My iPhone 3GS has been reset but the apple with the black background has been on for about 6 hours please help !
My apple iPhone 3GS has been reset , it had been on the black background with he white apple for a long time , please can someone tell me how I can speed this up ?
See this:
iOS: Unable to update or restore
Similar Messages
-
My IPhone 3GS JailBroken turns on but shuts off then the black background comes up with white apple logo? And then turns on again? Does it over and over! HELP! Why Does This Happen And Is This Repairable?
Let Me Know! Cheers
Ryan Crawt
[email protected]Its against the forum TOS to talk about J/B phones. you will have to use google to resolve your issue.
-
My Macbook Pro is stuck at the loading screen (the apple with the spinning circle underneath). I went to Best Buy to get help, and they told me to call Apple Help and ask them to 'restore my unit', which he said is a matter of only about 4 mouse clicks. If it was so easy, I didn't understand why he couldn't do it for me. But he said that even though I have a 3 year warranty and protection plan with them, they were not responsible for this type of problem. Whatever.
Anyway, so I called Apple Help, and even though he was familiar with my problem, it's been more than 90 days since I purchased the laptop, therefore I'd have to set up a service agreement to get his assistance, meaning I'd have to PAY him. So now i'm stuck, and I'm just hoping somebody knows what to do to help me
I don't have any disc that I apparently need, and I don't remember ever getting one. However, if there is some other way to fix this issue, please let me know. Thanks for your time and assistance
BrennaHI, have you blown the dust out lately?
Does it boot better/further if allowed to cool?
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047
https://discussions.apple.com/message/15223603#15223603
https://discussions.apple.com/message/15499912#15499912
https://discussions.apple.com/message/15613068#15613068
https://discussions.apple.com/thread/3270112
https://discussions.apple.com/message/16053892#16053892
No power light at all...
https://discussions.apple.com/thread/3692775?tstart=0
It can show on any G5, and even many other computers & electronic devices of the period.
http://www.macintouch.com/reliability/pmg5.html
http://lowendmac.com/ppc/power-macintosh-g5.html
And see this last one in particular...
https://discussions.apple.com/message/16781690#16781690
Heat gun better...
https://discussions.apple.com/thread/3916312?tstart=0
If we don't get more help or answers here, feel free to join my site & ask...
http://x704.net/bbs -
I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them. -
I have attempted everything! I have reseted it manually and even restored it on iTunes. Still Nothing. Someone please help!
Let the battery fully drain. After charging for an hour try the reset (both buttons) and restore as necessary.
-
My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
Erase and Install Snow Leopard
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. When completed quit DU and complete the Snow Leopard installation. -
My computer kept freezing so I turned it off. Restarted to white screen. Restart again holding command,option P&R. Now just apple with the spinning circle. Any ideas how to fix?
Read here > Resolve startup issues and perform disk maintenance with Disk Utility and fsck
-
IPhone 3GS - volume controls working but actual volume stays the same
Hi
My iPhone 3GS has been exhibiting a strange phenomenon for the last couple of days. The volume in my heaphones is fixed. I can use the volume control buttons or the on screen slider just fine, they're responsive in terms of animation (the buttons show the increasing/decreasing number of white squares and the slider allows me to move the dot and the blue line extends accordingly), but the actual volume only changes when I'm using the speaker, but not when I'm using the headphones. The only actual volume control I have using the headphones is sliding the volume down to zero, which also produces a loud click in the headphones.
The issue is system-wide and as such affects all apps, including Spotify, iPod, VLC, various games and other music/video apps.
The headphones in question are brand new and work fine with other equipment. I've also tried with other headphones, with no change.
Any help would be appreciated. And yes, I've restarted the phone. I've contemplated reset/restore, but I wanted to check if anyone knows of a less time-consuming solution.
ThanksNo, that's not it.
The volume is not locked using the Volume limit, and even if it were, that wouldn't explain why it's fixed at one (rather loud) level. The volume limit function is just there to limit the upper bounds, not set it to a constant level.
Thanks for your reply, though! -
I am trying to update a 4s. The update did not work for some reason. Now I need to restore the iPhone. When I connect the usb to the computer and phone it says I need to restore. So, I click to restore. It starts extracting the software. But I am continually getting the same error message that it cannot complete for unknown error. I have been working on this for 5 and a half hours. I'm tired, mu husband needs his phone and apple support is a joke and of course I can't find any answers anywhere. Please help!
Hi MB2751,
As an iPhone user myself, I know it must be very much a problem to have the phone out of service because of an error such as you are seeing. Let's see if we can get you back up and running.
I would suggest that you troubleshoot using the steps in this article -
If you can't update or restore your iPhone, iPad, or iPod touch
Thanks for using Apple Support Communities.
Best,
Brett L -
i wanted to reset my iphone 4 from the phone settings and everything started okay until i realised it was not working at all now my phone is tuck with the apple logo and won't start can not connect to the itunes store as well what to do please help
Place your iPhone into recovery mode as described here. You may have to try to enter recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808 -
iphone 3gs can not talk on or recieve calls, but every thing works, apps., music, internet, ect.. put sim card in another phone and able to call and recieve calls, what happened.
Reset phone - press both home and sleep/wake buttons until the Apple logo appears in 10-15 seconds.
Settings > General > Reset > Reset Network Settings -
I have a iPhone 4s that I am trying to syn. when I look at IPhone content it shows music, but there is this symbol A dotted circle and these will not play. Please help as I am frustrated.
Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards. -
Please help! I have a camp tmrw and idk how to fix my phone..
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these. -
Help please
Reinstall OS X using one of the following. The first is for Snow Leopard and the later for Lion/Mountain Lion.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Since I updated IOS 7 in my iPad, it doesn´t work and appears the Apple logo in the screen all the time. Any solution?
1) Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
NOTE:
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download
Maybe you are looking for
-
Can't see location of item with long name in Spotlight search?
I can find the location of an item in a Spotlight search by selecting it and holding down the Command key, whereupon its position is displayed at the bottom of the Spotlight window. However, if the item has a long name, the location is "offscreen" as
-
my hard drive is full. can i move my library to a stand alone hard disk? how can i do this? thanks.
-
Help me to best allocate drive resources for scratch disks between 4-6 drives on my system?
I have several 7200 RPM drives as follows OS/Program drive Audio drive (367 GB free space & used for Cubase in conjunction with another OS drive; my OS drives are removable because it's simpler than partitioning) Video drive (237GB free space) Still
-
Created a Vlan but doesnt show in "Show Vlan" output
I created the following vlan on one of my cisco WS-C6504-E switches. interface Vlan352 description SecurInfra ip address 10.14.36.2 255.255.255.0 ip helper-address 172.17.40.40 ip flow ingress ip flow egress shutdown When i do a no shutdown and type
-
Again hashcode() question ?
thanks for your several answers, but i want a clear and definitive answer for this assertion ? i want to use instance of ObjectX in a HashTable. if i overide the equals() methode for objectX, have i to do the same for hashCode(), and if yes how can i