My iPhone 4 crashes very often (3-4 times per day) and sometimes (2-3 times per month) all my apps disappear and I have to restore them with iTunes. I downloaded all the system updatings and I also tried to restore my device, but I still have this issue

My iPhone 4 crashes very often (3-4 times per day) and sometimes (2-3 times per month) all my apps disappear and I have to restore them with iTunes. I downloaded all the system updatings and I also tried to restore my device, but I still have this issue

If you haven't already, try restoring your iPhone as a new device, not from a backup, and with only the apps Apple includes. Then see if the problems persist. It's possible that a corrupted file on the iPhone is causing the problems, and that could perhaps be coming back onto the iPhone if you're restoring using a backup. Problems with an app could also be causing problems. If the problems persist after restoring the iPhone as "new", then you almost certainly have a defective iPhone and will need to contact Apple for servicing.
If the problems go away after restoring the iPhone as "new", then you can start putting your other apps back on and see if the problems reappear; if they do, you probably have a badly-coded app.
Regards.

Similar Messages

  • My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. Solutions?

    My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7.  There's just a thing that pops up and says that in order to activate banners and push notifications I have to connect the app with iTunes. The thing won't go away no matter how many times I push ok, and it doesn't give me another option. Solutions?

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

  • Regrouping one time by month all the documents of a customer in One Invoice

    Hello all,
    Everything is in the tittle!
    I need to define for customers to regroup all the invoicable documents in one invoice, one or two times by month.
    Please light me,
    seb

    Hi, this we can do by collective invoicing.Configuration steps:-
    Transaction VD02 - Change Customers - tick Billing and filled in the Customer Code, Sales org., Distr.channel and Division then hit enter.
    Look for field name Inv.list sched. - you must filled in the Factory Calendar that you are currently using.
    You can simulate the collective billing in transaction VF04 - Process Billing Due List.
    During simulation, if the billings cannot be combine, the system will give you this message,
    Different header fields                             $000000001                    $000000002
    Combination criteria in the billing          xxxxxxxxxxxx123             xxxxxxxxxxxx125
    Criteria to satisfy for collective billings:-
    Billing document type is the same.
    Reference document type is the same.
    Item category in the reference document is the same.
    The system combines into one billing document all transactions for the same customer and same billing data. If the header data and the header partners for the specified deliveries or sales orders are identical and if the requirements for splitting do not apply, one billing document is created for all the deliveries or sales orders.
    example-The system determines that deliveries 1 and 2 had the same bill-to party, and therefore combines the deliveries in one billing document.
    Delivery Order 1     - |
    >   Invoice
    Delivery Order 2     - |

  • My Ipod touch 2nd gen will not sync for some reason to itunes. I've tried almost every possible solution I can find on the internet. The ipod charges fine when connected and Windows also recognizes it as a device but itunes refuses to. What should I do?

    Any help would be greatly appreciated.

    Thank you for the reply. Your answer crossed my mind but I havent downloaded songs in a while so I never paid attention to whether it was syncing or not. However, in my sync history I see that it successfully synced 3 months ago....

  • I tried dowloading Skype yesterday and my Safari browser crashed.  It gives the message "Safari quit while using the librooksbas.dylib plug-in.  I trashed Skype but still have the browser problem.  I also tried logging in under guest, and no Safari.

    I tried dowloading Skype yesterday and my Safari browser crashed.  It gives the message "Safari quit while using the librooksbas.dylib plug-in.  I trashed Skype but still have the browser problem.  I also tried logging in under guest, and still
    no Safari.

    Julie --
    Backing up QuickTime's advice --
    Unless your bank's website is insecure, you're fine.  Go up to the Safari "Search" bar and type in Rapport.  You'll be amazed.  It may  "work" on PCs, but definitely not Macs.  And it's not needed for Macs.

  • HT201407 hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any id

    hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any ideas on ho

    I wa aware
    I was rather hoping it might generate some info  that might be of use to help OP  it doesn't make much  sense as it stands without a  tedious  Q&A session

  • TS1567 Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all my disap

    Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!

    Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Iphone 4s begin to crash very often

    Hi, I have my iphone buy used a pair of months ago. It work very good, but now starts to crash very often, may be after download lots of app.
    Is there a software that make diagnostics to understand whats'on or the app that makes crash?
    Safari and also many app or games close himself. Sometimes the camera too, when I take a pic and press the shoot the camera app close.
    Some help before I reset all, if there is a software or other way, and why this happen.. ( I even thought ios device doesn't crash)
    ty

    ok I know sometimes you can turn off the phone and when comes on it works, but I don't want to 'hack' the problem, but solve. ty

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

    I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

    You did turned in Settings > General > Usage > Battery Percentage: ON?
    Try a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • I have a ipod touch 4gen and whenever i sync it, i just lose all my memory... and im also trying to restore my memory but don't really know how... how do i do it?

    i have a ipod touch 4gen and whenever i sync it, i just lose all my memory... and im also trying to restore my memory but don't really know how... how do i do it?

    Only sync chosen songs. Even with that I had a bad song once that was corrupted and it blew the ipod touch's mind. Can't remember how I found the song, but deleted it off the computer and was able to get a fresh copy off this quite old CD. Also, settings-general-usage, you can see which files are gathering up in your memory. There are some surprisingly large programs.

  • I backed up my ipod and i lost all my music. And its not letting me put my music back on my iPod and i also tried to buy a song from iTunes but it didn't download to my IPod. So now i dont have any music on my ipod now

    i backed up my ipod and i lost all my music. And its not letting me put my music back on my iPod and i also tried to buy a song from iTunes but it didn't download to my IPod. So now i dont have any music on my ipod now

    What exactly happens when you try to sync?
    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod

  • Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    HELP! i can't get ANYTHING done in the new muse - keeps closing.  once it crashes - i can't get the file back open!
    i've lost all my work!
    from my desktop - when it stared happening was with the updated version:
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:36:38 2014
    ========================================
    [00:00:42.416] Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:success size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014 highestUID: 3548
    [00:01:03.898] Preparing to Save As over "\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse" exists: true
    [00:01:17.516] SaveAs complete for file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' file size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highest UID:3551
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:07 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Error: CSI: IMS: Connect: Error Code: I-200 Error Message: No Account
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Unknown IMS error 'SHARED_NOACCT_ERROR' has occurred when retrieving IMS token.
    Build 232: Mon Nov 3 19:41:57 2014 UTC: Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version. size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014
    Build 232: Mon Nov 3 19:41:57 2014 UTC: This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version.
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:43:17 2014
    ========================================
    [00:00:21.481] Opening file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' with status:success size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highestUID: 3551
    [00:00:30.373] AssertInDebug: Unable to run recovery. User file remains locked after 5 second pause.-assertInDebugOnly+DataBase/recover+MuseSite$/recover+MethodInfo-2886+DataBase$/run Recovery+apply+UIComponent/callLaterDispatcher2+UIComponent/callLaterDispatcher+end stack
    [00:00:30.404] Failed to recover file:\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse
    [00:00:30.420] Calling openConnection for file that doesn't exist? C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ Parent folder exists.
    [00:00:34.429] open of SQL connection failed for C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ
    [00:00:34.429] Failed to open mini-save connection B "C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ" Doesn't exist. Folder exists. error:SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'
    [00:00:34.429] EXCEPTION:[SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'-SQLConnection/internalOpen+SQLConnection/open+DataBaseConnectionWrapper/o penConnection+MethodInfo-28954+EventDispatcher/dispatchEventFunction+EventDispatcher/dispa tchEvent+MethodInfo-28938+end stack
    [00:00:34.445] AlertAndExit because of: [SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'

  • I have the PE Mac 8 version and have downloaded the program.I opened the  initializer which halts 90% through checking my system profile. I have all the system requirements, what is wrong?

    I have the PE Mac 8 version and have downloaded the program.I opened the  initializer which halts 90% through checking my system profile. I have all the system requirements, what is wrong?
    Message was edited by: denconbe

    Yes I remove everything. I also have purchased the program and because I had this problem with the purchased DVD
    I downloaded the program thinking the purchased DVD was at fault but as I obtain the same result with both, there must be
    something wrong with my computer set up or it might be OSX 10.6.1 that is the problem! I will have to wait till monday.

  • HT1339 My iPod classic shows that memory full in "other" category however there is nothing on it. I have left it connected all day and over night trying to restore it but the progress bar  never goes away.

    My iPod classic shows that memory full in other category however there is nothing on it. I have left it connected all day and over night trying to restore it but the progress bar  never goes away. Is it shot or are there other options to restore to factory settings?

    Hi pbworth,
    When troubleshooting issues with iPod classic, it may be helpful to place the iPod into Disk Mode. For information on how to do so:
    Putting iPod into Disk Mode
    http://support.apple.com/kb/HT1363
    Thanks,
    Matt M.

Maybe you are looking for

  • Can you transfer data from one iPad to another iPad

    Can you transfer data, books and music from one iPad to another .

  • PHP in SAP Enterprise Portal

    Hi experts!!!!!!! I am making an application in php, but I need to know, who is the user that it is loggued in the portal. any idea?? thanks in advance!!! Regards

  • SAP PLM, ERP, PPM relationships

    Hi PLM experts, I have some questions about the SAP PLM products as below, would you share your insights? Thanks. 1. Most of PLM sub-modules are the functions of SAP ECC components as I see. So what's the relationship between SAP PLM and SAP ECC? 2.

  • How to know deployment contents

    My weblogic domain has some adf applications created by other people. I have not the source code. Some applications may conflict. How to know the deployment contents of these adf applications and extensions (such as soa, webcenter) of domain?

  • Import of IDOC from R/3 to XI system

    Hi All, I created RFC destination, port and partner profile in R/3 system and RFC destination and Port in XI system and Remote Logon is working on both the systems. Now i want to import an IDOC from R/3 system SAPECC6 to XI system, there i got specif