My iPhone 3G Charges But Does Not Sync

is there anything i can do to fix this?

Too little info here to go on. Are you using a Mac or PC?
SHARK!

Similar Messages

  • Itouch charges but does not sync?

    I have had my ipod touch for about a year and a half. Before this, my itouch was working perfectly and syncing fine. However, I put some files from a USB stick on my itunes, and ever since then there has been problems. It did an initial sync however now, itunes does not recognise my itouch as an ipod and only charges when plugged in. When i plug my itouch in, it is registered as a camera and asks whether I would like to see photo files.
         I have plugged in an old ipod and it sync's just fine. I have also gone into an Apple Store and they only suggested to close down all running apps. I have also restarted my computer and ipod. I cannot reset my itouch as it is not even recognised and does not show up on the side as a tab!
         Please Help?! I am unsure whether to reinstall itunes. Also, my computer ( a dell inspiron 1520) will not download the latest version of itunes, so I think this may be the issue.

    Got it to work! Here's what I did:
    -Turned off iTunes
    -Disconnected the iTouch and then held both buttons to turn it off
    -Plugged in the iTouch
    -Turned on the iTouch, when iTunes activated it properly sync'd all my changes.
    Hope this works for you!

  • IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner.  i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?

    IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner.  i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?

    Same thing happened to me, nothing is working. I've updated everything, restarted everything, nothing seems to work.

  • My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

    My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

    Hi there Graham!
    I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
    iTunes: Purchasing and viewing HD videos
    http://support.apple.com/kb/ht3209
    Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Hope that helps. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

    My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • My ipod will charge but does not show in itunes or windows

    I tried to use my ipod as a disk to transfer my itunes library from my desktop to my notebook (both Dell), now my ipod charges, but does not show up in itunes or on either of my computers. I have used the advice of going to control panel and unchecking the box under power management but that didn't work, CAN SOMEONE PLEASE PLLLEEEEAAAASSSSSSSEEEEEEE HELP ME?
    I have windows xp on one and vista on the other, if that helps.

    This worked for me, don't know if it will for you. Have ITunes open. While IPod is connected to computer press(at the same time) the menu and center buttons until your screen goes black and shows the apple icon then immediately press the forward button. Your IPod should show up. It won't hurt to try it, even if it doesn't work. Hope this is of some help to you.

  • My ipod touch 5th gen. is not charging but is not syncing or being recognized by itunes 11 ? How can i fix this??

    My ipod touch 5th gen. is not charging but is not syncing or being recognized by itunes 11 ? How can i fix this??

    Hi cecebabymusik,
    Welcome to the Support Communities!
    Try the specific steps below for the your iPod touch first:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    I hope this information helps ....
    - Judy

  • Mac book pro fully charged but does not power on

    My Mac book  pro is fully charged but does not power on.No lights sounds...nothing!

    try doing SMC reset, the following article tells how:
    http://support.apple.com/kb/HT3964
    if it still won't turn on try the following article:
    http://support.apple.com/kb/TS1367
    if neither of this helps i would take to apple store or apple service provider and have it looked at for possible repair.

  • Ipod Touch Charges but does Not connect.

    Hello,
       I do not know much about computers and even less on how to fix any issues but here is my problem
        When I connect my Ipod Touch, it will charge but will not show up in my computer. I have a Dell Laptop Windows 7.
    here is what I have tried
    Uninstalled Itunes and then Reinstalled it. (I deleted Everything related to iTunes)
    Rest iPod by holding the Power and Home button. I even Turned it off and then On.
    I went into my Computer under Services and Stopped then started my Apple Mobile Device and made sure it was on Automatic Start Up Type.
    Plugged it in my Sister's Laptop and it installed the linked to her iTunes no problem.
    ANy ideas?

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

  • When I plug in my iphone my charging symbol does not appear and my phone is not charging.

    When I plug in my iphone 4 my charging symbol does not appear and my phone is not charging.  Do I need a new battery?  It is only a year old.

    Can you try a different charger/USB lead? Also check the connector on the bottom of the iPhone for pocket fluff

  • Ipod Classic 160GB connects but does not sync to new itunes

    I'm having a lot of trouble after installing the latest itunes. My iTunes picks up the ipod as a device but will not sync with it. I've tried to just sync it, ive shut down itunes and turned the ipod off and tried, i've ticked the box that says "convert higher bit rate songs to 128kps AAC" and tried to sync and unticked the box and tried as well. I have also tried going to File ->Devices->sync, and the sync button is shaded so i can't click on it. I have also reset it to factory settings and tried. I'm out of ideas, does anyone else have any?

    Hello DeclanConky
    Check out the article below to troubleshoot if it is software or hardware. Try starting up in Safe Mode or try it out in another user. Also when you removed iTunes, did you remove the other associated files Apple in the specific order indicated in the second article?  Let me know if this works out or need to continue troubleshooting.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Regards,
    -Norm G.

  • Icloud works great on ipad (2) and iphone 5, but does not sync using icloud panel on PC

    I have a iPad 2 and iPhone 5, which sync perfectly with iCloud.  Recently, my iCloud on my PC quit working and I've tried re-installing, etc, but nothing seems to work.  If I enter a new contact or meeting, it will not sync with my other devices.  Help?

    If photostream is not working you can
    Use Explorer to open the Photo Stream Folder.
    The default location normally in C:\Users\Juz\Pictures\Photo Stream\My Photo Stream
    I’ve changed mine to F:\Photo\Photo Stream Download
    Right click the folder, and click Propeties
    You can see the Read-Only has been checked.
    So, you just need to Un-Check the Read Only, and click OK.
    Your photos from iPhone / iPad will transfer to your PC automatically again.

  • TS1286 my ipod touch will charge when using a wall charger, but will not sync or charge to my computer?

    when i connect my ipod touch to my computer it does not show up the syncing icon on the battery and does not respond when fully pushed in. i can charge my ipod with the same cable into a wall charger but not a computer even though i am using the same cable.

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows

  • Unresponsive Satellite L55t - charges but does not turn on

    Hello, I turned on my laptop and the backlight lit up but there was no display. I could hear it turning on and the indicator light came on. When connected to an external monitor, the display was just fine. I did some research, opened it up and disconnected and reconnected a few things (which I do often) and closed it back up. When I tried to turn it on this morning it was unresponsive. When connected to the ac adapter the charging light will turn on but the power button does not turn the laptop on. I desperately need this laptop for school, it's beyond it's warranty and I don't have the money to get it serviced. If I can find the source of the problem I'm open to replacing said part as long as it's not more expensive than sending it out to Toshiba. I've since taken the entire thing apart. The only things connected are the motherboard and CPU, both of which I've taken out and cleaned (fan was gross but I digress). I'm handy enough to be able to put it back together correctly and I know the basic parts, but I was hoping that someone could walk me though some troubleshooting as I put it back together. Or if that's not how it's done, maybe someone can help me take it apart in the right order so I can isolate the problem part. I have high hopes that it can work again (as it was powering up just fine a couple days ago with the exception if the display problem) I'm just not sure how to go about getting it back to that point. Thanks in advance for the help!

    pikeno300 wrote:
    It is experiencing the same problem in my l55t b5330. Please need a solution!Your support site is here.  We don't know what exact model number the OP had as he/she did not specify.   The OP was experiencing one problem, then took computer apart and put back together and then began experiencing a different (albeit similar) problem.  Why don't you start from scratch and describe exactly what is going on with your computer as I'm pretty sure the OP will not be back.

Maybe you are looking for

  • How to add a photo

    I have tried to add photos and titles but it does not work. I can only add videos. Is there somebody who has got the same problem and can help me? In imovie09 this was easy, but now I am using my new macbook with imovie11. Is the software installed o

  • IPad (gen 3) wifi download speeds

    I recently upgraded my Comcast Internet to 50Mbps download speeds.  Using the Speedtest.app I am showing around 30 Mbps on both my iPad (gen 3) and iPhone 4s.  I was wondering if anyone has been able to achieve faster download speeds than that on an

  • Drive Region Code different from iBook to PowerBook??

    I am visiting Germany from America and i have a Powerbook G4 and my girlfriend has a iBook which we purchased at the same time (before X-Mas) in america. now i know about drive region code settings and their purpose (although i dont undestand why the

  • Time machine great but programs crash

    Hello all, Just wanted to say how relieved I was to have upgraded and been using Time Machine. Hard drive crashed, got new one, recovered from TM and everything came back exactly as it was. However. I can't say for sure this has anything to do with T

  • Windows Server 2000 SP2 update to SP4, iPlanet SP2 need to update to SP9?

    Whether iPlanet SP2 will have an issue running on Windows SP4 or not. Do I need to upgrade our iPlanet from current SP2 to SP9 (latest version)? If we upgrade iPlanet to SP9, will there be any problem for our application product running on the iPlane