My iphone 3g says no service what do i do?

My iphone 3g says no service what can i do to get it to work help please?
Also my camera is stuck on shutter

This happened to me a few years ago... I had to call the Network that I was on at the time. Don't know if this is the case but it's always work a go :-)

Similar Messages

  • HT5569 My iphone is saying no service what do I do

    My iphone is saying no service in the top left corner what do I do

    ask your phone carrier.

  • TS4148 my iphone is saying no service if i put a sim what should i do

    my iphone is saying no service if i put a sim what should i do i tried rebooting it and other stuff but it stilll doesnt work

    That is a carrier feature, you would need to contact your cell phone provider.

  • IPhone 6 saying no Service need help to get it working agian

    still no joy i have been in to a local EE shop and got a new sim card its still saying No Service. what is the wait on a new sim card activation?

    Right day 3 with this issue went agian in to a EE store last night on my way home and tested the issue phone with a working EE sim card and it worked fine (so the phone is fine and working). so the sales person had a look at the submissinon of the sim update (or activation) and the request has been put thought and was told to wait a few hours for it to refresh. So i waited a few hours and still nothing. so i called tech support i was told that there is a issue with my account this an issue that quite a few iphone users are having the lady on the phone said that this issue would be resloved this morning after 8am and still no signal (still saying no service). has any one got any update on when my service will be back to normal? 

  • My Iphone 4 says "No Service"

    My Iphone 4 says "No Service"  I've sleep and away, rebooted, restarted network setting, taken the sim card out.. what else can I do? or do you think it is a hardware issue and I have to go to apple?

    It very well could be a problem with your carrier. But try turning the phone off and on and even take out the sim card. Then put the sim card back in and power it up again.

  • HT1937 my iphone still says No Service after i unlock it

    my iphone still says No Service after i unlock it

    Settings > General > Reset > Reset Network Settings
    Remove and reinsert the SIM.
    Replace the SIM.
    Contact the carrier to troubleshoot the issue.

  • When i update my iphone it say error 1015 what is this please help me

    when i update my iphone it say error 1015 what is this please help me

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    http://support.apple.com/kb/TS3694#error1015.

  • When i try to us my email account on itunes or on my iphone it says please review what does this mean and how can i sort it

    when i try to us my email account on itunes or on my iphone it says please review what does this mean and how can i sort it

    BEfore you try to Restore it, try a simple Reset.
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • IPhone 5 says "No Service" after unlock

    Hello,
    I recently bought a secondhand iPhone 5 from my girlfriend which was locked to the Vodafone UK network. I'm currently with Virgin Mobile UK so I looked into getting the iPhone unlocked to use with my current SIM.
    I came across a seller on eBay who unlocks iPhones and has very good reviews, so I purchased an unlock request through them. Yesterday morning I received a message from the seller informing me that the iPhone was ready to be unlocked and gave me instructions on how to complete the process.
    When I connected the iPhone to iTunes, I was greeted with the "Congratulations, your iPhone has been unlocked" message. However, when it comes to inserting a SIM from a different network, it just says "No Service" in the top left of the screen.
    I've seen quite a number of threads about this issue and I've tried several different methods of resolving it. I have tried:
    Trying multiple SIM cards (it will work with the Vodafone SIM I have but not with ones for other networks)
    Toggling Airplane Mode on/off
    Resetting the network settings
    Erased all content and settings
    Restored the iPhone via iTunes (iTunes is up-to-date)
    I'm quite stuck on what to do now. I've contacted the seller who's assured me that the phone is unlocked and send me a "GSX Report" (whatever that is). Any help or advice would be much appreciated.
    Many thanks

    Just wanted to give an update on this for those who may be experiencing the same problem.
    I spoke to someone from Apple a few days ago who tried to help me resolve this. They confirmed that the phone was unlocked. After going through some of the fixes I've tried already, they suggested it may be a problem with the SIM cards I was using and recommended getting a brand new one to try.
    I got my new nano SIM through from Virgin Mobile yesterday, transferred my number and contract across and now it's all working perfectly.
    I'm not really sure why people on here were so reluctant to give me advice on what to do. When I told Apple that I got the iPhone unlocked through an eBay retailer, they didn't question it at all. They said nothing about it being hacked or that I should have gone through the carrier, and they assured me that the phone was completely unlocked.
    Oh well. I'm glad it's working now. Thanks Apple!

  • Iphone 3gs says no service

    Even after powercycling repeatedly, resetting network settings, resetting all settings and replacing SIM card, my iphone 3GS still says No Service.

    Here's what you do
    1.Make sure your phone is not plugged into the computer.
    2. Put the iPhone into recovery mode (this is NOT DFU mode). Do this by
         a). Hold down both the power/sleep button and the home button until the screen turns black/off
         b). As soon as this happens release the power button but NOT the home button
         c). If done correctly then the Apple logo will appear, KEEP HOLDING THE HOME BUTTON and eventually a connect to itunes graphic will appear. You can release the home button
    3. With the connect to itunes graphic on the screen, plug your phone into the computer. iTunes will start up if it is not already on, and then will say the phone needs restoring. Ignore this and COMPLETELY quit iTunes.
    4. With iTunes off and the graphic still on the phone screen, hold down both the power/sleep and the home button again for 9 seconds (count 100, 200, 300...) or until the screen goes black
    5. When the screen goes black release the home button straight away.
    6. It will start up with the iPhone activation screen ignore this. iTunes should have started up, if not do so. Go to the iPhone tab and either resotre from backup or set up as a new phone.
    You're welcome

  • IPhone 3gs says no service and cannot activate it.

    I am trying to activate my iPhone 3gs and it says 'No Service' and when connected to iTunes it says that there is no sim card installed. I think it is on i.o.s 5 but not entirely sure as i bought it off of eBay and fixed it.
    When i try to activate it on wi-fi it says the activation server is currently down.
    Thanks for any advice you could give me on how to get it working

    Here's what you do
    1.Make sure your phone is not plugged into the computer.
    2. Put the iPhone into recovery mode (this is NOT DFU mode). Do this by
         a). Hold down both the power/sleep button and the home button until the screen turns black/off
         b). As soon as this happens release the power button but NOT the home button
         c). If done correctly then the Apple logo will appear, KEEP HOLDING THE HOME BUTTON and eventually a connect to itunes graphic will appear. You can release the home button
    3. With the connect to itunes graphic on the screen, plug your phone into the computer. iTunes will start up if it is not already on, and then will say the phone needs restoring. Ignore this and COMPLETELY quit iTunes.
    4. With iTunes off and the graphic still on the phone screen, hold down both the power/sleep and the home button again for 9 seconds (count 100, 200, 300...) or until the screen goes black
    5. When the screen goes black release the home button straight away.
    6. It will start up with the iPhone activation screen ignore this. iTunes should have started up, if not do so. Go to the iPhone tab and either resotre from backup or set up as a new phone.
    You're welcome

  • Why is my iphone 4s saying no service all the time?

    I brought a Iphone 4s on ebay they said it had no signal and the image showsed it was connected to the carrier but no signal bars. when i got it is says no service why. it is a o2 sim same as what they had.

    So what did o2 say when you called them?
    Part of many problems when you purchase a iphone from a non authorized dealer.

  • IPhone 4S says "No Service"?

    I reset iPhone settings.
    I reset iPhone network settings.
    I took out SIM card to see if it's fine.
    I switched it with my sister to see if it worked, and it did.
    It still says "NO SERVICE" or "Searching..."
    Any ideas what I can do to fix it?

    NoteFiasco wrote:
    Any ideas what I can do to fix it?
    The first thing you should do is contact your carrier.

  • Iphone 4s saying no service

    Had a new iphone 4s and its saying no service. Had this yesterday and I know it says wait 24 hours but it still is saying no service.

    Not sure what you mean by "registered."  Did you activate the phone in iTunes or with your carrier?  Do you have the proper SIM card?  Did you contact your carrier to verify the status of  your account?

  • Iphone 5 says no service even if sim installed or not installed please help

    My iphone 5 running ios 8.1 says no service even if sim is installed or not installed. normally iphones say no sim when sim tray is out or empty but it says no service.I ve tried to reset network settings put on airplane mode but still the problem persists please help

    In order until the problem is resolved:
    Remove the current sim, clean the contacts, re-install the sim.
    Take the iPhone to your wireless provider to get a new sim installed.
    Take the iPhone to a physical Apple store for evaluation. Make a Genius
    Bar appointment beforehand to avoid delay.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/

Maybe you are looking for

  • Do i need another Virtual machine rather than sharepoint server to install workflow manager ?

    Hi ,      I have installed sharepoint 2013 on a single server with a built-in-database. And i have installed OWA in another virtual machine. Now i am trying to create a workflow. I have downloaded and installed sharepoint designer and workflow manage

  • Should I buy the old MacBook Pro(non-Retina)

    I want to buy a new MacBook but very confused with which model to buy. I was very keen on MacBook Pro (non-retina) because of it good specs and the flexibility it provides for hardware upgrades. But with the launch of new MacBook Pro Retina models, I

  • Photos app no longer displays transparent areas of photo properly. How to fix?

    Hi whenever I download images to my ipad with transparent backgrounds (for use with Photoshop for example), the ipad used to display the transparent area properly as white. Then when you tapped, it would display them as black. For some reason, it now

  • Cisco Linksys EA6500 Smart Wi-Fi Router AC1750 (STRICT NAT TYPE XBOX 360)

    Hi All,         I have 2 kids. Each with his/her own xbox. One Xbox gets an open NAT Type OPEN and the 2nd Xbox gets a STRICT NAT type. I had the same issue with the other Cisco router I had, but thought an upgrade might fix the problem. Plugged up n

  • Auto Click of a button

    Hi All, I am performing an extension through OAF. I would like to automatically click a button in my process request method. Actually I would like to call all the code what is called at the click of a button(seeded functionality). please can someone