My iPhone 3Gs, after update to iOs 5.1, will not connect properly to the Alpine Bluetooth.

Now My iPhone will send only phonebook via Bluetooth, but not dialed calls or missed calls. Please help me!

touch me wrote:
it says ICCID: unknown
Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

Similar Messages

  • How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    What "auto shutdown problem" are you talking about?

  • I have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

    i have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

    touch me wrote:
    it says ICCID: unknown
    Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • It seems my iphone 3GS has lost all software.. it will not let me restore the firmware on itunes? what is the best thing to do?

    it seems my iphone 3GS has lost all software.. it will not let me restore the firmware on itunes? what is the best thing to do?

    Any error numbers given?
    If yes, check this article:
    Update and restore error messages on iPhone and iPod touch
    Has any modified software been installed before you updated?
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • My iPhone 4S after Update to IOS 6 Wi-Fi Not Working

    My iPhone 4S after Update to IOS 6 Wi-Fi is Off ( Not Working ) But When i Downgrade to 5.1.1 Wi-Fi is Working. I Could not figure out what is the issue. Does any one Facing the same problem. or Have Solution.????

    The iPhone is not JailBroken. what I did is, on Thursday i:e 20th Sept. opened itunes and Restored (Restore + Alt ) By selecting the 5.1.1 firmware file from Itunes LIbrary.

  • Unable to restore iphone 3GS after updating with iOS$

    I have a 32GB iphone 3GS purchased online in hong kong and therefore fully unlocked. I updated the software with iOS4 and now it will not fully restore and the error message is "error 29". The phone serial number, phone name etc have all been deleted.

    OK, so nothing else was working so I took my phone into the Genius bar and explained what had happened. The Genius said He was unsure what error 1013 was so he looked it up and explained "It's an error related to the baseband and that more than likely the phone was unable to communicate with Apple servers as Apple had the phone marked as non existent"
    He continued to explain that there was a fix he could do but would be quicker and easier to replace my phone. He did so and I left happy.
    I recomend you just take your phones in if you are having this same issue!

  • My new iPhone 4s paired with my iMac but it will not connect to transfer files by bluetooth. It says the iMac is not supported!

    My iPhone 4s will pair sucessfully with my iMac, but it will not connect so that I can transfer files via bluetooth. It says "bluetooth network not available" or "iMac not supported". Just insane. What to do now??

    I can't pair my iphone 4s with my imac.  It is very frustrating.  I can walk by anything resembling a  bluetooth and my iphone with pair...but not with my mac.  Any assistance would be appreciated.

  • Cannot use my iphone 3gs after update to iOs 6

    hey i m havin an iphone 3gs 32GB which i tried updating to iOs 6 and i was able to update my device but then its saying failed to activate your iphone install sim and all dat i have a sim installed n ive tried both the methods of activation i.e through wifi and by itunes didn help so i tried DFU thing and restartd the whole procedure ...i have 3 iphones 3gs 4 and 4s i was successful in updating 4 and 4s it was fluid but this is not working in my 3gs it says contact apple support

    Did anyone figureout how to fix this issue? Please let me know.

  • Can't activate the iPhone 3GS after updating to iOS 5

    Hi All,
            I updated my iPhone 3GS to iOS 5 and i got the setup screen for the language and region and eventually i can't activate the iPhone
    as the iTunes says " there is no sim card installed in the iphone that you are attempting to activate "
    However the iPhone is already unlocked and i've been using it with 4.3.3 and also 4.3.5 and it was absolutely fine.
    Now i keep rebooting it and removing the sim card (which is working on another handset alreay) and it says the same msg
    PLEASE HELP !!

    First off, if you're using stuff like Redsnow and Ultrasnow you have violated any kind of warranty you had. This is no longer Apple's problem so look for help elsewhere. Second, you should have known that if you try to upgrade an illegally jailbroken or unlocked phone with the stock apple update, you would lose both the unlock and jailbreak. Obviously you're baseband is messed up and if you flashed it with the iPad 6.15 baseband you're out of luck ever trying to update the iOS version legitimately since you can't undue a baseband flash. You should have known that before you started messing with it. So either get a legit contract with AT&T, sprint or Verizon or try to salvage your mess through a jailbreaking/unlocking forum. You won't get any help here my friend.

  • I have an iphone 4s after update to ios 6.1.3 not getting all text

    I have an iphone 4s and after the last software update to ios 6.1.3 I am not receiving some texts sent to me and some of my texts are not received.  I have an iPodtouch (not updated still on ios6), that is getting the texts that my iphone isn't and delivering texts that my iphone isn't.  I can only use the iPod touch with wifi.  I really need my iphone to receive and send all my text. I'm missing meetings because of this. This is affecting my business! Please Help! Thanks.

    This is really likely to be more of a carrier problem than an iPhone problem so I would recommend that you talk to them. However, it would be worth doing a reset on your iPhone to see if that improves things. Do this by pressing the Home button and the Sleep button at the same time for about 15 seconds or so, until the  apple logo comes up then release them. The iohone will then reboot. This might fix your problem but if not, talk to your carrier.

  • After updating to iOS-6 WiFi does not connect automatically.

    After installing the new operating system, I noticed that my iPhone 4S does not automatically reconnect to my WiFi at home.
    I have to manually connect it each time.
    Anybody notice this?
    Any patch?
    Marco

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    http://support.apple.com/kb/TS3694#error1604

  • Listening to itunes on my iphone 4, since updating to ios 5, it will stop playing but shows the triangle like it is still playing.

    Does anyone know why my music keeps stopping randomely on my iPhone 4? It just started since updating to the latest ios. I think it is only happening when it is a playlist of some kind, Genius or my own. Inconsistently I can get it to start playing again by hitting the shuffle, repeat, genius, or next but there is no pattern. Sometimes it is not even playing the song it says it is. It is very annoying.

    Apple has not announced any new iPhones ,the terms of use of this forum ban speculation of Apple product plans etc..
    personally I like to have the latest and best

  • New software update just reset mi iphone 3gs to its original settings my Itunes will not connect to device....please help

    when I do get a response it says.....unknown error 0xe8000001

    See Here for Error Messages 
    OxE   =   http://support.apple.com/kb/TS3221

  • I am unable to activate my iphone 3gs after updating ios 6.1.3

    i am unable to activate my iphone 3gs after updating ios 6.1.3?

    The activation servers were down for a bit yesterday.
    Try again.
    A SIM is required for activation. If problems continue, the two most common activation issues are the result of a hacked or jailbroken device.

  • HT201317 How to recover photos from photo in Iphone 3GS after updating to the IOS 6.0.1?

    How to recover photos from photo in Iphone 3GS after updating to the IOS 6.0.1?

    Same problem here, and it's not isolated.
    https://discussions.apple.com/message/20228281#20228281
    I believe you will find you can again sync Photos if you delete the "iPod Photo Cache", but predict that any subsequent attempt will fail.  In my case, the enxt sync removes all the photos again - I've seen other reports of error messages upon sync.  Mine just fails silently. :-)

Maybe you are looking for

  • Unable to login in EP 6.0 after system refresh

    After performing the system refresh of EP 6.0, completed the post system copy steps. Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page. please help me what could be the reason.

  • System Image Utility "volume on diskxsx failed to mount"

    I've been trying to create a NetRestore image using System Image Utility (SIU) for the past couple of days, but no matter what I do it fails.  I was oringally using OSX 10.8.4, but have now upgraded to 10.8.5. After reading through the logs, I can se

  • Error message whentrying to connect or synch to 8310

    I have an 8310 with v 4.2.2.170 firmware.  I am using the latest desktop v. 4.6.0.12(may 22 2008).  I have been synching with my Outlook calendar and contacts on my Vista notebook without any problems until today.  When I try to connect I get a messa

  • Blank Acrobat with blank Errormsg in PDF-Preview

    Hi all, i am starting to use Adobe LiveCycle Designer ES Version 8.2.1.3144.1.471865 and Adobe Acrobat 9 Pro Version 9.0.0. Any File i like to see a preview in LiveCycle Designer only shows an Acrobat window with blank screen and blank Errorwindow li

  • ERROR: stopping on error 7777 during MAIN IMPORT

    Dear Expert, When i am applying Basis and ABAP Support pack 700-17 levels i am getting following red( In Bold) entries in the action log.    Import phase 'IMPORT_PROPER' (30.12.2008, 14:56:58)    Error during executing the tp command 'tp IMPORT all C