My iphone 3g stuck in apple logo how can i fix this ?

in the middle of jailbreak my iphone 3g is stuck in apple logo then i turn off my iphone and its not fixed please help how can i fix this problem and it is not connect in computer and itune ?

We are not allowed to address jailbroken iPhones on this forum.  It would violate the terms of service.

Similar Messages

  • 4s bricked after trying new update, stuck with black screen with apple logo how can i fix this

    Update bricked my 4s
    phone , stuck with black screen with apple logo .. 
    how can I fix this

    Greetings r1042,
    Welcome to the Apple Support Communities!
    I understand that your iPhone is not booting up past the Apple logo. In this situation, I would recommend working through the troubleshooting steps located in the attached article.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Have a great day,
    Joe

  • I have an iPhone 3g that keeps crashing and getting stuck on the apple logo - how can I fix this?

    will restoring to factory settings help? Can this be rectified by sending the phone back to apple and it being repaired?

    This forum is not staffed by Apple.  It is a dialogue with other iPhone owners. 

  • My ipod touch is stuck on the apple logo, how can i fix this?

    My ipod touch wasnt working so I tried resetting it, now it is stuck on the apple logo. I tried connecting it to itunes but it is not showing up.  Any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I recently restarted my iphone and now all that appears is the apple logo how do i fix this problem

    i recently restarted my iphone and now all that appears is the apple logo how do i fix this problem?????

    Plug it into your computer and restore it.

  • My iphone 5 camera is not working how can i fix this problem ?

    My iphone 5 camera is not working how can i fix this problem ?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • My reset/sleep button on my iPhone 4 has just stopped working, how can I fix this??

    My reset/sleep button on my iPhone 4 has just stopped working , how can I fix this??

    Hi Hamish1P,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like an app you installed is not working. I would recommend that you read this article, it may be able to help the issue.
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Cheers,
    Mario

  • I cant signed on the game center on my iphone.which is a japan lock how can i fix this?

    i cant signed on the game center on my iphone.which is a japan lock how can i fix this?

    Hi, bamboo64. 
    Try closing all open applications in multitasking and power cycling the device.  Once this is done test the results.  If the issue persists, I have included a couple troubleshooting articles that I would recommend going through. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jason H. 

  • On my iPhone 5s it says no service how can I fix this?

    on my iPhone 5s it says no service how can I fix this?

    Hi
    These are the recommended apple steps for no service see if any of this works:
    http://support.apple.com/kb/ts4429
    Hope this helps

  • My iphone 5s is using excessive data, how can i fix this?

    my iphone 5s is using excessive data, how can i fix this?

    What are you using the data for?
    Go Settings>Cellular>Use Cellular Data For>Turn off the unwanted apps that use your Data.

  • "could not backup the iphone because an error occured." how can I fix this?

    My iphone will not backup to my computer, when I try it says "could not backup the iphone because an error occured. how can I fix this?

    Hello there Justin,
    I found a nice lil gem about troubleshooting backup issues with iTunes from an iOS device. Named iOS: Troubleshooting backup issues in iTunes it can be found here http://support.apple.com/kb/ts2529.
    Here is a general over view of what the troubleshooting will entail. Each section has instructions in the article.
    Simply restarting the computer and the iOS device may resolve a backup issue. After restarting, attempt to restore again. Learn how to restart your iOS device.
    To perform the rest of steps in this article, you need to be logged in to the computer as an administrator. If you're not sure if you have administrator access, contact the owner of the computer or the system administrator.
    Collapse All Sections | Expand All Sections
    1. Back up your backup
    2. Update to the latest software
    3. Disconnect other USB devices
    4. (Windows only): Check for Layered Service Providers (LSPs)
    5. Check security settings
    6. Back up using a new user account
    7. Reset the Lockdown folder
    8. Windows only: Update your USB chipset drivers
    9. Back up on a different computer
    All the very best,
    Sterling

  • I have a 1st generaltion apple tv which was recently changed from HDMI to component cables to connect to TV; now it will not remember my server password or my apple ID information which has to be re-entered everytime I use apple tv; how can I fix this

    I have a first generation apple TV. recently I have rto change from HDMI input to my TV to a component imput. Now my apple tv will not rememebr my sertver password or apple ID which I have to re-enter everytime I use Apple tv which is annoying; how can I fix this?

    Changing the video connection has nothing to do with the passwords.
    Are you certain it is a 1st Gen ATV?

  • Front Camera on iPhone 4s flips pictures horizontally (mirrored) how can i fix this?

    I have used the front camera many times and the pictures have come out the same way it looks on the screen. Recently, just today, the camera takes the picture but when i go to the photo library it has been mirrored, (flipped horizontally). This never occured before, how can i fix this? The other camera works fine.

    take a look here:
    https://discussions.apple.com/thread/2491655
    It was, you just didn't notice it

  • My MacBook Air won't start it's grey with apple logo Howe do I fix this?

      I have 2008 MacBook Air today I can't start up. When I press the power button it shows gray screen with apple logo and that thing spinning . How do I fix this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • HT3376 I am not receiving emails in my Mail account.  However, I am receiving them on my web based yahoo account and on my ipad.  The other strange thing is that on my Mac, I have been receiving emails from Apple.  How can i fix this problem?

    I am not receiving email messages in my Mail account on my Mac OSX.  However, emails are being received on my ipad and my yahoo web site.  Also, all emails from Apple are going through in my Mail account.  How do I fix this problem?

    Well, the other person said theirs was working now. On yours let's try this...
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

Maybe you are looking for

  • Printing tax amount in SRM ECS PO

    Hi Guru's Can you please let me know what needs to be done to print tax related information like "item is taxable/non taxable", "tax amount" or "tax code" in SRM ECS PO Printout regards deepu

  • MTP cable for ONS15540 ESPx OADM and LCMB

    I will be doing some lab testing for ONS 15540 ESPx.Need to connect the LCMB direct to OADM using MTP cable without going through the cross connect drawer as describe in the hardware installation manual. Looking at the cable spec on some brands I'm e

  • How to auto create a global variable with specific variable name in a global vi ?

    how to auto create a global variable with specific variable name in a global vi using lv ? Because i need to add a lot of global variable in this global vi. But you know, if  i manually add them , it will be a much time-costing work. So i want to use

  • Group pricing discount

    Hi team, We wanted to know if there is a way to group all the items of a same family together and make sure that discounts for the family are done in a global level rather than a plant level and maintain conditions for this Regards Nevin

  • PLAYING MUSIC WITH MY BB 8100

    I suddenly noticed that my BB 8100 no longer play a music to the end as usual. It rather stops on its own accord and returns to the home page just like that. I  will really appreciate how to get this rectified cos i love playing music with it. Moreso