My iPhone 4 is going auto off and auto on. Could you please help on this please
my iPhone 4 is going auto off and auto on. Could you please help on this please
iOS 8.1.3 is the latest version. There's nothing to download.
Similar Messages
-
Iphone 6 randomly shut off and will not turn back on - help!
I bought my IPhone 6 last fall from T-Mobile. My iPhone 6 was working just fine about an hour ago. Went to hit the home button to check the time and it would not turn on. It appears to have randomly shut off and now it will not turn back on. Tried holding the power button - nothing... same with the home button. Assuming I need to take it in for service, but I'm not sure if there is some easy fix for this.
Good Afternoon, robmarshall6,
If your iPhone will not turn on, try the steps in the article below to address the issue:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Take care,
- Judy -
Hi guys, I do need your help to answer this question please. I wonder that which industry and sector does Apple belong to? I have read some news on the Internet but there haven't provided with specific source. So could you help me to answer this question please? Thank you very much <3
Welcome to the Support Communities. Apple Inc. (AAPL) is listed on the NASDAQ exchange where it is categorized as follows:
Industry: Technology
Subsector: Computer Manufacturing
(Source)
More info from Apple can be found here:
http://investor.apple.com -
My iPhone 4 is turned off and keeps vibrating
my iPhone 4 is turned off and keeps vibrating
hi,
request you to hold the power button and home key simultaneously for few seconds. Then mobile will be restarted.
i also faced similar issue. Later it got restarted and started working normally.
Hope this helps?
Cheers,
Pradeep -
Would a 347 MB file be slow? Auto save and auto type turn off?
I am doing an art inventory and add jpegs of the art. I don't resize them they range from 750k to 3MB. I guess if it is slowing the program down i should? It currently is 267 rows by about 18 columns.
Thanks in advance.
Oh can I turn off auto save and auto type? That may help. How do I do that?Done.
Enter Scrip Editor
paste the posted script
File > Save > as Script on the Desktop
Move the script to the folder :
Macintosh HD:Library:Scripts:Folder Action Scripts:
CAUTION, you will be asked to enter your pasword.
Create a folder to do the job. I named mine Normalized. I created mine on the Desktop where it's easy to reach.
Go to :
Macintosh HD:Library:Scripts:Folder Actions:
Double click the alias : Configure Folder Actions
Below the left column, click
navigate to select your new folder
Below the right column, click
select the script image - normalize400.scpt
After that, drag and drop a picture file onto your folder.
The original will be move in the folder Originals (isn’t it original ?)
and a reduced copy 400 x height will be stored in the folder Normalized images.
And now, here is the script :
--{code}
Image - Normalize
This Folder Action handler is triggered whenever items are added to the attached folder.
The script rotates the image counter-clockwise (left).
Copyright © 2002–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
modified by Yvan KOENIG (VALLAURIS, France)
2011/12/08
This version normalize pictures so that
(1) the greater dimension become the width one (rotate left if needed)
(2) this greater dimension is ruled by the property maxWidth defined below.
property maxWidth : 400
-- set it to fit your needs
property done_foldername : "Normalized Images"
property originals_foldername : "Original Images"
property newimage_extension : "jpg"
-- the list of file types which will be processed
-- eg: {"PICT", "JPEG", "TIFF", "GIFf"}
property type_list : {"TIFF", "GIFf", "PNGf", "PICT", "JPEG"}
-- since file types are optional in Mac OS X,
-- check the name extension if there is no file type
-- NOTE: do not use periods (.) with the items in the name extensions list
-- eg: {"txt", "text", "jpg", "jpeg"}, NOT: {".txt", ".text", ".jpg", ".jpeg"}
property extension_list : {"tif", "tiff", "gif", "png", "pict", "pct", "jpeg", "jpg"}
on adding folder items to this_folder after receiving these_items
tell application "Finder"
if not (exists folder done_foldername of this_folder) then
make new folder at this_folder with properties {name:done_foldername}
end if
set the results_folder to (folder done_foldername of this_folder) as alias
if not (exists folder originals_foldername of this_folder) then
make new folder at this_folder with properties {name:originals_foldername}
set current view of container window of this_folder to list view
end if
set the originals_folder to folder originals_foldername of this_folder
end tell
try
repeat with i from 1 to number of items in these_items
set this_item to item i of these_items
set the item_info to the info for this_item
if (alias of the item_info is false and the file type of the item_info is in the type_list) or (the name extension of the item_info is in the extension_list) then
tell application "Finder"
--set name of this_item to "YK#" & (text -4 thru -1 of ("0000" & i))
my resolve_conflicts(this_item, originals_folder, "")
set the new_name to my resolve_conflicts(this_item, results_folder, newimage_extension)
set the source_file to (move this_item to the originals_folder with replacing) as alias
end tell
process_item(source_file, new_name, results_folder)
end if
end repeat
on error error_message number error_number
if the error_number is not -128 then
tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
end tell
end if
end try
end adding folder items to
on resolve_conflicts(this_item, target_folder, new_extension)
tell application "Finder"
set the file_name to the name of this_item
set file_extension to the name extension of this_item
if the file_extension is "" then
set the trimmed_name to the file_name
else
set the trimmed_name to text 1 thru -((length of file_extension) + 2) of the file_name
end if
if the new_extension is "" then
set target_name to file_name
set target_extension to file_extension
else
set target_extension to new_extension
set target_name to (the trimmed_name & "." & target_extension) as string
end if
if (exists document file target_name of target_folder) then
set the name_increment to 1
repeat
set the new_name to (the trimmed_name & "." & (name_increment as string) & "." & target_extension) as string
if not (exists document file new_name of the target_folder) then
-- rename to conflicting file
set the name of document file target_name of the target_folder to the new_name
exit repeat
else
set the name_increment to the name_increment + 1
end if
end repeat
end if
end tell
return the target_name
end resolve_conflicts
-- this sub-routine processes files
on process_item(source_file, new_name, results_folder)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
try
-- the target path is the destination folder and the new file name
set the target_path to ((results_folder as string) & new_name) as string
with timeout of 900 seconds
tell application "Image Events"
launch -- always use with Folder Actions
set this_image to open file (source_file as string)
set {oldW, oldH} to dimensions of this_image
if oldH > oldW then
set {oldW, oldH} to {oldH, oldW}
rotate this_image to angle 270.0
end if
set |échelle| to maxWidth / oldW
if |échelle| < 1 then scale this_image by factor |échelle|
save this_image as JPEG in file target_path with icon
close this_image
end tell
end timeout
on error error_message
tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
end tell
end try
end process_item
--{code}
Yvan KOENIG (VALLAURIS, France) jeudi 8 décembre 2011 21:25:33
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
my iphone 4s just shut off and when i charge it the apple appears but it goes back to black screen...help please?
Hi Haleynichole_99!
I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.
Hello Ritugor,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Am experiencing auto off and on on my BB curve 9360 whenever am listening to music or chatting with the phone. Anyone with useful solution should pls come to my aid, need it done asap. Thanks
Hello
Welcome to the Community
May we know your device OS version and if you recently upgraded your device OS?
Thanks,
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter -
Auto keyframe and auto transition not working
auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....
In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?. -
My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!
& it keeps trying to turn on but it wont . like the apple logo pops up for a minute , then turns off.Had exact same problem. Rang Apple support and various apple repairers. All of them said in effect, too bad, you'll have to lose everything since your last backup. It's a work phone with very important stuff on it and the latest backup was on a computer that had a virus. Convergence of crap :/
Happened to talk to a friend who said to try replacing the battery. Did that. Problem fixed. All data saved.
To all Apple support people: rather than say 'once it's in recovery mode you lose all data' try saying 'replace your battery and see if that works first'!!!! -
How can I continuously auto-save and auto-name the JPEG files with a controlled time interval
Hi,
I am newly involved in some Labview projects that out of my knowledge. I am trying to save multiple JPEG images from a live imaging task to a folder in the computer hard disk every certain minutes. I'd like to name these files with the date and time (eg. Img_06012011_1635. jpg).Then, after hours long image capturing, I can have all the image files in a neat order.
My goal is to have the jpg files auto saved and auto-named with the data and time at that moment. I also need to control this waiting time between each savings.
Could you please show me some hints about this? See the vi attached, I know I need to do something on the "write path" part on the up right corner. Thanks!
Solved!
Go to Solution.
Attachments:
capture.vi 28 KBThanks, Steve. When I built up a path with the date and time info and send them to the WriteJPEG File.vi like you mentioned, it stopped saving any files into the folder. Do you think this is the problem from my while loop?Could you show me if there is any other secret functions that restrains the file saving?
I am planning to save the image files every 30 secs,for example, and then I can have a bunch of jpg files with their unique names after hours long image acquisition.
I appreciate you kindly help!
Attachments:
capture(updated).vi 29 KB -
My iPhone had just gone off and can't get it on again
My iPhone had just gone off and want to get it back. It seems my account had been disconnected and don't know how to help this problem out.
try this. hold down the home/power button together unitl you see the apple logo and then release. Then wait for your phone to boot back up.
-
My Iphone 4 is turned off and will not turn anymore.
my Iphone 4 is turned off and will not turn anymore. I bought it 20 days ago. What should I do?
thank you very much.I was in panic! ^__^
-
My iphone 4 just turns off and on, my iphone 4 just turns off and on
my iphone 4 just turns off and on, my iphone 4 just turns off and on
Start with this --> http://support.apple.com/kb/HT3702
Next Restore the phone using itunes and set up as a new phone --> http://support.apple.com/kb/HT1808
If the problem persists you have a hardware problem.
All of this assumes your phone is not hacked or jailbroken. If it is all bets are off. -
My iPhone 4s turned itself off and won't turn back on. What do I do?
My iPhone 4s turned itself off and won't turn back on. What do I do?
Thanks for your help. I tried plugging it in but nothing happened, I actually still had battery power left. I was able to solve my problem by holding down the power and home buttons, which reset the phone and got it started again.
Thanks for trying
Maybe you are looking for
-
Maximum number of processes exceeded 150
Dear All, I have modified my init file and set the processes to 300 but I still keep on getting the above error. When I issue the statment : Select * from v$parameter where name='processes' I get the value 300. Why does the system message show 150 ?
-
N95 8GB Mass Memory in use error
Hiya I have a N95 8GB and when I try to connect it to my PC I get the error message that the mass memory is in use by another application. I have stopped all running applications. (there where none) Done a factory soft reset. No difference. Still can
-
Hi all, I need to check some business partner fields in transaction bp (telephone number or identification number, for example). Does anybody know if there is a BADI or a FM to do these validations? Thanks in advance
-
What are QTKitServer and osascript and why do they cause errors?
Hi- I'm running 10.6.8 on an iMac. I get this all day long when I use safari: 11/8/12 9:32:23 AM QTKitServer[415] Error loading /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType: dlopen(/Library/QuickTime/LiveType.component/Contents/MacO
-
After upgrading to Yosemite and or iPhoto 9.6 some of my picture albums have disappeared. The pictures are still on iPhoto, is there any way to get them back? I don't want to go through over 15,000 photos to make new albums.