My iPhone 3GS is disabled

I put my password in wrong too many times and my iPhone 3GS got disabled and I don't know how to fix it.

Please read this article about restoring your device from recovery mode.
http://support.apple.com/kb/ht1808
good luck.

Similar Messages

  • IPhone 3Gs is disabled and asks for Passcode

    Hi there,
    my iPhone 3GS is disabled after keying in a wrong Code for several times. It was disabled firstly for 1 minute, 5 minutes, 15, one hour and so on.
    I have solved the problem with the SIM card by keying in the PUK and everything should be fine but the iPhone is still asking for the Passcode.
    Could anybody help me here what kind of pascode it is asking for?
    I honestly have no clue.
    Thanks a Million in advance and best regards
    Zuse

    http://support.apple.com/kb/ht1212

  • My iphone 3gs is disable and asked to connect with itunes

    my iphone 3gs is disable and asked to connect with itunes

    See this document
    iOS: Forgot passcode or device disabled

  • My iphone 3gs says disabled

    my iphone is saying disabled because i forgot my passcode

    Then sync it with the iTunes you've been using with it in the past and perform a restore.

  • Iphone 3GS is disabled

    How do i unlock, i have connected to itunes and it is asking for a passcode but my iphone is only allowing emergency calls. Please advise how i can unlock the Iphone so i can use it?

    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    You will have to restore the iPhone.
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • I need help with my iphone 3gs. It is disabled for 22 million mins.

    Hi there, My iphone 3gs is disabled for 22 million mins and that is like couple of years(i think) and i dnt think i can do that. I have tried connecting it to Itunes but it wont let me becaise it is disabled. PLZ help!!
    THANK YOU

    Copied from the article mentioned by wjosten: iOS: Wrong passcode results in red disabled screen
    If you don't have access to a computer
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    If you have previously synced your device with iTunes
    You may be able to reset the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    If you have never synced your device with iTunes
    Connecting the device may result in this error message: "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.

  • I have completely disabled my iphone 3gs. It says "Iphone is diabled connect to itunes", but when I connect it to itunes, itunes says "could not connect because it is locked with a passcode you must enter your passcode on the iphone before it can be used.

    My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks

    You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808

  • In iOS 5 on the iphone 3gs, how does one disable voice control, not voice dailing.  I have never wanted or used voice control please help me disable it.

    In iOS 5 on the iphone 3gs, how does one disable voice control, not voice dailing.  I have never wanted or used voice control please help me disable it. 

    are you talking about voiceover where the phone is reading things out loud to you? you have to double tap things in voiceover in order to select them. you'll need to go to settings > general > accessibility > and turn off voiceover there

  • IPhone 3GS  blocked and disabled

    Hi everyone
    I got an iPhone 3GS but it's blocked and disabled, I don't know why it's blocked I just bought it like that because it was cheap, anyway I forgotten my password and now it's disabled, I can I get it working without losing any of my photo, music, apps ect..
    I just really need to get my photos off it then I don't mind what i do with it after
    PLEASE HELP ME!!

    Contact Orange and find out their requirements for removing the SIM lock.
    Only the carrier to whom the device is locked can officially unlock it.

  • My iphone 3GS gives me this message: Your Apple ID has been disable. How can I get into the apps?

    My iphone 3GS gives me this message: Your Apple ID has been disable. How can I get into the apps?

    Apple ID FAQ
    http://support.apple.com/kb/HE37
    Apple ID Security Alert
    http://support.apple.com/kb/TS2446

  • IPhone 3GS iOS 6.1.3 -  camera doesn't work. Shutter won't open & camera button becomes disabled. Pls advise what to do? I have already tried resetting the phone several times.

    iPhone 3GS iOS 6.1.3 -  camera doesn't work. Shutter won't open & camera button becomes disabled. Pls advise what to do? I have already tried resetting the phone several times.

    Hello Kunmon,
    The following article provides some useful troubleshooting that can help get your iPhone's camera working correctly.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • On my iphone 3gs, i cannot update my apps; i get the message that my apple id has been disabled

    i cannot update my apps nor get new apps on my iphone 3gs. i get the message that my apple id has been disabled.

    You could always try getting in contact with iTunes Support via expresslane.apple.com to see if they can look into your account and see why it is disabled.

  • Disabled iPhone 3GS

    iPhonee 3GS is disabled, cannot do a restore because it was never synced to a computer.  How can I restore it without having to pay Apple money to do it?

    You can restore it.
    Why do you think that you would haev had to sync before to restore?
    Open itunes, connect iphone, click restore.
    If you are unable to restore then follow directions here:
    iOS: Unable to update or restore

  • Partially disabled Safari on my iPhone 3GS

    Somehow (I think) I managed to partially disable Safari on my iPhone 3GS.  I can browse to any URL, however, after the page loads, I cannot scroll or "click" on any links.  Safari and Restrictions settings are OK--not causing the problem.  Any other suggestions?
    Geoff

    Clear Safari history/cookies and data. (Settings>Safari)
    Close all apps from MultiTasking and make a Reset.(Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.)

  • IPhone 3GS disabled

    iPhone 3GS disabled and states to connect to iTunes on phone, but iTunes states you need to input your phone passcode.  The main problem with this scenario is that I can't get to the point where I am able to input the passcode.  What do I do?

    You need to put it into DFU Mod First...!!Go here for a complete guide
    http://www.mycybertricks.com/2012/05/re-enable-disabled-iphoneipod.html
    It will really help you I enabled mine from here!

Maybe you are looking for

  • Problem-taking a long time to open Bex Analyzer

    We upgraded from BW 3.1 to BI 7.0 SP9, Front End SP 9, Patch 3, Revision 370 and have a problem when we try to access Bex Analyzer.  The response time is very poor. It can take as long as 3 minutes (or longer) for Bex Analyzer to open after we click

  • Spry Menu issues in Internet Explorer

    I have created a Spry menu for my website and although the menu appears to look fine in Firefox and Safari, the formatting changes in Internet Explorer(IE). 1.sub menu bar is not dropping down below the main menu bar it is appearing at the top of the

  • Open PDF in a new window

    Hi. I'm trying to create a PDF and open it in a new browser window. I've already achieved to create the PDF and it seems to work fine when it opens in the current browser window but that's not what we are looking for. This is the code where I call th

  • Hi - I own a CanoScan 8800F scanner. I need help, I want to scan about 200 registrations.

    As a membership secretary I receive about 200 registrations over a two month period. How can I scan them in and index them? Is there a software that will work with my CanoScan 8800F that will facilitate this? Thanks, Bill

  • Schedule lines in VA03

    Hi There, is there any function module that brings me the schedule lines INCLUDING the calculated amount of delivered quantity? I need this information for every schedule line item. It isn't available in VBEP... Thanks so much