My iphone 4 is not switching on even when connected to pc
Hi i just dont know what happened my iphone 4 is fully charged but it suddenly switched off and was mot respomnding even when connected to pc.
kindly give me a suggestion...................
no it says an error has occured when syncing iphone, but there is an improvement now with sync cable and itunes symbol
Similar Messages
-
HT1688 My iPhone 4 will not turn on even when connected to a charger?
My iphone 4 is dead. Will not turn on even when connected to a charger. Have tried simultaneously pressing the wake/home buttons to no avail.
Hello fredswolf,
Thanks for the follow up and additional information. Based on the information you have provided, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/iphone/service/faq/
Thanks,
Matt M. -
Urgent- Zen X-Fi not switching on even when plugged in
I left my Zen X-fi in the glove box of my car for two nights and when I retrieved it today it will not switch on, even when plugged into the computer via USB or through my mains adaptor . I have tried using the reset button and tried to recovery it using recovery mode, but that is not working. I am going on holiday in two days and I need it fixed urgently. Any help please?
**** it! After ordering a new battery at my own expense and nearly two hours carefully disassembling the device and soldering a new battery on, my worst fears were confirmed because the device still isn't working. It looks like the player has well and truly died and there appears to be nothing more I can do to fix it.
Looks like I will have to fork out for a new device. Any suggestions on what model I should go for? -
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
Check to make sure you have enough free space to include the videos.
-
my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help
Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPhone 4 will not power on. When connected to iTunes via my computer, it is recognized and shows fully charged battery. Pressing and holding the sleep/wake button does nothing; just a black screen. Any suggestions?
Only way is to bring it to the Apple Store and use the warranty if it hasn't expired
-
Mac Pro FireWire does not switch off even when Mac Pro is switched off
Hi,
got my new Mac Pro with 2 x 2.8 GHz Quad-Core Intel Xeon last week!
Found out today, that the firewire connection both on the frontside as well on the backside
keeps beeing powered even if the Mac Pro is switched off!
Is this a new features as my old Mac Pro (2x2.0 GHz Dual-Core Intel Xeon) did not have this feature?
If yes, why is this so? For what is it good for?
Thanks for your comments? If you have the same new Mac Pro maybe you can check out and let me know if this feature is also on your Mac Pro seen.
ThommyHi,
called to the apple hotline and got informed that the so called "residual current" is normal at the MAC Pro. Sometimes the USB Ports sometimes the FireWire Ports keep been powered continously even the machine is switched off.
Apple told me further that I can use a connection plug board with a central switch to solve my issue.
I will close now the subject! Thanks veryone for all your help here!
Thommy -
My iPhone 5 will not switch to landscape.
My iPhone 5 will not switch to landscape. when texting or using safari it will work during games or if I go to home screen turn phone sideways and double tap select messages then it will go to landscape. I have tried locking it then unlocking it. I have even tried doing a soft reboot an nothing seems to work? Any ideas of the problem an how to fix it?
Prime25 wrote:
How do I restore from backup using the cloud?
Only if you have done iCloud backup before you can use iCloude restore.
Backup / Restore overview:
http://support.apple.com/kb/HT4859
Restore from iCloud:
http://support.apple.com/kb/PH12521 -
IPod Won't Power Up, Even When Connected to Mac
I'm trying to figure out if there's any chance this could just be the battery, or a more catastrophic failure (harddrive, etc.). The iPod will not power up, even when connected to the Mac, and will not mount as a removable drive either.
I've been having trouble with the battery for some time now (it will only hold a charge for about an hour, two tops) but I would think that even if the battery failed outright it would still work when plugged in (either to the wall, or to the Mac).
Does anyone know for certain if that is the case? I'd hate to waste any money sending this off to ipodresq.com for a battery if it's something more serious. (And this one is so old, if it is a harddrive failure or anything like that I'd be better served to buy a new one.
G4 933 (Quicksilver) Mac OS X (10.4.4)Thanks for those links; I performed a hard reset and that seems to have brought the iPod back to life, at least for now. I suspect that the battery is no longer holding any significant charge and needs to be replaced, which might be why it locked up in the first place.
So now I get to decide if this 1st gen iPod is worth the money to replace the battery, or if I should just finally buy a new one. (I definitely do not want one of those rumored touchscreen models, though, if they turn out to be reality... impossible to navigate by touch alone while driving, and I have no use for video on an iPod - I want to watch video BIGGER, not smaller!)
Thanks again!
G4 933 (Quicksilver) Mac OS X (10.4.4) -
How do I sync my iPhone 5 to my new PC? iTunes will not recognize it even when plugged in the USB port. Settings>General>iTunes wifi sync is still my old laptop. Any help is appreciated.
See also Recover your iTunes library from your iPod or iOS device.
tt2 -
My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progress in the bar did not start yet after 5 hours. Some one please hep me.
I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.
-
My Ipod touch will not turn on even when hooked to my pc. When i open itunes it says it has detected an iphone in recovery mode And You must restore this iphone before using in itunes. When i click restore iphone a msg. comes up saying software for this iphone is not currently available. I have tried to a soft reset and a hard reset on the ipod nothing is working... PLEASE HELP!!!!
Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPhone 3 is not seen on iTunes when I connect it. It is also showing low battery but is not even charging and continously showing the Apple logo... What should I do? Thanks in advance, Jahnavi...
Jahnavi,
two things to be looked upon in this case. First thing is about the battery. Once the battery has enough charge in it we can try a force restore on the phone to re-install the iOS.
> Try a hard reset of the phone (Press and hold the HOME button and the Sleep/Wake button until the phone restarts and comes up with Apple logo). After trying this step, try charging the phone and see if the battery holds the charge.
> Once battery has enough charge in it then we can force it to DFO mode and perform restore. For restore refer to this link. -
my iphone 4 is not turning on even after long pressing home and sleep/awake button together (about 10-60 sec).
Crap. That's what I was afraid of...Well, since I'm away from home and not near my pc, it sounds like I'm out of luck. The problem is that I need my phone to be at least functional for making and receiving calls. There's an apple store nearby. Perhaps I can go there and have them restore it and at least I'll be able to make and receive calls until I get home and restore from my backup. Does that sound feasible, or am I missing something?
P.s. I tried to click "correct answer" and accidentally hit "helpful". Sorry about that... -
My iphone is not receiving emails even when I try to manually update. I sent myself an email at 8:43am and still haven'y received it on my iphone at 9:13am. Any suggestions?
delete your mail account and add again your own then try. if it doesnt work reset the phone and start as an new phone
Maybe you are looking for
-
What do you think is the best method to achieve this:
Within my main timeline, I have a bunch of buttons that scale up on mouseOver and scale down on MouseOut. With your help, I have gotten these all set up exactly how I need them to be.... so thanks for that. My next question is a bit trickier, I think
-
Problem with one AVCHD file using L&T
I just shot a project with a new Sony NX5 and recorded to both the FMU 128 hard drive and a 32 gig SDHC class 10 card. I have a total of 3hours and 20 minutes and about 75 clips. The clips are 1920x1080 60i, again it is AVCHD. I'm using L&T to transc
-
Hello there! Here is the problem. When I am giving a label the name which generates from some code I can't see it in design view. Only {bracketed} expressions appears, which can mess with design appearance (overlapping) so it's no longer comfortable
-
I am porting from Solaris 8 to Solaris 10 on a SunFire V240. I noticed that there are only 32 pts entries in the /devices/pseudo directory. As I will have more than 32 users logged in to this server, will Solaris 10 automatically add more as needed o
-
Goods receipt reveral of Asset Document
Hi All, I have one problem here would like to discuss. 1. Made the asset , here we put 5 % scrap value 2.Made the PO with account assignment A. 3. did the GRN see the first 101 material document .,the value of the GRN is 346,800.00 INR which is