My iphone 4 ios 7.0.2 wont detect 3g even after i restored it to factory settings.its a software issue Pls help . I tried using another phone ang 3g works though
Pls help...my phone just stopped detecting 3g, i called my provider and said that its a software issue. I did try restoring it to factory settings but no luck. Anybody can help me pls.. I would gladly appreciate it :(
Hi and i appreciate your help. Its been updated to 7.0.4 now but still no luck here :(
Similar Messages
-
I have lost all my contact details on my iphone 4s and I cant get them back even after hitting restore button.
This might be because that your game update or other software automatic update killed your contacts. You should make a frequency and regular backup for your iPhone so that all the data could be renewed to your backup data. Whenever you lost iPhone data, you have a choice to restore from iTunes. That is easy and free.
However, this is not the end of the world if you don't have any backup of your iPhone contacts, you can recover contacts with iPhone data recovery software, but that need you to pay for it. So making a backup is a good habit. Do you know how to use iPhone data recovery software to recover iPhone contacts without backup? If not, you can search in YouTube to get step-by-step guide to recover iPhone contacts from iPhone without backup. This is such an example: How to Recover iPhone Contacts - Step-by-step Guide. -
I recently had to send my iphone off for repair and when I have got it back it has been reset to factory settings. Can I get my phonos,music etc back through icoulds ?
If your backup is incomplete you won't be able to use it. Do you have any backups on your computer? (You can check by opening iTunes and going to iTunes>Preferences>Devices (Edit>Preferences>Devices on a PC). That will list any available backups on your computer.
-
Help Please, I sold my iphone 4 to my neighbor after I restored it to factory settings. I just bought a new iphone 5 and decided to check out the icloud "stuff' so that I can use 'find my iphone' because I have 2 kids. I went to check out my icloud on my imac and in the address bar put icloud.com then signed in, double clicked on mail went accounts then clicked on the gear in the right hand corner and there it was. My neighbor had his email in the icloud and there absolutely was no way to delete his info off of my new phone. I guess once the first person enters their info you absolutely cant get rid of it. you can get rid of aliases but just not the original one. WHY!! Is there any brilliant, wonderful,generous person out there that would know how to delete him from my account. The genius bar said that they've never seen this before. If someone can help I'm taking the info to the apple stores that I went to so that I can teach them how to do it. Of course, I will tell them who showed me. I give you my word.
As far as I know you can't delete the primary email address for an iCloud account. It's assigned when the account is created. But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password. Are you sure the account wasn't still on your phone when you gave it to him?
You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't. Make an appointment with the genius bar at a nearby Apple store and have them take a look at it. If necessary, they should be able to contact iCloud support for you. -
My iphone 4 button doesn't work. How can I use my phone without that working button?
my iphone 4 button doesn't work. How can i use my iphone without the working button?
Well if you restore your iPad that might work. If its a software issue, it might solve it. If that doesn't work, it might be a hardware issue that apple can fix.
-
can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3
Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.
-
i was updating my iphone ios suddenly battery was drain and itunes logo appears, how can i recover my file back? does anyone can help me...
Was your phone jailbroken?
-
Hi, can someone help please?
Itunes wont recognise my iphone, I went to connect to update the software of my iphone and it's not recognising my iphone now an errror meesage appears stating that it does not recognise my iphone?
I really dont want to restore back to factory settings and loose all my info!Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
iphone ios 7 not allowing pics to be scaled for wallpaper. Pls help, have tried switching off Paralax.
Thank you for such a quick response. Most of the things brought out in the article I had already done, but there were some others that I would not have thought of. Thank you again for directing me to this site. I will have to see now if this will increase the battery life any.
MaggieIB -
The problem is that my iphone isnt connected/synced to iTunes and i've forgotten my password so iTunes isnt connected either so can someone pls help me?
PLEASE HELP MEHi Someonewashere,
In the article you were coming from, there is actually a section regarding what to do if you have never synced to iTunes before:
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Regards,
- Brenden -
CAN ANY ONE HELP ME!!!
I lost my Iphone 5S in the morning, now it seems to be switch off and on the icloud too says offline
i fear the thief would have restored it to factory settings
is thr any means i can trace my phone
if he inserts a new sim into it can it be traced???
or can i blocked it by any means....lostiphone5s wrote:
i fear the thief would have restored it to factory settings
Not possible in iOS 7
The Apple ID and Password that was Originally used to Activate the iDevice is required
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
Lost or Stolen iOS device > http://support.apple.com/kb/HT5668 -
I have an iphone 3g that has been wiped. I want to restore back to factory settings. How do I do This?
scififreakster wrote:
When i plug it into the computer, Windows opens and says Found new hardware. Apple device in recovery mode. Then asks if i want to install software that it doesnt have. iTunes doesnt open at all. If I open iTunes, it still doesnt show up anywhere.
Windows can not identify that an iOS device is in recovery mode. Only iTunes can identify that.
What is the EXACT error message you're getting? -
I use a macbook pro..My iPhone 4s refuses to be recognised by itunes even after I downloaded the updated itunes...what now?
Hi Oneness1,
Thanks for visiting Apple Support Communities.
These troubleshooting steps can help if your iPhone 4S is not recognized by your MacBook Pro:
Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.
Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
If you are using an accessory, remove the accessory and connect the device to the computer using only the Apple 30-pin to USB Cable or Lightning to USB Cable.
If you have access to additional Apple 30-pin to USB Cable or Lightning to USB Cables, try testing with another if the first one doesn't work.
Restart your computer and device. To restart your device:
Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
From:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Restart your Mac.
From:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
All the best,
Jeremy -
Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the internet. But I still get the error: "itunes could not contact the iphone software update server because you are not connected to the internet." I also connected via iTunes and authorized the computer, but still have the same issue. Really, all I need to do is completely wipe the phone and start from scratch for safety's sake.
Help?Did you check your security software settings?
Third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software. -
The iPhone "iPhone" could not be restored. An unknown error occurred (1015)......How do I resolve this issue to be able to use my phone? Rather its restored back to 4.3.3 froom 4.3.5...I just want to be able to use my phone!
mazunzo tembo wrote:
"the iphone could not be restored, an unknown error occured(1015).
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Maybe you are looking for
-
Computer Restart itself during intalling Adobe CS3
Hi I trying to install Adobe Dreamweaver CS3 but my computer is restart itself. Its happen after setup initialization and during setup booting process. Its same also happen when i installing Adobe Photoshop CS3. FYI, i am using P41.7, 512MB RAM, 80GB
-
All of a sudden I'm getting jerky playback of video. I've tried the usual fixes: trash preferences, delete render files, repair permissions, repair disk, but nothing has helped. This happens in timeline and also with individual clips in the viewer, o
-
Recieving same texts on multiple phones
Recently I purchased an iPhone 5 and when I send text messages, some of them go to my Mother's iTouch. I did setup my Mother's iTouch under my same apple account, so my guess is that it has something to do with the same apple id. Any thoughts on wh
-
Modify Item details while submitting an order
Hi Experts, While submitting an order I need to modify one of the field in the item table when saving. So i am writing the code in the BADI ORDER_SAVE, method CHANGE_BEFORE_UPDATE . I have got the item details with me now in the BADI. How can i mod
-
Can a JOIN be used here instead of a UNION?
Hi Everyone, I am in the midst of writing a report which shows the 'Total Sales', 'Gross Profit', and 'Gross Profit %' by Sales Person. Traditionally I have used a UNION between two result sets to achieve this task. However I am wondering it if is po