My iPhone 4 doesn't recognise my Sony HBH60 Bluetooth headset?

My iPhone 4 won't pair with my Sony HBH60 Bluetooth headset?
please help?

There is no logical reason why changing a sim stops the iPhone working
did they try another sim in your iPhone ,there might be a slight difference in positioning caused by the new sim
It is no good trying it in other iphones ,they are not the one not working try another sim in yours 
Once that has been tried probably Apple Store genius bar
However
Just try a reset ,hold home sleep buttons until the Apple logo appears then release ,ignore the off slider
AND did the O2  store check you have the correct APN settings in your iPhone for a PAYG customer they should have changed when you changed status with O2

Similar Messages

  • HT204368 I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am no

    I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    Is is important to note that I am not the only one experiencing this issue:
    This is a link to someone using the Motorola H19txt headset experiencing the same issue
    https://forums.motorola.com/posts/94ac15ad7c
    If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
    http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
    Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
    Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
    I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue.  I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web.  Hopefully they are already aware, but if not, maybe they will see i here.

    here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
    There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
    Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

  • Sony MW1 Bluetooth Headset

    Hey guys,
    I have just bought the Sony MW1 bluetooth headset for the many features it offers.
    I am satisfied with what it has offered till now but I am unable to figure out how to use the MP3 player functionality on it.
    I didnt get a micro-sd card nor the sd card reader in the package.
    I tried using my my own sd card to store songs but no use, the device is unable to detect it.
    Can any of tell me what should I supposedly try to get it working?
    I tried pasting the songs in a freshly formated card using FAT32 filesystem, but still the device isnt able to detect it. It says not available, tried synching using MediaGo software but it doensnt detect the device.
    I am lost.. Please people help me.. 
    Hoping for a reply.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    What kind of SD-card are you using? The MW1 supports SD-cards up to 32GB. If your headset won't detect your SD-card, I suggest that you try another one to exclude problems related to the one that you are using now.
    If you want to use the SD-card as music source, you need to press the Menu key > Select the music icon > then press SD-card.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • SOUND LEVEL LAG on Sony´s bluetooth headsets (SBH 20)

    """SOUND LEVEL LAG? - Sony's bluetooth headset""" first two positions of sound level are silent (same), next two rise level by one (but both positions have same sound level), next two again rise level by one (but both are the same) and i can continue this way till maximum sound level. Shouldn't have every position different soind level???   there´s a thread on google+: https://plus.google.com/102109235167947874965/posts/hY9mxUL5uL1

    with connected headset have problem with every app which creates sound. even in safe mode. this is reply of one of user in walkman/music beta test on google+: This is an issue with the Bluetooth stack in Android. It has been present since the Android 4.4 update I think. Maybe even 4.3. For example the SBH-20 only has 7 volume steps in total (I think). To request smaller volume steps would be out of the scope of the Walkman app. My solution was to purchase a Bluetooth headset that actually has more steps in volume. Btw since now i have not found yout how to mark people in posts. can u please give me a quick manual? thx

  • Sony ps3 bluetooth headset keeps turning itself off

    I recently purchased the official sony ps3 bluetooth headset, hoping it would also work with my mac. I've paired it, and successfully used it but the headset itself keeps turning off. Has anyone else experienced this issue?
    Thanks~

    Yes, it's fully charged. I plan on posting on the sony forums also, but I figured I'd try this approach also, given I have a feeling both companies are going to put the blame on the other. It does seem like sony's issue to me though, but you never know. I was just hoping I'd find someone who had the same experience (or a good experience where it does work) on these forums.

  • FCP 5 doesn't recognise my Sony GV-D1000 miniDV recorder!  HELP!!

    I've read about the upgrade issues with decks/cameras not being recognised after upgrading to Tiger and FCP 5 but that QT "remedy" did not wrk for me. Anyone out there that has a Sony GV-D1000 miniDV recorder and could'nt get it to work since the upgrade? What did you do? What do I do? I have so much work to do and can't get the deck to communicate!
    I have:
    G5 dual
    Tiger
    FCP 5

    Welcome to the forum!
    You'll get good advice here and it's worth a visit even if you don't have a problem - you'll learn a lot from reading the posts.
    This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
    First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
    I know you say you've tried this next bit once - but it's easy to do it wrong - so check it out:
    FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
    http://docs.info.apple.com/article.html?artnum=301852
    Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
    If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
    Still not working? Try a different Firewire cable.
    Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
    Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
    Let us know how you get on!
    Andy
    Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.1. Shake 4.1. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Hi my Mac doesn't recognise my sony handicam

    I bought the necessary gear (firewire) to connect my Sony digital handycam video camera (DCR-TRV-520e-PAL). But I don't get any response. I find it hard to admit but my Window laptop doesn't give any problems...
    Has anyone got an idea how to fix this?
    Thx Steven
    The Netherlands
    Message was edited by: stedoe

    What OS X is the iMac running...?
    What model is the Epson Printer...?
    Are you trying to connect the Printer via USB or Network...?
    see > Mac Basics: Printing in OS X

  • TS3899 iphone 5 doesn't recognise my recently changed Hotmail password - it keeps asking me to re enter, I have deleted account and re entered but it still says incorrect password

    I changed my password on Hotmail [Outlook] but my iphone continually asks me to re enter the password as it is not correct, I deleted the account and re-entered all information but it still keeps saying password is incorrect - sometimes message do come through without a problem but then it starts again saying password incorrect

    It's not a problem with the phone. The phone doesn't care what our password is. The serve is rejecting your password, not the phone. Talk to your email provider.

  • IOS 5.0 to iOS 5.0.1 on a new iphone that doesn't recognise firmware?

    Today I became the proud owner of a new iPhone 4S 64GB.
    I registered the phone as I bought direct form apple and needed to update the iOS from 5.0 to 5.0.1.
    I have spent 12 hours downloading to update for itunes to cut it off once complete and state that the firmware is not recognised. Grrrr
    I tried to update the sofware via the phone option and it says the internet is not available and yet it IS available.
    Someopne please help me force the darn thing to update

    You may have a problem with your iTunes connecting to the internet.
    Try this,
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    Now launch your iTunes and see if it is working now.

  • My Xbox Bluetooth headset works with my iPhone 4,but not my iPhone 4s,help please!?, My Xbox Bluetooth headset works with my iPhone 4,but not my iPhone 4s,help please!?

    Please help,my Xbox headset works with my iPhone 4,but not my 4s,any ideas why?

    make sure you disconnect it from 1 before trying to connect it with the other or it will fail

  • Macbook late 2008 cannot find MW600 Sony Ericsson Bluetooth Headset

    Hi,
    I am just trying to connect my new headset to the macbook but does not get listed on the device list for setting. It works fine with my iPhone 4 ...
    It works with this year's Macbook Pro.
    Please share your solution if you already solved this problem.
    Any advise is welcome too.
    Thanks and Regards

    Gave up

  • I have Oracle Wireless Bluetoth Headset NoiseHush N500 and for some reason it will not connect to my iPhone 4.  Can Apple send me a bluetooth headset that is compatiable with the iPhone 4?

    Can Apple please send me a compatiable bluetooth headset?

    This is a user to user forum.  But I'm sure Apple would be happy to send you a compatible Bluetooth headset if you purchase one from the Apple Store.  You could also order one from someplace like Amazon.com.

  • IPhone 6+ Muffled/Distorted audio cycles with a Bluetooth headset

    While using Apps like Facetime, Skype and Viber there are moments or Cycles of Muffled audio from the Bluetooth headset ( tested on LG Tone Infinim HBS900)
    The other party does not hear the muffling.
    It seems like there is a cycle or may be some sort of sleep or battery saving mechanism which triggers on and causes this muffled audio.
    Has anyone else experience this issue?

    It seems like 8.2 has fixed it but created a new problem "Facetime incoming calls default to Speakerphone while connected to Bluetooth".

  • Which is the best stereo bluetooth for iPhone 4 on the lines of Sony Ericsson MW600?

      Can anyone who has had 1st hand experience with stereo bluetooth that they have used.. come forward with their reviews on them..?  I had a Sony Ericsson MW600 which i have now misplaced... overall they do their job pretty well.. you can use the play, forward and rewind buttons.. and yes of course pick up calls to.. it has multipoint allowing you to connect upto 3 devices at once, although you cannot use all the devices at once, you need to change your device from the bluetooth inbult led menu which can get frustrating at times... but its an option nonetheless.. Also it has radio, which your iPhone does not have.. not that i use it anyways but an added feature for radio enthusiast.. They have a great battery Life too and also you can put in your own in ear headphones which i really apprecaite.. The only downside of these bluetooth are that.. they are not as loud as i would like them to be... but opinions can differ in that area...  So thats my reveiw on the Sony Ericsson MW 600.. Now can anyone suggest me something similar to buy? preferebally a bluetooth which can support other in ear headphones and are nice and loud..

    There isn't any - iPhone simply don't work proberly with a bluetooth headset.

  • What is the best stereo bluetooth headset for iphone 3gs? or 3.0 version??

    i would like to know the best compatible stereo bluetooth headset for my iphone 3gs.. since apple didn't release one.. any 3rd party headset MODEL will do.. hoping for your response..
    ps.. nokia, sony ericsson, motorola, samsung devices are included with the "3rd party devices" thanks!!! =D

    There isn't any - iPhone simply don't work proberly with a bluetooth headset.

Maybe you are looking for

  • Error code 500 internal server error

    I got a computer from my brother. It has windows 7 starter on it. It has been running fine, but now it says that the Microsoft teredo tunneling adapter driver is not working. It also gives me an error code 500 internal server error, when I try to sea

  • TOPLINK-60 when weaving activated

    Hello, environment: TL-essentials, jdk 1.5.08, windows xp SP2 i get the following error: (seems to be a problem with the valueholder....) Exception [TOPLINK-60] (Oracle TopLink Essentials - 2006.7 (Build 060720)): oracle.toplink.essentials.exceptions

  • Cannot open the file: mk:@MSITStore

    I just upgraded to RoboHelp 8 for Word (Office 2007, XP Pro) and continue to have this problem after compiling a project (Microsoft HTML) and clicking on view. One suggestion was to change the path closer to the root directory. I changed the output p

  • Error database travel doesn't exist

    Hi I currently do the tutorial about databinding but I could not retrieve pointbase travel db. Connection failed. I 've start pointbase. Before choose pointbase Studio Creator have try to connect to sqlserver. Any idea ? Thanks in advance.

  • Kanban

    Hello I am working on KANBAN process and replenishment strategy as Planned order with MRP. When i trigger the KANBAN card planned order is created.That will be viewed in the MD04 So my problem is i am not able diff between MRP run planned order and K