My iphone 4 has gone black what should I do?
Today my 1 year old iphone 4 went black (won't charge or turn on for anything) . . . what should I do? Your help is greatly appreciated!
What to do if your iPhone will not turn on
Similar Messages
-
My iphone 4s has gone black and frozen
my iphone 4s has gone black and frozen
Hi WINDSOR154!
Here is an article that will help you troubleshoot this issue with your iPhone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
My iPhone 5c has stopped charging what should I do
Either my iPhone 5c has stopped charging or both of my chargers are broke please help me
There's no FaceTime icon and no app since it's built-in.
All you need is Wi-Fi and a connection to another iPod Touch 4 Gen, iPad 2, iPhone 4 & 4S and Mac
Go to your contacts and find a friend that also has the Apple devices and Wi-Fi then tap faceTime. -
my iphone4's screen has gone black and i have received a new warrenty
If this is a Verizon iPhone 4, there is no SIM slot.
For non-Verizon iPhone 4, the SIM is on the right side.
Push a paperclip inbto the hole to eject the SIM tray.
-> iPhone and iPad: How to remove the SIM card -
my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??
christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
My ipad screen has gone black and I don't know what to do the screen still works and I can still unlock it and I can still type. But I don't know what to do can anyone help me it will be much appreciated
If the reset doesn't do it then it's possible that the backlight or another part of your screen has broken. Unfortunately it's not really user servicible. I'd make an appointment at your local apple store and have them check it out. If your device is still under warranty and they don't determine that the damage was the result of 'abuse or neglect' (their words) then it could be a free replacement.
I'd just do a backup before you take it in, just in case. -
My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?
have you tried charging the device ?
if so and it still does not work you can try a Forced Recovery..
by holding the HOME button down and plugging it into your computer at the same time..
http://support.apple.com/kb/HT1808 -
My computer is saying that I am not in the US and so I am unable to view shows, Youtube, etc. I've gone under the location settings and put US several times but nothing has worked. What should I do?
It may not be your computer telling you this, it is probably the company providing the shows to you over the Internet. If that is the case, no setting on your computer can change it because the media company is going by your network address (IP address), which is where your Internet modem (cable or DSL) connects to the outside Internet. If the location of your Internet connection appears to be outside the US (even if it is mistake), media companies that distribute shows under contracts with geographical restrictions may lock you out.
If you use a service like a VPN service, you may have the ability to use IP addresses from other countries so that you can appear to be connecting from there. But it takes some setting up. -
I'm trying to backup my iphone and restore it because the screen has gone black. It won't allow me to do anything without putting in the passcode. I can't put in the passcode because the screen is black.
Try rebooting it (hold home and power together for 15-20 seconds). If the display doesn't come back to life, you're out of luck. You're supposed to back it up before it fails. It's too late to do so after the fact.
-
my iphone 4's screen has gone black, like it would if i had turned it off except i have'nt turned it off and i cant turn it on or anything. can anyone help?
Try a reset. Hold down the Sleep/Wake button + Home button for around 10 seconds until the Apple logo appears.
Let me know if this helps.
- Greg -
We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on. Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer. help pls
FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.
-
My Iphone 4 has a black screen it still works I just cant see who Is calling or texting how can I fix this ?
You can actually fix this by posting this in the iPhone forum and NOT an iWeb forum which is for building websites.
Check which forum you are posting in before doing so. -
Ihave downloaded a tv show and when I try to play on my ipad it skipped and then screen has gone black. What should I do?
If the Videos app is now 'frozen then try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app completely : from the home screen (i.e.not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
iphone 4 has a black scrren which will display the apple logo and appears to be at start up but then blacks out for approx 10 seconds and then displays apple logo again. Same action over and over.
I have attempted hard reset but cannot complete. Also attempted to connect with itunes and it does not recongize device.
Device is frozen in this display loop. Have an appointment with genius bar tomorrow but it's a 2.5 hour round trip so suggestion appreciated.Your device may need to be restored as new in iTunes (instead of restored from a back up as it seems that there is a software issue on your phone).
If your phone is not able to connect in iTunes try forcing recovery mode (http://support.apple.com/kb/HT1808)
* power off your phone.
* Hold the home button while connecting your phone to iTunes. You should see the connect to iTunes window and your computer should give you the recover mode alert.
*Restore your device as new. Being sure not to restore from a previous back up.
You will then want to sync your information back to your device from Outlook, iCloud, Google or wherever your information is stored. -
My Iphone 4s has a black screen. If I hold down the ON button, it will occasionally flicker and then go black again.
Is it dead? Is there any way to fix it? It's sitting in a bag of rice right now, a desperate measure.Are you saying it got water damage? If not what mende1 suggested, or the following
http://support.apple.com/kb/TS3281
is the way to proceed. If it got wet all bets are off.
Maybe you are looking for
-
Map coordinate to screen coordinate algorithm
I am working on a simple 2d RPG, but I ran into a problem while working in NPCs. Currently the player is fixed at the center of a panel and the map scrolls below him. The panel the character and map are drawn on is only 1000 by 520 pixels and the map
-
Dear Gurus, In a process order when i click on cost analysis i do not see target cost.the target cost column is empty . Actual cost column is ok and there are values it and same is with Target/actual variances column. What is the reason the target co
-
How to get the RFC destination from logical system
Dear all , i am working on one system and want to fetch data from another R3 sys i have written call ' FM' dest 'HPCR3' where HPCR3 is hardcoded. now if i want to remove the hardcoding i need to find out the RFC dest ( HPCR3) form logical sy
-
The RAW Fine tuning options are not showing up in my adjustments hud. I have Aperture 1.5.6. I can't find a way to add this to my adjustments hud. How can I add this?
-
My Ipad will no longer let me add appointments. I type them in, select 'done' but nothing appears. Help!