My iphone 4 back side names and logo light how to change panel

my iphone 4 back side names and logo light how to change panel

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

Similar Messages

Restore Backup log file back SID .log and be*****.ant

Dear all,
I have to restore sap oracle online backup from source server to target server. We have taken the backup of source server on tape. Now we have to restore that tape backup on target server. We don't have back<SID>.log and be*****.ant with us.
How can we restore the back<SID>.log and be****.ant tape first by which we can start the restore online backup on target server or without this back<SID>.log and be****.ant can we restore the backup on other location ( which i tried but not working, it is asking for back<SID>.log file.
Thanks
Ward

Hi Ward,
As long as you have complete oracle datafiles, restore without logfiles can be done.
1. As a precauition, copy all /oracle/<SID> to a safe place during offline state (SAP down, Oracle down)
2. Replace each datafile from tape to the current datafile location. e.g /tape/sr3.data1 -> /oracle/<SID>/sapdata1/sr3_1/sr3.data1
3. Make sure that archive logs is complete from the point where you start online backup.
4. sqlplus /nolog
5. startup mount
6. You will likely found error with controlfile. Replace all oracle controlfiles from tape backup, then repeat the startup
7. recover database until cancel using backup controlfile
8. choose the archive where you want the point of restore
Good luck

I can't remember my administrator name and password. How do I back door to find it?

I can't remember my administrator name and password. How do I back door to find it?

http://support.apple.com/kb/ht1274

My computer died when I was syncing music from iTunes onto my iPad. I can reset it and get it running, but I want to get back my photos and videos. How do I get back photos and videos in recovery mode?

My computer died when I was syncing music from iTunes onto my iPad. I can reset it and get it running, but I want to get back my photos and videos. How do I get back photos and videos in recovery mode?

Clucktastic wrote:
How do I get back photos and videos in recovery mode?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

HT204053 Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

My user name and pass word have not changed I can't get into my gmail

My user name and pass word have not changed I can't get into my gmail

Can you access the email on a computer using a web browser meaning are you sure it is not a problem on the gmail end?

I spent ages renaming and sorting my holiday photos in correct order but when uploaded to print they reverted to the original name and order? How can I stop this happening?

I spent ages renaming and sorting my holiday photos in correct order but when uploaded to print they reverted to the original name and order? How can I stop this happening?

When you "rename" a photo in iPhoto you're adding a Title to the shot, not renaming the file. This si quite standard metadata in photography, but it appars that it's getting lost in the upload/at Snapfish process.
You can use the Titles as filenames if you export using the File -> Export command. It's one of the options in the export dialogue. You can upload the exported items.
Regards
TD

My iPhone 4 has lost safari and App Store , how do I retrieve

Can someone help me, as my iPhone 4 has lost Safari and App Store, how do I retrieve?

They have not. He probably moved them by mistake to another Home page or put it in a folder.
Try Settings>>General>>Reset>>>Reset Home Screen Layout.

My Iphone has no name (Iphone) at back side

I bought an Iphone on contract of 3mobile network. At that time I didn't realise that my Iphone has no name at the back side. Now I am confused to have a fake Iphone or Real one.

Yesterday I went to Apple Store at Westfield Statford City. I saw my iphone to them and you are not gona believe their almost 25 staff members were surprised to see ever. They couldn't answer me why that word is not there. Everyone was checking my iphone, where its came from? Is it 8 gbs? They asked me so many questions and last they told me to book an appointment with our "ginious".

Iphone 4, back side shattered... does apple care cover this?

So I am wondering if apple care protection would cover the back side of my Iphone 4 being shattered. The screen and front side are fine so the phone is not hindered at all, but I would still like to get the back side of it fixed as I have this phone on contract for another year and a half. Please let me know!!!

If you previously bought AppleCare+ for it, accidental damage is covered. Regular AppleCare doesn't cover accidents.
(75602)

When I log onto my macbook, my user account isn't showing up. All that shows up is a gray screen with only two boxes saying "Name" and "Password". How do I fix this?

There was one time where my wi-fi wasn't connecting so I tried to turn it back on. A window popped up but I had alrdy clicked enter before I read it, but it said something like "...will change settings, is that okay...?" And then wi-fi still would not connect. So I tried restarting my computer, but when it turned on, my user account did not show up and all there was on the screen was two boxes that asked for name and password. I was the only person using my macbook so I never set up a password for it. Has anyone had this problem? How do I fix this?

Since I'm not in front of your computer I can't tell what you see - I can only guess and give a hint. So once again, if the disk name on your Mac is "Macintosh HD", when you boot in Recovery Mode, and start up the Terminal in "Utilities" menu, and then type in the command:
    df -k
you should see a list of "volumes" - one of which is named "/Volumes/Macintosh HD" (but yours could be anything) and in that folder there is another folder called "Users" and in that folder is the names of the home directories of the user accounts (and the names that you can enter into the login screen) that you are looking for. So if you are not familiar with using the Terminal you should say so and I can give more details. But assuming you're OK with typing in commands to theTerminal this is what I would try:
    ls -l /Volumes/Macintosh HD/Users
and you should see something like the following (my disk name is "Yosemite" so I typed "ls -l /Volumes/Yosemite/Users")
ML9Book:~ xxxx$ ls -l /Volumes/Yosemite/Users
total 0
drwxr-xr-x+ 11 Guest      _guest   374 Oct 25 19:23 Guest
drwxr-xr-x+ 33 Jack       staff   1122 Oct 24 10:49 Jack
drwxrwxrwt   13 root       wheel    442 Dec 27 2013 Shared
drwxr-xr-x+ 38 admin      staff   1292 Oct 25 16:59 admin
drwxr-xr-x+ 15 x13        staff    510 Oct 23 22:41 x13
drwxr-xr-x+ 12 514        staff    408 Oct 23 12:24 x14
So now reboot your mac into normal mode - and you will see the login screen with the two empty boxes.
So the above output tells me that there are 3 users - Jack, x13 and x14 (there is always a Shared user and there might or might not be a Guest user since it depends on how your setup was setup) - and these 3 are the names that I could try and enter into the login screen (in the top or first box). You can try no password, but I don't think you can create accounts without passwords, so this will likely fail. In that case you need to reboot in recovery mode and run the Terminal command again (from the Utilities menu) and do a resetpassword command. Another window will pop up and from there you select the Volume (in my case I selected the Yosemite volume - in your case you would select the "Macintosh HD" if that is what your volume name is). Then select the user account you want to reset the password from the drop-down list of user accounts (it will show you the long and short names, and the short name is what was in the listing above from the "ls -l" command), then enter the new password in the indicated box, and then enter it again in the next box, to make sure you didn't make a typo, and enter a password hint in the last box (optional). Then click the "Save" button and you will see another dialog box pop up telling you that the password was changed but not the Keychain password (hopefully you remember this one) - click the OK button then reboot back in normal mode (click on the Apple logo in the top left corner of the screen and click on Restart).
Does this help?

HP 6940: carriage stuck at left side, resume and power lights flashing

I've used this printer under ubuntu/linux for about 2-1/2 years. Color printing has always been a challenge, I get about one usable page per 5 test pages. About a year ago, it stopped printing; hp-info (part of the hplip package) said the color cartridge was defective. I was able to get black&white printing by removing the color cartridge.
This week, I had to print some stuff in color. I pulled the color cartridge out of its ziplock, re-installed it, and ran a quick cleaning. A test print showed that wasn't enough, and I ran a full cleaning, after which I was able to print a good test page, and then one page of my job.
When I tried to print the second page, nothing happened, and the resume and power lights started flashing. I cycled power on the printer (I have to do this very frequently, even for black and white jobs), but it didn't fix the problem. I pushed resume, but no dice. I pulled the back cover to check for paper jams: nothing jammed. Replaced the back cover, pulled the paper from the tray: nothing jammed. Replaced the paper in the tray. Pushed resume again: it made noise, but didn't clear the problem.
I opened the lid, and the carriage was all the way to the left-hand side. Pushed resume: a small plate in the loading dock at the right-hand side moved forward and then back, but the carriage stayed at the left-hand side. Tried (gently) to move it to the right, but it's firmly in position.
hp-info now says:
"status-desc Paper or cartridge carriage jammed"
The color cartridge is an HP cartridge, and came with the printer. The paper is HP paper.
Any suggestions?

Hello there! Welcome to the forums @roberts460
I would suggest checking out the guide below for troubleshooting blinking lights to try and help resolve the issue you're having with your Deskjet 460c.
Blinking Lights on the HP Deskjet 460 and Officejet H470 Mobile Printer Series
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Back side of z3 is broken, can I change cover?

2 days after buy my nice sony xperia z3 the back side glass with a small impact has been broken link. Now I have ugly smartphone z3 and I looking for a way to repair or change fully cover.
Is there any spare part to change this cracked z3 phone body?
Here in Iran there is no spare parts...!

There is the possibility that your phone wont be waterproof after you do this......perhaps it may be, perhaps not......also your warranty with Sony may be voided if for instance you have to send it in for repair for something in the future & they notice it has been replaced but not by themselves....not trying to scare you, just make you aware

Satellite A660-1H7 Function Buttons and Logo lights went out

This may seem a little silly to experience users of Toshiba laptops BUT I got my laptop recently, and few days ago I lost the lights on my Function Buttons (next to the power button) plus the 'satillite' logo at the bottom left corner.
I don't know if I did something to switch them off?
Saddly I don't know how to get the lights back on.
Can anyone PLEASE help and tell me how (step-by-step if poss) to get them back.
Thank you in advance.

THANX MasterG...
I followed your advice, I found the Backlight.exe in the TBS folder. I clicked on it and double clicked but nothing happened... I decided to click the file next to it called *Dimmer* and suddenly all the lights came back on.. Bingo..!! I still can't use my eco button for some reason, I used to be able to press that button it would turn green and my eco settings would kick in.. I am having to do this via my hidden icons... But it has had the desired affect....
I was wondering if you could make any suggestions to Speed Up the time it takes my laptop to load up... It seems to take a long time for an i5 processor..
I did access MSConfig and the Start Up Tab I have some 37 different items listed there... Apart from my anti-virus which I know I need to keep I dont know what to remove from the list so I can speed up the loading proceses ....
Thanks again...

I have a D-LInk router that has lost my network name and protection. How to I re-set it up?

THe protected network name is gone and now my computer just shows me connected to "dlink"
How do I re-set it to the protected network? I tried to use a "wizard" i found on the net but it said the emulator wouldn't work and to go back to the CD. I have no idea where the CD is

I got to the page but it did not seem to give me an option to do what I want. I could see how to reset the ROUTER ADMINISTRATION password (for which right now there is none) but there as nothing about setting up my network name and password, which was lost. Or is this the same thing as the router configuration password? (I was thinking that referred to a password that would allow me to change router settings)

My iphone 4 back side names and logo light how to change panel

Similar Messages

Maybe you are looking for