My iphone 4 did the iOS 5 update yesterday and I feel like my battery life is worse. I've only had the phone a week and I havent plugged it into itunes on my laptop at all or anything yet. Anything suggestions?
I did use a lot of apps today and such but I've only been using it for 12 hours and it's at 20%. Never had that happen. How can I fix this? Thanks
I got the same problem to. In 3mins I lost 8% of battery life I just used my phone for like a min. Had my phone for a month now and it started when I updated to ios5 and gone worse when updating to ios5.0.1.
Similar Messages
-
I just got a new phone today the iphone 5c and i plugged it into itunes. i wanted to get all of my data from my iphone 4s but when i synced my phone all of my iphone 3 data was on my new phone how do i get my iphone 4 data on my new phone?
Did you choose the wrong back up? There should be a drop box when you go to "Restore from Back up" in iTunes and your iPhone is plugged in, on the Summary page. Choose the correct back up. If you can't find one, and you still have your device, back up your iPhone 4 again and then choose that back up. Or check for an old iCloud back up if you have one.
-
i have got an iphone 4 and i have plugged it into my windows 8 laptop using the usb cable, and a message pops up on the laptop saying usb not recognized, the iphone doesnt say its charging or anything, how do i get my laptop to recognize my phone?
Start here:
http://support.apple.com/kb/TS1538 -
I just factory restored my iPod 5 touch and when I plug it into iTunes to back it up, iTunes stops responding and closes. This only occurs when the iPod is plugged in, when it isn't, iTunes works fine. I am using Windows 8 and iTunes is updated (as of this posting). Any suggestions on getting around this? Thank you.
Also, when I put it through the Windows diagnostic, it lists an "incompatible program" WHILE my iPod is plugged in.
-
I was using my iPad one morning looking at ebay, and then I locked it and came back and when I clicked the home button nothing happend. When I clicked the lock button nothing happened, when I plugged it into iTunes nothing happened and it didn't show uunder "Devices" on to side. Please help me I don't know how to fix this and it's been two days since it happened.
I would then try and do a hard reset like Fernando recomends if that doesnt work you might need to try a DFU Restore.
How To DFU Restore -
Hi, I have bought a new iphone 4s and want to give my old iphone 3gs to my wife. She has a sim card on the same network so she can put the sim in and use it straightaway but all of my data and apps stay on there. How can I restore the phone to factory settings for her to use without itunes automaticly trying to restore it to the back up data to my last back up?
Thanks in advance,
MattHi,
You will find a list of your iDevice Backups there:
Edit (Control+,) - Preferences - Devices
Delete the Backups you don't need anymore, but if you delete all Backups you can't restore your iPhone.
Hope i could help you -
So, i put a password on my ipad, and i forgot it. I looked online of all the things to do, and ive tried, them, but i haven't synced my ipad to a computer... just used it wireless. So when, i try to plug it into itunes, it says it cant open it becuase, there is a password on the ipad, which i thought once i put it into itunes it would say to restore it. i need help badly!
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808 -
Hey guys, Im expierencing problems with itunes after the latest update yesterday(1/22) and the problem im having is when i plugged my iphone into my PC today a virus detection came up and said a trojan horse was present. I also cant open itunes at all. Im confused and dont know what to do. thanks in advance
Place the device in DFU mode (google it) and restore.
-
This is so frustrating! I plugged my Iphone 4S into my computer to update it via Itunes and now it says I have to restore to factory settings and will lose all of my contacts, photos, and applications I have downloaded. All I was really wanted to do was delete photos that uploaded from my home computer and took up all the space on my phone! GRRRR I hate this
If you are using the iphone as designed then you should lose very little or nothing.
You should be syncing contacts with your computer regularly, so all of your contacts should be on your computer and you can sync them back.
You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera, most especially before any attempt to update.
You should be transferring all purchases made on your iphone to your computer: File>Devices>Transfer Purchases
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
Don't want the phone to go to sleep after plugging it into the docking station
When I plug the phone into the docking station it switches into to the sleep mode immediately: the screen goes black. This is not what I want to happen. In fact, I have a loader which uses the docking station port in the car. So, when I put the phone into the holder it goes to sleep, so each time I have to switch the screen on immediately. This is tedious. Such a behaviour is inconcvenient at home as well.
In SmartConnect I went through the options related to the desktop charger but I did not find anything useful. There are no actions like "keep the screen on" or "wake up".
Any ideas?
Solved!
Go to Solution.This could be an app acting up, just try this
settings > apps > all > smart connect > clear data > restart your phone and check again
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
'You must restore this iPod with iPod Reset Utility before it can be used with iTunes. For help, click More Information.'
When clicking for more information it doesn't allow me to download the required driver.
Can anyone help?Hello, j9friend.
Thank you for visiting Apple Support Communities.
Here is some helpful information regarding the iPod Reset Utility.
About iPod Reset Utility
http://support.apple.com/kb/ht1238
Cheers,
Jason H. -
i have got an iphone 3g and when i got it it was jailbroken so i went to restore it but it failed now it says i need to plug it into itunes all the time. what do i do?
Kidcomeleon wrote:
i have got an iphone 3g and when i got it it was jailbroken so i went to restore it but it failed now it says i need to plug it into itunes all the time. what do i do?
Plug it into iTunes. -
I connected my iphone 4s that I unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. It told me it needed 8 hours. I closed my laptop, not shut down. I re-opened the laptop a few hours later, and it wants restoring?? Whats going on?! i want my iphone back! PLEASE HELP. I'M LOST!!! (I synced my iphone to my computer if that helps at all).
Yes, and, I try to restore. I have the T-Mobile sim card in it just to clarify. It will not let me get passed that, it does not accept the t-mobile sim card. i tried restoring it using wifi, cellular, and i cant get i tunes. I am scared that if i take the tmobile sim card out and put the at&t one in just to complete the restoration process that the iphone will lock again and not read the tmobile sim card, then all my hard work has gone for nothing. ( this whole process was caused by me trying wanting to empty my pictures onto my computer because i did not have any storage space left). <--- that may not be as important, but i included it just because.
-
iphone 3gs- updated to the ios 5.0.1... since then i plugged it into itunes, an now my phone restarts itself every 3-4 minutes!!! it so annoying! its useless, i cant do anything with it. restored it 4 times and its still doing it!!! please help!!!
i contacted o2 and they said id have to pay to get it fixed after sending it away for ten days if their was a fault, when im still under warranty!! contacted apple who will get back to me!I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
Where is this iPhone from and what means did you use to unlock it?
Maybe you are looking for
-
Windows 8.1 Update Failure code: 0xC1900101 - 0x20020017
Hello, I have an HP Pavilion g6. I can't update to windows 8.1 after download it by windows store, it reboot pc and after that give me this error: 0xC1900101 - 0x20020017. Anyone seeing this issue, and if so, know of the solution?Thanks
-
Report layout in french not displaying french characters properly
Hello, I have a report layout that I have created with a 3rd party tool (j4ldesigner). All it has on it is one label (displaying a couple of french characters as a test ). Within APEX I have created a test report layout and imported it as a named col
-
Has anyone else encountered this problem? After logging into the App store correctly with user ID and password, I then go to the 'download' or 'buy' button for an app I want and the system asks me to re-enter my password for "billing" info. The syste
-
Does anyone know what kind of ac adapter I need for a ThinkPad X230t? I can't seem to figure it out. Thanks!
-
How can I hide the cursor?
I want to hide the cursor if the mouse enter some Components or a JFrame. I tried to find methods to solve my problem, but I failed. Someone can tall me how to do? Thanks.