My iphone 4 has got the apple logo on the screen but nothing else happens, can not reboot using on/off- home keys, error in trying to reboot from itunes, please help
can not switch my phone back on, yhe apple logo shows but the phone wont do anything, unknown error when trying to reboot from itunes
Does your device have a full charge? Often if you give it a full charge, that will fix the problem
If that doesn't work, plug it into itunes and run any updates that may be available.
Let me know if we are still broken after this.
Similar Messages
-
I have the apple logo on my phone but nothing else works
I have the apple logo on my phone but nothing else works, how do I turn the phone back on?
Try resetting your iPhone. Hold the on/off and home buttons together for 6 or 7 seconds till the Apple logo appears.
-
TS3274 Apple logo appears on iPad, but nothing else happens.
Earlier today, I downloaded some updated apps - about 13. I deleted a newspaper app, then did a sync. Since then, all I get on my iPad is the Apple logo. It isn't recognized in iTunes, and there is apparently no recognition of the iPad when I connect the USB to my computer. I'm running Windows7 Enterprise, and have had no problems in the nearly 3 years I've owned the tablet.
Start with this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't help, and the device is still showing the Apple Logo only and is not being recognized in iTunes, read this about restoring via recovery mode.
http://support.apple.com/kb/ht4097 -
i have an 6 year old mac mini with issues that started two weeks ago. I can turn it on , get blue screen and turning circle and nothing else......help !
Hi,
Have you tried some of these? http://support.apple.com/kb/ht1533
The first things I would try would be to press shift during start up, this will boot into safe mode.
I think you'll need to purchase a copy of Snow Leopard to re-install the OS.
There's another couple of suggestions here; http://support.apple.com/kb/TS1417 where you can boot into single user mode and look at repairing disk permissions if that's the problem.
I would hope that if you could boot into safe mode or single user mode, then that may automatically rectify your current issue. If not, then I'm pretty certain that a fresh install will be the ultimate answer. -
I was updating to ios7 and my iPad froze. I tried the restart sequence but nothing.
Keep us updated with what happens after letting the battery fully drain.
If it still remains stuck at the Apple logo, try manually placing and connecting the device to iTunes in disk mode.
Putting iPod into Disk Mode
B-rock -
What should I do? I need to update the newest version of itunes to run the new iPhone 4 update. Thanks for any help!
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I cannot open itunes on my mac. The Icon jumps, but nothing else happens.
I may have shut my computer off while a new version of Itunes was downloading. Not sure if this would affect it, but I can't open it now. When I click on the icon, it jumps a little, but nothing else happens! Any ideas?? Help! I can still open it on my iphone.
Boot from your Snow Leopard install DVD, run Disk Utility and run Disk First Aid.
Reboot.
Then Apple menu > Software Update.
Then reinstall iTunes. -
Hi
i have a Mac book little bit old .and I use LR5
when i want to use the defat correction tool , i open the tool , i choose "correction" and then i clic on the defaut
a second circle appears but nothing else happens . No correction
do i miss something???
ThanxIt's sounds like you're using the Spot Removal tool. What happens depends on the Feather and Opacity controls. If the Opacity is at 0, you won't see any change. 100 will give the full healing or cloning, while feather controls the size of the edge of the healing.
-
My iPhone 4S got stuck on the apple logo with the progress bar!
Afternoon. My iPhone 4S got stuck on the apple logo with the progress bar! but every time after I restore the 4S the progress bar starts again and stops at different stages of the loading process! Can anyone help with this please?
All this started happening after I tried to download the lastest update (iOS 7.1). The 4S went and got stuck on the apple logo and progress bar!!Hello kuukua.b,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care,
Alex H. -
Hi
I've just reset my iPhone 4s as I was planning to sell it on. After the normal stuff you see on a reset I've been left with a phone that just has the apple logo on the black screen and it appears to be frozen and wont do anything?? any ideas?
I've tried holding down top button and round button which makes it go off but as soon as you push top button again it comes back and again its frozen.
Thanks for any ideas in advance?You need to put your iPhone into recovery mode to restore it: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?
Hello kuukua.b,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care,
Alex H. -
I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx
This might help: http://support.apple.com/kb/HT1495.
-
I am trying to upgrade my macbook pro to os x mavericks, but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?
Hi there Candyleehoiman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W. -
My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?
I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.
-
Iphone jammed with the apple logo on the screen
hi i need help my iphone 3gs is jammed with the apple logo on the screen.
i was in the middle on sync wit my laptop to update v4.2 wen my usb cable was accidentally disconnect frm the port and nw my iphone is jammed wit the apple loga appeared on the screen.. i tried pressing all the button that is available like the home button the on,off button but to no respond frm my iphone.. plz in need of help real badly....Hey
I had the same thing that my iphone 3gs jammed with the loge on the screen. None of the buttons responded. I just waited till the battery was empty. But the battery wasn't laoding. I waited 48h while my iphone was plugged in. After the 48 hours he just started. The battery was still empty but it started loading.
Hope yours will work again also
bye
Maybe you are looking for
-
Error while configuring second instance of OIF
Hi, i am installing OIF in dev environment in clusterred mode. I was able to create one instance successfully, but whille creating second i am getting error. The parameters of im_config_only.rsp are as below: [ENGINE] #DO NOT CHANGE THIS. Response Fi
-
Retrieving Automate Batch processes I created in Photoshop CC before updating to Photoshop CC 2014
I used Photoshop CC this afternoon and created a couple of batch processes. This evening I had to update CC and the result was that when I opened Photoshop CC 2014 the two batch processes I created were not there. Is there a way to import them and fr
-
Hi, Will anybody give me an idea how to get the refund og excise duty while doing MIGO ??? What are the steps the user should do ???? Explain me the configuration steps also ????? Regards, N. Somasundaram
-
Hi ! Work flow Experts! I am triggering work flow from crm to ECC vise versa,I am unable to get Initiator User name it shows only CRM user name (RFC USER). I want to get ECC server User names in CRM. I am running an remote function module from ECC
-
Definition of Reference Data in complex Fox Formulas
Hello IP Experts / Gurus / Developers, As far as I know there is no real concept behind the determination of Reference Data in Integrated Planning, when you do run functions from a sequence and not directly on a Dataprovider (where you have the possi