My iphone 4 does not start, what can I do?

My iphone 4 suddenly closed and I cannot open it. What should I do?

Do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.

Similar Messages

  • My iPhone 4 will not start what can i do

    My iphone 4 will not start any suggestions

    Hold down the power and home buttons at the same time for at least 10 seconds until the Apple logo appears on the screen.  After that you can let go.  You may have to restore your phone depending on the extent of the damage.

  • I bought it for my tablet touch photoshop Positive BGH and the application does not start, what can be happening?

    gante alguien podria explicarme ¿por que puede ser que adobe photoshop touch for tablet no aranca en mi positivo BGH?

    If your iPad is an original iPad 1, that adapter does NOT work with the iPad 1.
    You need to be using this.
    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a

  • HT1843 hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

    hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

    It isn't supposed to pair with the MacBook.  You can use WiFi to connect but not Bluetooth.  You can setup a personal HotSpot on the iPhone and connect the MacBook, or setup the MacBook AirPort to create a network and attach the iPhone, and use the USB cable to connect the iPhone to the MacBook for syncing and backup purposes.
    The communications are rather limited.

  • My IPhone 3GS does not start

    My IPhone 3GS does not start. i tried to reset it, by holding the the sleep and home buttons at the same time approx 10 sec. but nothing appears...

    thanx for the sheet. i tried to restore it and place it into recovery mode. but my iphone does not show any reaction at all. itunes can not connect the iphone, due to error 0xE8000084, du you have any idea? i will now try to charge it during more hours. if this doesn't help, i will bring it to an apple store. I assume that i'll need a new battery.

  • HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

    my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

    Sounds like it may be a hardware issue.
    Please contact Apple Support in your country.
    Here is a list of numbers: http://support.apple.com/kb/HE57
    Regards
    J

  • I upgraded my iphone os to 4.01 and i have not been able to synce to my computer. The erros message I get says the Iphone connected is not recognised what can i do to solve this problem.

    i upgraded my iphone os to 4.01 and i have not been able to sync to my computer. The error message I get says the Iphone connected is not recognised what can i do to solve this problem.

    Did you try to connect in recovery mode? iOS: Unable to update or restore
    Also check here: iOS: Device not recognized in iTunes for Windows
    And make sure your security software is set up right: iTunes for Windows: Troubleshooting security software issues

  • Facetime on my iphone 4s is not working what can i do

    facetime on my iphone 4s is not working what can i do

    Even new purchases are not always fully up to date.  Check and see by going to Settings > General > Software Update and see if it says it is up to date or not.
    Also keep in mind that you need a WiFi connection for FaceTime.

  • When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

    When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

    Greetings anabeqiri, 
    Thank you for contributing to the Apple Support Communities. 
    The advice and steps in this article may help if you don't see "None" as a payment option when creating your Apple ID:
    Why can’t I select None when I edit my Apple ID payment information? - Apple Support
    All the best,
    Jeremy 

  • I need to verify my apple ID sent to me by e-mail however the link does not work.What can I do?

    hi!
    I need to verify my apple ID sent to me by e-mail however the link does not work.What can I do?

    Hi,
    See this Link on Apple ID:
    http://support.apple.com/kb/HE37
    Go to the Very Last Section "How do I verify my Apple ID by email?
    Cheers,

  • Installed new harddrive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

    I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

    Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
    you have a couple of options:
    Do a clean install of Snow Leopard via Install DVD.
    Clone your old hard drive to your new hard drive via Carbon Copy Cloner
    Or click on the link below to give you a better idea.
    Hope you get it sorted out.
    http://pondini.org/TM/14.html

  • My homebutton does not work  what can i do?

    my homebutton does not work  what can i do?

    Try a reset:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
    If the reset doesn't work, you probably have a hardware issue. If you have warranty on the iPod, the replacement will be free. If no warranty, you'll have to pay.
    http://www.apple.com/support/ipod/service/prices/
    Your other option is to use the iPod without the home button. See here:
    Hardware Defect: Home or Power Button
    (Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

  • Iphone 4 does not start, logo apple stays on screen

    Help! My iphone 4 does not start.
    The epple logo stays on the screen.
    It seems like the setup keeps repeating.

    If you haven't tried, Reset the phone by pressing the power and home buttons at the same time until the phone turns off. With itunes open try turning the phone back on if it didn't by itself. Itunes should ask you then to restore the phone.

  • NEW IPHONE 3GS DOES NOT START

    I just got my new iphone 3gs yesterday and have not even had the time to have a nice look at it coz it just does not start.
    When I put the phone to charge the apple logo appears and after that just the sign of USB connector pointing towards itunes (with the itunes logo) appears and phone stops. I had it charged for more than four hours but I don’t see the battery charging status icon anywhere.
    When I press the ON switch on the top the same thing repeats itself meaning it gets stuck in the USB connector pointing towards itunes (with the itunes logo) sign. Totally confused and frustrated. Kindly assist. Lastly as i am new to the apple brand could anyone guide me towards the Software for the IPHONE 3GS i require to install on my desktop in order to sync,email etc.thanks for the advises in advance

    Obviously it's telling you that you need to connect your iphone to your itunes to activate it, otherwise it won't work.
    Firstly download itunes, under Downloads. then install then plug in your iphone, and follow the instructions to activate it. Then you should be set and start using the phone.

  • Suddenly my iPhone does not sync   ~  what can I do

    can anyone help me
    my iPhone always would sync as soon as i plugged it but it won't anymore
    what can i do?

    1- Do you have it set as "Manually manage music and video"?  If so, it will not sync to iTunes in manual mode.
    2- If you have it set to auto-sync (opposite of #1), do you have it set to automatically launch iTunes when you connect it?  If not, the auto-sync will not automatically start if iTunes is already running, you'd have to click the Sync button to get the auto-sync to commence.
    3- Do you have iTunes set to not auto-sync devices?  Go to Edit/ Preferences and click on the Devices tab to see if this option has been set.  If so, then you must manually initiate the auto-sync (which is not the same as manually managing the device).  Or, simply de-select this iTunes option.

Maybe you are looking for

  • Filter at universe level is not working

    Hi all, I am using a filter at Universe level to exclude a list of customers and a couple of customers within the date range. This works ok for a list of customers, but customers in the date range are not excluded. Here is my filter in Universe: @Sel

  • Native extensions and captive runtime

    I'm trying to use native extensions and captive runtime. When I try to create a release, the IDE shows this message "Native extensions are being used in the project but are not supported by the CAPTIVE_RUNTIME_BUNDLE package type. Runtime issues can

  • Hi all i have a problem with my iphone 4 battery/ charging

    Hi All. i have charged the phone for a few hours now and gone to switch it on and it is still saying the battery is flat how can this be resolved or as anyone else had this same problem, i have also tryied my brothers charger in my phone incase it wa

  • Checking SecureStore files ERROR

    Hi every one , I am installing <b>Java Add-In for an already existing ABAP</b>. The installation was aborted because of this error: function InstallationScript_135_script() {     ASSERT(arguments.callee, !installer.onUnix() && NWInstall.getSystem(con

  • Concurrent we service call issue

    I am using spring2.5 framework and tomcat6 as web server. I do have a web service implmentation on this. When my consumer applications are trying to call this WS concuurently, The WS response got mis matched or one call gets others response. How do I