My iphone 3G doesn't detect my JawBone headset!!

Hey everyone, hope someone can help me out!! I got my iphone 3g couple days ago, everything works great. But when i turn on the blueooth and try to connect it to my Jawbone headset, it is just showing searching, searching and nothing was being detected. Have anyone had this problem!! Thanks for the help!!!

Folks..
There was a post similar to this, but was lacking something that worked for me specifically. From the Apple site http://us.jawbone.com/pairingguide.aspx the following will pair the Jawbone (original at least) to the Iphone. I had similar problems with not being able to pair until I came across this:
Apple iPhone
_*Set the Jawbone to Pairing Mode._*
For the Original Jawbone, press and hold down the Noise Shield button for at least three seconds until the LED Indicator Light flashes red.
For the New Jawbone, press and hold down both the NoiseAssassin™ Button and the Talk Button for at least three seconds until the LED Indicator Light flashes red and white alternately.
From the iPhone Home screen, touch Settings.
Touch General.
Touch Bluetooth.
Turn Bluetooth on. (The iPhone will search for nearby Bluetooth devices.)
Touch Jawbone on the list.
Enter the PIN number "0000".
Touch Connect.
The Jawbone should now be paired with the iPhone.
I hope this helps someone - it helped me.
Thanks to all who posted before me.

Similar Messages

  • IPhone 4 Doesn't Detect ANY wifi networks at all

    I just got my iphone 4 a couple of days back (Finally) and to my dismay, it failed to detect a single wifi network.
    After hours of throwing it around at home, it finally picked up my wifi network (although there are about 10 others which it didn't display).
    Thats the only network its been able to detect, I'm currently elsewhere and I would like to use it's wifi.
    My step-brother got his iphone 4 the exact same time as me from the exact same retailer and he has had no problems at all. Any help?

    My ipad 2 does that same thing but it hasent connected for 4 days.

  • ITunes doesn't detect my iPhone, iTunes doesn't detect my iPhone, iTunes doesn't detect my iPhone

    I've been using iTunes with my iPhone 3G for over 3 years without a problem.  This week, iTunes no longer recognizes my iPhone.  It is recognized by Windows, is working properly in Device Manager, and the Apple Mobile Device service is Started and Automatic. I am running Windows 7 64bit.  I followed the troubleshooting directions to retart the Apple Mobile Device, and then the directions to completely uninstall iTunes, reboot and reinstall the latest version. 
    Still no joy.  My iPhone is immediately recognized on my husband's computer/iTunes. His iPod is recognized by my iTunes.
    What next?

    Try restarting the iPhone while it's connected to the PC. See if that makes a difference.
    If not, try disabling anti virus software and turning off the Firewall.
    Disable antivirus software
    Turn Windows Firewall on or off
    Then see if iTunes will recognize the iPhone.

  • I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

    Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • When I connect my iPhone to my iTunes, my iTunes doesn't detect the phone

    When I connect my iPhone (iPhone 3GS) to my Mac laptop, my iTunes (10.5.2) doesn't detect my phone, but the phone sti charges and acts like it's properly connected. On the iTunes, there is no icon revealing that the iPhone is detected, what can I do to fix this?

    http://support.apple.com/kb/ts1538

  • Computer doesn't detect iPhone

    I have a 1st gen iPhone and when I plug it into my computer, it doesn't detect it. I know the USB works because the phone is charging. What can I do to get my computer to recognize the device?
    I am using a desktop Mac with OS 10.5.7 and iTunes is v 8.2.1.
    If you need other info, let me know.

    Try re-installing itunes on top of the current itunes (do not un-install itunes).

  • I changed my gmail password after suspicious activity was detected.  It works fine on my computer but my iphone 5 doesn't recognize my new password ("cannot get mail" message).  I've tried changing my phone settings to the new password, but no good.

    I changed my gmail password after suspicious activity was detected.  It works fine on my computer but my iphone 5 doesn't recognize my new password ("cannot get mail" message).  I've tried changing my phone settings to the new password, but no good.

    Hello there dinadinadina,
    It sounds like you have modified the password settings for your Gmail account after changing the password. Thats where I would have started too. Next I would restart the device and test it one more time, and then remove and add the account again in Settings:
    Get help with Mail on iPhone, iPad, and iPod touch
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Tap the affected email account.
    Tap Delete Account.
    Add your account again.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I was wanted to update my iphone but the computer doesn't detected?

    was trying to update my iphone with new software and backed up and everything but then something happened and the computer doesn't detected oit but is shows is charging and on iphone screen says connect to itunes?

    Your iPhone has probably gone into recovery mode. Since, you have already backed up the iPhone there is nothing to worry about. Please follow this article, it would certainly resolve your issue
    http://support.apple.com/kb/HT1808
    Feel free to reply if you have any confusion.

  • My iPhone won't turn on and iTunes doesn't detect it.

    So I recently won an original iPhone in an auction on eBay (for parts or not working.)
    The seller mentioned that it gets stuck on the apple logo which it does, and iTunes also doesn't detect it.
    I really need help, how can I restore the phone?
    I really need this, as I can't call/text anyone at the moment!
    Please help!

    If you're sure it's charged, then there's a problem - perhaps why it was put up on eBay.
    Does it have a sim card installed?  Is there absolutely nothing coming up on its screen (is it black)?  Or do you still get the Apple logo?  It may previously been jailbroken, in which case we can't help.  I would suggest that you contact the provider on eBay and ask about jailbraking.

  • My iphoto program on my Imac doesn't detect my iphone 4s

    my iphoto program on my Imac doesn't detect my iphone 4s

    Open iPhoto, Preferences, General, select dropdown list Connected camera opens: iPhoto

  • URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

    My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
    I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
    I've tried switching to another USB port of my MacBook. No luck.
    My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
    I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
    Urgent help needed & appreciated. Millions of thanks in advance.
    Gary

    1. I used both cables - theirs & mine ... and on several macs
    2. yes, same cable for wall & mac
    3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
    anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

  • Since last update on itunes, my PC doesn't detect any of my devices. HELP!

    Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

    Hello andreaparra,
    Thanks for using Apple Support Communities.
    I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
    Take care,
    Alex H.

  • Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

    Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

    Good Morning Denise -
    Sorry to hear you are having issues connecting to your Wi-Fi network.  I'll include a few more things that you can try to troubleshoot this below.  The first thing that I'm wondering is if you cannot connect to your Wi-Fi at home -- are you able to connect to a different Wi-Fi network (at work, a local coffee shop, etc.)?  That would be one of the first things to try.
    Turning the modem and router in your house of and then on is also a common step as it "reinitializes" everything.  Hopefully, one of the steps below will help you with this.
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    http://support.apple.com/en-us/HT204051
    Restart.
    For more help, try restarting your device, router, or cable/DSL modem. After each step, check to see if you fixed the issue.
      • Restart your iOS device.
      • Unplug your router and plug it back in.
      • Unplug your cable or DSL modem and plug it back in.
    Still can’t connect?
    Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
    Get more help
    Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
    http://support.apple.com/en-us/HT202068
    All the best,
    - Judy

  • Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen.  Even ending a call is difficult as the screen blanks out within seconds

    I have to use the Keypad a lot when making calls.  Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out.  Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions.  Back and forth just trying to enter the options is a pain.  Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
    If I use the Speaker function the keypad works; the speakler phone is not alway appropriate. 
    It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle.  This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates.  It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem. 
    I'm not sure if it's a hardware or software (design) issue.

    It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
    Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

  • My Iphone 3G don't detect my Jabra BT2010 headset

    I have a Jabra BT 2010 Bluetooth headset. When I turn on my bluetooth of my Iphone it don't detect my headset.
    I've look on the website of Jabra and it says that the BT 2010 is compatable for the Iphone 3G but still it will not working.
    Can someone help me?
    Greetz Kai

    Folks..
    There was a post similar to this, but was lacking something that worked for me specifically. From the Apple site http://us.jawbone.com/pairingguide.aspx the following will pair the Jawbone (original at least) to the Iphone. I had similar problems with not being able to pair until I came across this:
    Apple iPhone
    _*Set the Jawbone to Pairing Mode._*
    For the Original Jawbone, press and hold down the Noise Shield button for at least three seconds until the LED Indicator Light flashes red.
    For the New Jawbone, press and hold down both the NoiseAssassin™ Button and the Talk Button for at least three seconds until the LED Indicator Light flashes red and white alternately.
    From the iPhone Home screen, touch Settings.
    Touch General.
    Touch Bluetooth.
    Turn Bluetooth on. (The iPhone will search for nearby Bluetooth devices.)
    Touch Jawbone on the list.
    Enter the PIN number "0000".
    Touch Connect.
    The Jawbone should now be paired with the iPhone.
    I hope this helps someone - it helped me.
    Thanks to all who posted before me.

Maybe you are looking for