My iphone 4 is not locating my new cannon airprint printer?

my I phone 4 cannot locate my new caanon airprint printer even though my Ipad can? what am i doing wrong?

Hello there nicgreg,
I think it might be a good idea to reset the network settings on the phone first, to get started. This will reset all wifi connections so you will have to rejoin your wireless network and put the password in when you join. You reset the network settings by going to Settings>General>Reset> Reset Network Settings. Then try again.
If the issue persists, then I recommend sections 1, 3, and 5 from our iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/.
Here is section 1 to get you started:
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
Regards,
Sterling

Similar Messages

  • My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

    My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

    In the Music tab of iTunes, do you have 'Include Voice Memos' checked?

  • HT1400 I purchased a new chip but my iPhone 4S will not recognize the new chip so what do I need to do?

    I purchased a new chip but my iPhone 4S will not recognize the new chip so what do I need to do?

    okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed.  Where do i find the backed up info from my phone?

  • I do not want any news to be printed i'm saving on ink. how do i cancel

    i do not want any news to be printed i'm saving on ink.  how do i cancel

    Hi,
    If you are referring to eprint please check the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03181888&lc=en&cc=us&destPage=document&dlc=en
    If other issue please provide more info about the issue.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer.  I reset all printers and now I cannot seem to add a printer by using the Add a printer function.  Ideas?

    My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer.  I reset all printers and now I cannot seem to add a printer by using the Add a printer function.  Ideas?

    The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
    Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

  • IPhone 5 will not sync with new iMac

    Whenever I plug my iPhone 5 into my new iMac, I get a message that reads, "iTunes could not connect to this iPhone.  Could not allocate a resource".  What's the deal?

    Try resetting the Lockdown folder as described in itume #7 in this article: http://support.apple.com/kb/ts2529.

  • I can not locate other new vehicles with Firefox on GM Dealerworld but I can on Explorer

    I am not able to locate other new vehicles with Firefox on GM dealerworld but I am able to with Explorer
    == URL of affected sites ==
    http://gmdealerconnect

    Your link did not work. Please post the correct link.

  • Iphone 3g will not see my new apple id so will not sync with cloud

    I changed my apple id because i no longer had access to the old email address - what a mess! I finally got the ipad to recognize the new id but the iphone automatically sees the old id and will not "take" the new one.  I went to the apple store and signed out of the old id and and into the new but it still sees the old id whenever I try to back up to the cloud
    Please help me I am losing my mind.

    Disregard - someone much smarter than I showed me to delete the account and then replace it wiht the new one.  Thanks to him I'm all set

  • IPhone 4 will not update with new software

    I can't get my iPhone 4 to update with the new software.  I keep getting an error message that says there is a promblem downloading the software and the network connection timed out.  Make sure the network settings are correct and your network connection is active.  I reset my network connection, which did nothing to help.  What next?

    try to restore....its the same as update.....i did that and worked prefect........make sure to back up all your files!!!!

  • My iPad is not locating my brothers MFC-J835DW printer

    My I pad can  not locate my MFC-J835DW printer

    Make sure your printer has updated firmware and is connected to the same network as the iPad.
    http://support.apple.com/kb/HT4356

  • IPhone 4s is not recognized by new 2012 Honda civic, any sugg?

    Does anyone have a problem sinc iPhone 4s with new Honda civic

    On my insight I had to do the following
    1 Switch off the car radio at the radio power switch
    2 turn off the car
    3 power off the iphone (not sleep!)
    4 connect the iPhone to the car
    5 Power up the car
    6 switch on the radio
    At this point the iPhone should power up. part of the power up it will re-negotiate with the radio and it should now work normally.
    Hope this helps.

  • Iphone 4 will not download the new ios update  ?

    I deleted every app (including numerous apps iI had to pay for) on my iphone4 because the update could not be completed due to a storage shortage.  Now I paid $20 to get more storage and I find out after the fact that the additional storage i got was for icloud storage and update still cannot be completed.  Some one please tell me what to do before i fling this phone through the nearest window.  I have been trying to do this update for over a week now

    Actually there is a way to update the phone without worrying about the size. See, when you buy an iPhone, say 16GB, you're only actually getting about 13GB of usable storage, because the operating system takes up about 3-4GB all by itself. So when you are trying to update, the phone is trying to add that 3-4GB to the phone in addition to the one that's already there, and then switch them around and delete the old one. The way around this is to do a restore. If you plug the phone into iTunes, make a backup, and then restore to factory settings, it will accomplish the same goal without having to worry about the space constraints. The reason is because the factory reset will take everything off the phone, then put the update on, and then allow you to restore your backup to the phone once the new software is there.

  • IPhone 3 can not connect to new nets

    Hi, I have an iPhone 3 and it has the problem that whenever I want to connect to a new wifi point access I introduce the correct password and the device says "It is not possible to connect to "NETNAME"" though my iPhone is near to the point access router, it is so near that I even put the device next to the router. This problem didn't happen before, I was able to connect for example to my university's wifi or office's wifi. They changed their nets, so I had to connect again for the first time and then it would be automatic to connect, but I can not connect for that first time, although the net is similar to the mentioned before. What can be the problem? PD: I can connect to my house wifi's but my device has to be really near to the router, its signal caption is really poor.

    IPhone 3 G can only connect to Wi-Fi 802.11 b/g.
    Maybe because of that since you have no problem connecting to your home wi-fi.

  • Help! - iPhone 2g will not activate with new sim card

    I have been given an iPhone 2g for my son. Have activated a new sim card as 02 said this was the reason I could not activate on iTunes. Still cannot get the phone activated. I have reset all settings so am now lost as to what to do next!

    I have tried that but the phone is not being recognised when I connect it to iTunes. I keep getting a message on the phone saying "new sim detected - please connect to iTunes". When I connect to iTunes I get the message "unable to activate - please try later - disconnect the phone" - very, very, frustrating. Didn't have any problems at all when my older son took over my iPhone 3G and put a 3 sim in it (after being unlocked).

  • IPhone 4S WILL NOT load my new music!

    ever since i upgraded to ios6, my iphone wont go past step 7 when i try to sync my new music,it says "determining tracks to sync" and then it will say "iphone can not complete sync because iphone has been disconnected" but its still plugged in and still registering in itunes! I have tried restoring my iphone, after about 20 minutes it will say that my phone has been disconnected (ive tried switching usb cords thinking there was a broken wire in the cord or something) so i cant even restore my phone to see if that fixes it... ive googled answers for this issue and tried everything everyone has said and i STILL cant load my music! it will show up in my library but it will be in grey lettering... CAN SOMEONE PLEASE HELP ME!! i have owned every iphone since they first came out and never had an issue like this

    also - i have tried deleting itunes and loading it again, retstarting my computer and my iphone, and still nothing... and if i leave my phone to try and get past step 7 (for example it was trying to sync while i posted this thread) if i go to click on itunes again it wont open itunes

Maybe you are looking for

  • How to load my pictures as screen savers

    please forgive my ignorance but I totally do not understand what this cloud or iCloud is but i understand one must use it t o load one's own pictures onto Apple TV to use as screen savers.

  • Help I,m a dad trying to sort out my daughters ipod shuffle

    Just bought new ipod shuffle on web, was working fine but now it seems to be frozen. I have tried all the suggestions on the web site and still the stupid little thing won't work. When I turn it on a green light stays on for about 3 seconds then flic

  • Web dynpro with adobe interactive forms and button submit

    Hi, I'am new with webdynpro and adobe interactive forms so i just trying some example with an adobe interactive form with a submit button event handler inside the webdynpro. But i can't catch the event handler submit that i creaate on onSubmit proper

  • IPAD2 FROM US CAN WORK IN GREECE?

    Can an IPAD from US work in Greece with local networks?

  • I updated sys.props$ database will not open

    In an attemp to modify the Character set I updated the sys.props$ table to a new character set. Until the database was shutdown everythig was fine. Now when I startup I get the following message: ORA-01092: ORACLE instance terminated. Disconnection f