating the system with a restore and for 4 hours my phone is with and apple and a bar of download that doesnt move. I already did a few things like reset the device and connected it back to the computer and started the process again but it diesnt work. what can I do to fix it?

    That's the problem.  You keep restoring corrupt software.  Restore as NEW and don't use the backup at all.  Set the phone up from scratch.

  • Hello my name is achuthranesh and my iPhone has in problem. When my iPhone was in vertical position the upper touch screen (up to 4mm) is not working....... Plz help me.....

    Hello my name is achuthranesh and my iPhone has in problem. When my iPhone was in vertical position the upper touch screen (up to 4mm) is not working....... Plz help me.....

    Are you talking about status bar or 4 mm ( screen) below it

  • My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • X-Fi Notebook has a problem with headset/line-in

    0X-Fi Notebook has a problem with headset/line-in` First the basics:
    -HP Pavillion dv6000
    -Intel Core 2 Duo @ .83 GHz
    -Windows Vista Home and Student (SP) 32 bit
    -3 GB RAM
    Ok, now the problem:
    -Ever since I got my Sound Blaster X-Fi card for this past christmas, I've had a problem with using the headset/lin-in port on it. Its only now that it's gotten to be a big enough irritation for me to need to fix it. I went to play some BF2 and hook up my earphone/microphone combo. The problem is, that the default recording device "Line-in" doesn't detect any sound when I have it plugged in. Further more, when I change it to "SB X-Fi micropone" it does detect my voice, but its on some kind of feedback loop, because it then transmits whatever the mic picks up onto my speakers/headphones/whatever I have plugged into it as an output. Its almost like they have the "line-in" and "microphone" functions either switched or blended into one. I did a complete reinstall of the drivers and software, but no luck. Any suggestions would be much appreciated.
    Thanks guys

    Hi,
    What I mean is the microphone jack on your x-fi notebook. since you are saying you can hear yourself when you switch the recording source to microphone, I would assume that you have plugged in a microphone into your x-fi notebook. You should check if there is a microphone control on your volume mixer and whether it is unmuted if there is one. There are many sound card which allows for the microphone audio to be heard on the speaker output if the microphone source is unmuted.
    Message Edited by flipflop on 03-29-2009 09:03 [email protected]

  • Well, in two weeks I have gone through 2 mini's.   The first had a 1 inch wide shaded zone top to bottom.  Apple replaced it .  Now, the replacement has started with white flickering lines at the bottom. anyone else exper. probs?

    The Ipad mini replacement (the first had a 1 inch shaded band running down it - and Apple replaced it.  Now my new one has a flickering set of lines at the bottom of the screen.  I reset adn reloaded, powered it down and up and still there.  Seems likely to be a hardware issue - just wondering if anyone else has experienced this.   Nothing unusual - havre Mac Airbook, two other older ipads and iphone and all are fine - no issues charging or such.

    You must be at the end of the bell shaped curve for device problems.  There's always someone who experiences this, and unfortuantely you are the rare user to be annointed by the gods of bad luck.
    I read many Apple forums, and your story is indeed rare.  Just like the person who wins the lotto, there are those who play all their lives and never win anything, not even $1.00.  I'm sure you get the picture.  I had a similar experience many decades ago, only with a car (or cars).  Not fun and not funny.

  • My iPad quit recognizing my bluetooth speaker but my iPhone has no problems

    My iPad was working fine with my bluetooth speaker in December then in January it no longer can find the speaker. I have updated (8.1.3) and checked to make certain the bluetooth is turned on. My iPhone 5 has no problem finding the speaker.

    Make sure that you have placed the speaker into "Discovery Mode" for your iPad to see it.

  • My Iphone say that conect whit Itunes, i conect and say "Your Iphone has a problem.", My Iphone say that conect whit Itunes, i conect and say "Your Iphone has a problem."

    Help me please

    Normally when that happens iTunes offers a suggestion of what to do next.. i.e. "Restore".
    What is the error and what is ITunes suggesting you do?

  • My Imac has black and white vertical lines

    Riddle me this Apple...
    A few months ago, my 2008 Aluminium 24inch Imac locked up and exhibited space invader style pixels all over the screen.
    After rebooting, it was fine for a while and then it would freeze again and I'd get the same Atari style pixels appearing, and everything would be frozen.
    Then, most reboots after that, I would get vertical lines in groups of three, alternating black and white squares as in the photo.
    I called Apple here in South Australia, and they said "it's your graphics card, and it will cost $400 to fix and we need it for a week".
    Not wanting to do that, I bought a $15 firewire cable, booted the Imac in T mode and used my PC laptop running macdrivepro to save all my files onto a 500gig backup drive, and then proceeded to fix the corrupted kext files and most importantly delete the recent flash player update which I believe was causing the problem.
    Booted her back up, and she ran perfectly. For a few weeks, until it started again.
    So I re-installed the Leopard operating system from the original disks, and that fixed it. $15 is better than $400.
    Now, a few months have passed, and the problem had come back again, now that I have added more stuff on my computer.
    This time however, I chose to wipe the drive completely and do a fresh install of Leopard, and then upgrade to Snow Leopard.
    The problem is that it won't boot from the CD drive anymore, won't boot from a thumb drive, won't boot in any mode except T mode, but then it has these lines on the screen again and eventually I get the kernel panic happenning and it wants to be shut down.
    Every time I start the computer, these lines IMMEDIATELY appear. I've tried resetting the Pram, tried changing memory and have now resorted to surgery.
    I've taken apart the Imac, yes I hear you Apple...you guys thought that we mortals wouldn't delve into the depths of your finely machined systems, however, some of us do own micro torx head tools to remove those pesky screws, and yes, a razor blade does lift up the magnetically attached screen glass without having to use suction pads.
    So once inside the temple of doom, I removed the hard drive, and dropped it into a hard drive dock.
    After days of messing around with it via four other MAC computers, running Tiger, Leopard and Lion, we have still not been able to install an operating system back onto this drive.
    Does anyone have any insight into what these lines actually are? Every one I speak to says a different thing...
    "It's the graphics card", "It's the hard drive", "It's the cable that connects the LCD screen", "It's the motherboard", It's the screen itself", "It's a corrupted bios" etc etc..
    But if it's any of those things...then why did it run perfectly after I fixed it the first time?
    Any and all help is greatly appreciated.

    Hi BDAqua,
    I appreciate you taking the time to reply, and for the suggestions.
    My spider sense was tingling, as were my eager fingers to login and read your reply, in fact I was almost salivating at the thought of crushing those Apple reps with a swift blow from one of my megalithic old 4gig internal drives, or better still, perhaps shooting my old DX266 sporting a massive 256k HD and 4mb of ram, fully loaded with Encarta and Windows 3.11 out of a cannon and straight into Steve Jobs bedroom window, with a note saying..."How'd ya like them apples..".
    But alas, my Aquatic friend, I am in need of a functioning operating system to be able to do any of those magical tricks you suggested (insert frown face here)..and yes, when I finally opened up the Imac and peered inside, a moment not unlike Indiana Jones peering down into the depths of the Well of Souls, I suddenly realised that an Imac might look impervious to heat vision and thermonuclear devices on the outside, but inside they can still gather as much dust as my infinately useless ZIP drive that I bought back in the late 90's, thinking it was the best thing since the invention of microsoft paint...awesome program by the way guys..
    Getting back to the problem at hand, the issue really is that I have, perhaps stupedly, reformatted the 500gig WD drive via a hard drive dock, which is really a lot like one of those early 1950's cassette drives you find in vintage cars..
    And upon returning the drive to the Imac and re-assembling it WITH REAL SCREWS, not titanium-alloy fingerprint encoded ones like you would expect to find in Iron Man's suit, I could only boot the poor thing into T mode. No other modes were available, and believe me, I tried all of the alphabet...even the "C" button, which if you ever watched an episode of Knight Rider called Knight of the Juggernaught, did not turn my computer into a convertable..
    By now you're probably sensing that the irony of all of this is that I am typing this message on my Windows 7 upgraded HP laptop, which sounds not unlike a jumbo jet taking off at times, the fans are so loud, and among other things, it keeps telling me it is not genuine, even though I paid good money for a proper copy to free me from the painful experience which was Vista, and so in a sense, microsoft is playing a small part in the desperate rescue of it's far superior, yet broken down and busted arch enemy...I bet somewhere in it's RAM, it is smiling in little ones and zeroes, while it hides behind a free copy of AVAST, hoping one of a billion nasty viruses don't come knocking on the kernel door..
    The next round of drinks goes to the man, woman, child or droid that has any other suggestions that could allow me to participate in some of the ideas put forward by our very knowledgable watery friend..as alas, I do not have any of those options available to me.
    Today's assignment is.. how do we install an operating system on a formatted external drive. Sounds easy doesn't it...I've read many articles, but in practice it's proved as elusive as Bigfoot.
    I just cannot make this hard drive understand that there is no spoon...
    EdStraker

  • Help! My Iphone has big problem.

    Firmware of my Iphone may be damaged a few days ago.
    It can boot in only recovery mode showing 'Please Connedct to Itunes' and not in normal mode.
    If I try to restor with Itunes, finally I had error showing "The Iphone could not be restored. There is not enough memory available".
    What can I do?
    I have no work for my IPhone.

    It would be pretty clear that bringing your phone to an apple store, or calling apple would be the only way to get your problem solved.
    They will be able to diagnose and fix your problem.

  • IPhone has constant problems with Computer-To-Computer network

    I use a Computer-To-Computer network to connect my iPhone with my MacBook Pro when I'm at the office. This enables syncing of Things and OmniFocus between my iPhone versions of these programs and the versions on my MacBook Pro. I have one of the original (2G) iPhones. I daily go to my Airport icon on my Mac's menu bar, click on Create Network, and set up a password. I'm using 40-bit WEP.
    This sort of syncing procedure worked fairly well until iPhone OS 3.0. Ever since then, it's been completely unreliable. I've tried changing the channel a number of times, and of course rebooting both the iPhone and the computer dozens of times. It's still a problem.
    Anyone heard of this networking problem with 3.0? Any info appreciated! Thanks.

    yes, i have been having problems with computer to computer networking to iphone as well. for now, the only thing that keeps a steady connection is removing the sim card, so keep a paper clip handy.

Maybe you are looking for

  • Use HCM processes and Forms without using the Enterprise Portal

    is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal? 1) Create an Adobe form and Interface using SFP 2) Set up ISR and Form Scenario 3) Set up Forms configuration to use ex

  • Unable to operate wireless printer with new router

    The HP Officejet Pro 8000 has been working successfully for the past year via wireless on a home network with 3 computers using an ATT Uverse internet router.  The router was changed to a different new ATT wireless router with a different network nam

  • Copy & Background color

    Hello How can I change the background color from black to another color? Can one copy a word from the text? How? With ADE I cannot copy. With Adobe Reader I can copy. Thank you for your answers.

  • BB Pearl 8120 T mobile

    Is there anyway to read my email from my wideopenwest account on my 8120 if I don't have bb internet package?  From the T Mobile website, I have my email being forwarded to my 8120 as a text message (I think).  I can see the sender and the subject bu

  • Main/subVI control confusion

    hello one and all, i am a little confused on the best way to approach this.  i have a main and sub VI.  the main VI is the main VI and the sub VI has a complex settling routine and after all the little parameters have settled out, it quits its while