My iPhone 4 can not be read by my JVC car radio after upgrading to 5.0
My iPhone 4 has always worked with my jvc radio until I went to 5.0 radio just says cannot read and phone says cannot playI whish Apple would fix this problem.
I figured out my problem. When I upgraded to 5.0 my ITunes did not sync correctly so when I tried using it with my Jvc car radio it locked it. So I restored my iPhone and tried it again with no luck so I reset my radio and what do you know it works perfectly now. So if anybody else has had a similar problem try it before replacing your head unit.
Similar Messages
-
IPhone 5s no longer works with my JVC car stereo after upgrading
Hello!
I updated my iPhone 5s to ios8 last Wednesday (the 17th). When I drive, I synch my phone to my car stereo system (a JVC unit -- I can't recall the model number but it was installed just a year ago). After the upgrade, it worked fine. But on Sunday morning the phone experienced a hard crash and I had to reboot it by pressing the home and sleep buttons together. The phone came back without any further incident.
When I tried to make a call later that night I found that instead of my phone being active on my phone it tried to play music instead. I couldn't figure out how to stop this, so I turned off Blue Tooth. And now, when I try using the phone the Blue Tooth seems to synch up, but the phone cannot dial out -- I get a "called failed" message on the car stereo screen. If I look at the phone, I see that the phone has been activated, but it isn't dialing out. And then the phone will make bogus calls to an unrecognized number, or to a non-number. It will do this every 30 seconds or so. If I dial the phone manually, the Blue Tooth seems to work and I can talk to people hands free as usual. But when the call ends (and I don't always have a "call end" button showing on the JVC screen) the phone will again attempt to dial a bogus phone number.
The only thing that has changed is I upgraded my iPhone to ios8. Are there known issues around Blue Tooth connectivity? I also reset my phone to factory specs and reinstalled ios8 from my PC via the Lightning cable. This didn't change anything (I did that on Sunday evening). The Apple trouble shooting pages are of no help with this (I've already looked at them). I would really appreciate any help anyone could give me -- I think I've tried everything I know to do.
Thanks!I upgraded to ios 8.0.2 and it still won't work. The phone will synch to the JVC blue tooth, but will not dial out. The phone is activated and it has the screen that indicates it is dialing but it isn't. And then the blue connection drops and won't reconnect.
-
When syncing photos getting error iPhone can not be read from or written to
I am getting an error only when I try to sync photos. Error is iPhone can not be read from or written to. This only happens when I am syncing photos, so far everything else syncs fine. I have an iPhone 3G S. I had some pictures on the iPhone that I deleted, still no sync. I am restoring the iPhone right now.
I am having the same issue. I get "iphone unable to sync, an unknown error occurred (-51)" I have restored twice and once even set up as a new iphone. Nothing so far has worked. If anyone has any suggestions, please pass them on
-
why does my iphone 5s not displaying apps on my jvc car stereo. these apps worked with my iphone 4s?
Blackberries were designed at a time when cellular data was very expensive. They don't do nearly as much as an iPhone, in part, to conserve data use. All modern smartphones will use more data than a Blackberry unless you do almost nothing.
You do not need to quite apps. Almost no apps run in the background.
Here are Apple's tips on iPhone battery use:
http://www.apple.com/batteries/iphone.html
If you are really only getting an hour of battery usage and not just engaging in hyperbole (), you should make an appointment with the Genius Bar at your local Apple Store. -
My Iphones can not be read in itunes....tells me to restore iphone
iPhone 4S and 5S does not work in itunes.
It works, then it doesn't work. The 5S is brand new. I restored my iphone 4S it worked, but the next day it didn't.
I tried everything and can not get itunes to read our phones......is there a problem with 7.1.1 or latest itunes. This is ver fustrating. Took me forever to restore my phone and restore back up. I don't want to jail break, I want a easy solve. Went to drivers and no options there. Please help. JenStar
The error:
iTunes cannot read the contents of the iPhone "Jenstar" Go to the Summary tab in iPhone prefences and click Restore to restore this iPhone to factory settings.OK here it is....for anyone else having this issue.
Talking with some Mac pro's here.
There is a corrupted itunes song in my play list, in order to remove it you need to do a reset on your phone, no need to do a factory reset. Just go into General/Reset/Erase All content and Settings. Once your are reseting and restarting you can back up your phone with iCloud back up. (This is way it's good to backup your phone)
Next is to locate the iTunes song that is corrupted....I know it's one of the songs from Frozen, but which one.
OK here is my problem, paying money for corrupted music is not my idea of fun. There should be someone checking these, lost out on the album because I can't find the corrupted song that causes my phone to go nuts. All shows OK in itunes.
I know have access to itunes on the computer as long as I don't download the corrupted file. -
I am having trouble syncing iphone to itunes. I have been able to in the past but sometimes I get this error message...iphone can not be synced. An error occured while trying to write to the device.
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357 -
This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.
You can't, you will need to get a new remote.
-
All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4. Newest OS. Never happened with old OS! Cycling phone on/off does not help. Ignoring message causes phone to cycle off then on. After first time this happened, I restored. Six days later...same problem! Clearly a new fix is necessary. Suggestions?
I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc). Any suggestions? What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?
-
"Device can not be read from or written to" error keeps coming up...
I have recently updated to the 3.1 firmware on my iPhone 3G (after a couple failed attempts).
The problems seemed to start there when the update froze midway through and I had to try a couple more times. After I did and restored my settings, iTunes said that my backup file didn't work. I tried a couple more times to restore from the backup but ended up having to restore as a new device.
Now, as I try to sync all of my, well, everything, I keep getting an error message.
It synced all of my contacts, apps, calendar, etc., but when it gets to my music and videos it will sync a bit of it before giving me the error messages:
"Cannot sync ___, the required disk is not found"
and immediately after,
"Device can not be read from or written to."
I've tried syncing my iPhone many times, and these errors keep coming up.
What should I do?Hi,
This article: http://support.apple.com/kb/HT1207 provides tips that will resolve issues causing this message to appear with iPhones and iPods.
Make sure the iPhone is directly connected to a high-speed USB2 port on the PC, using the cable that came with it.
-Jason -
I purchased four movies from iTunes yesterday and want to sync them to my daughter's new iPod Touch. I have been able to sync apps, music, contacts, etc. but keep getting a message stating the movies can not be read or written. I was able to sync one movie, a digital copy that I used the code to copy from iTunes earlier today without a problem. Can anyone help?
thanks for helping, I am able to watch the movies in iTunes, but, I can't choose the create iPod or iPhone version in the advanced menu. Do you have any other suggestions?
-
Touch can not be read from or written to
After upgrading to iTunes 7.7.1 and iPod 2.0, I can not sync at all anymore. I get an error window telling me that my sync failed because my iPod Touch can not be read from or written to. I applied the "5 Rs" troubleshooting tips, to no avail. (5 Rs = restart, reset settings, reset iPod, remove files, restore).
I went to the Genius Bar & they were able to eventually get it to sync, but replaced the unit anyway.
I got home with my new iPod Touch and it had EXACTLY THE SAME problem as my old one did - the "could not read from or write to" my iPod Touch.
I have a new appointment for next week at the Genius Bar.
Has anyone else experienced this problem or know what the fix might be?
I want to try restoring to the iPod 2.0 or prior iTunes software, but can not figure out how to do that.
All help/suggestions are welcome!
Heidione of the solutions fixed the error on my itouch:
Symptoms
When using iTunes to sync photos to iPod and iPhone, iTunes creates a folder called iPod Photo Cache in the top level of the folder you selected for your photos. Picking another folder to sync does not erase the previous iPod Photo Cache. Depending on how many photos are being synced, the hard drive could fill up.
Products Affected
iPhone, iPod with color display, iPod photo, iPod nano, iPod nano (2nd generation), iPod (5th generation), iPod (5th generation Late 2006), iPod touch, iPod classic, iPod nano (3rd generation)
Resolution
Drag the folder named iPod Photo Cache to the Trash or Recycle Bin.
If you're syncing from an iPhoto `08 album, use these steps to find the iPod Photo Cache:
1. Go to your Pictures folder (~/Pictures) and locate the iPhoto Library file.
2. Control-click the iPhoto Library file and choose Show Package Contents from the shortcut menu.
3. In the iPhoto Library window, locate the iPod Photo Cache folder and drag it to the Trash.
4. Close the iPhoto Library window. -
My iPhone can not support to iTunes
Hi, I am using iphone4 more then a year, now my iphone can not connect with the itunes, please help me to rectify the problem.
{iTunes could not connect to this iphone. An unknown error occurred(0xE8000012)}
This is what i received form iTunes, once i connect with my iPhone.
ThanksIs your iTunes in the Latest version? the latest version is 10.6.3.25 Same thing happened to me. all i did is update it. so install the latest version ok? Hope this Helped!
-
My Iphone can not be turn off, and I need to restart it.
It is stuck in the white screen with the black apple in the central area.
Help , advise?
iPhone 5sThank you so much! IT helped!!!!
Thank you, thank you, thank you.
Now my phone is Ok Again
BEst Regards! -
Get error message: this iphone can not be synced. The required file is missing. Help.
Can not sync my 3GS. Get error message: this iphone can not be synced. The required file is missing, What file?
If you're on a mac, close iPhoto if it is open. In Finder open Pictures and right-click on iPhoto Library. Select Show Package Contents. Right-click the iPod Photo Cache folder, select Move to Trash. Now sync and the "this iphone can not be synced. The required file is missing" error should be fixed.
Maybe you are looking for
-
I can access my Google Mail and Google Home Page just fine using IE. I am currently using Firefox version 8.0.
-
tell me the useful tables for doing bdc for migo.urgent
-
JSP code: <%@ page import="javax.xml.transform.*,javax.xml.transform.stream.*,java.io.*" %> <%TransformerFactory tFactory = TransformerFactory.newInstance(); Transformer transformer = tFactory.newTransformer( new StreamSource("book.xsl")); transforme
-
While Export the data to MS Word - How to avoid the Frames ???
Hi All, I export the data from Crystal Report XI to Word document (doc) file , i used Text objects in the Report , in document file it's converted to Frames and overlapped with other frames(so some data are hidden). is it possible to avoid the frame
-
Sort-Merge outer join, why? when?
Hi All, How Oracle runs/optimizes outer joins has always been my subject of curiocity. In Oracle documentation V 10.1 -> Performance tuning guide -> Chap. 14 ( The Query Optimizer) -> Go almost at the bottom There is a small section of "Sort Merge ou