My iPhone 4 is on but the screen is black and won't connect to iTunes. What do I do?

My iPhone 4 is in very good condition. But this morning i was on my phone and it froze. So i just put it down and waited for it to go back to normal. A few minutes later the screen went completely black. I though it just turned off so i pressed the home button but nothing happened. It was at about 80% battery so i knew it didn't die, but i tried plugging it in to see what would happen. My phone made the sound that it usually makes when I plug it into a charger but still the screen was blank. I tired to plug my phone into my mac to restart it in iTunes but it never connected. It only connected to iPhoto. I've tried holding down the lock and home button until the apple logo came on the screen but it never did. I don't know what to do. I know I should take it into the apple store but I want to try to get it to work at home instead of having to go all the way out there. Please if anyone has any suggestions that would be great!

If you have attempted the reset, which is holding the home button and sleep/wake button, was it still connected to the computer? Have you tried to do that when not connected. You stated it never came on, how long did you hold the buttons together? If you cannot get it to connect to iTunes then you would not be able to restore the device. You can see if you can put the device into Recovery Mode by following the instructions in this support document. If that does not work, then you are correct, make an appointment at the Apple Store. If you can't update or restore your iOS device

Similar Messages

  • When i try to download an free application, apple ask me for ID,i put id and pass,but the screen is black and nothing happens.. ?  what can i do?  thank you

    When i try to download an free application, apple ask me for ID,i put id and pass,but the screen is black and nothing happens.. ?  what can i do?  thank you

    Hi...
    When you post for help, please tell us which MacOS X you have installed.
    Install the appropriate combo update ...
    For v10.6 Snow Leopard > Mac OS X 10.6.8 Update Combo v1.1
    For v10.7 Lion >  OS X Lion Update 10.7.3 (Client Combo)
    Then restart your Mac. That will reinstall the App Store for you.
    See if you can download an app.

  • My iPhone 5s is on but the screen is black and the phone is detected by iTunes

    I had my iPhone 5s screen shattered so I replaced the digitizer and the phone worked fine but I ripped the rubber for the home button by mistake. So I opened the phone again to replace the adhesive home screen rubber and when I put my phone together again the screen would not work. I tried hooking up the older screen and it also does not work (so the problem isn't from the digitizer)
    However the phone is detected by iTunes and when I call it from another phone it shows that it is beeping but the phone does not ring (no sound) and I am unable to answer calls.
    I thought it may be a connection problem from the digitizer so I tried to connect it multiple times and at some point the lights came on the screen but no apple logo or anything and when I hooked the phone to the USB the phone was vibrating every 2 seconds.
    What might have caused this problem? Is it perhaps the backlight filter? even though I did not touch that part.
    P.S: Yes I tried to reset the phone and all the basic methods and nothing worked.

    HandsOfEnlil wrote:
    I had my iPhone 5s screen shattered so I replaced the digitizer and the phone worked fine but I ripped the rubber for the home button by mistake. So I opened the phone again to replace the adhesive home screen rubber and when I put my phone together again the screen would not work. I tried hooking up the older screen and it also does not work (so the problem isn't from the digitizer)
    However the phone is detected by iTunes and when I call it from another phone it shows that it is beeping but the phone does not ring (no sound) and I am unable to answer calls.
    I thought it may be a connection problem from the digitizer so I tried to connect it multiple times and at some point the lights came on the screen but no apple logo or anything and when I hooked the phone to the USB the phone was vibrating every 2 seconds.
    What might have caused this problem? Is it perhaps the backlight filter? even though I did not touch that part.
    P.S: Yes I tried to reset the phone and all the basic methods and nothing worked.
    You replacing the screen is the problem.
    You'll need to google ifixit to find your solution.

  • HT1212 my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone

    my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone?

    I have to believe this has something to do with iOS 7 issues. I have taken my screen blacked out 5s twice to the Genius Bar and the found a bunch of system apps had crashed.  So if this is the case, is iOS7 the problem?

  • My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls

    My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls
    i have tried manythings but it doesn't work
    i put it in silent mode and i found my calls comes normaly and it works good but when i turn on ring mode it's back as it how can i fix that ?!

    Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device.  Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

  • My iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?

    my iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?
    help me ASAP please

    Hello sameen shah,
    The following article would be a great place to start for information that can help get your iPhone working again.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • I accidentally dropped macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!

    I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
    I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
    Please help me..

    Accidental damage is not covered under Apple warranty.  And it seems there is much accidental damage.  Only a Genius Bar tech looking at it can tell how much it will cost to repair.
    Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
    There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs.

  • My 2yo MacBookPro comes on but the screen is black and blank. After about 30 seconds it powers down. Any ideas?

    my MacBookPro comes on but the screen atys black and blank. After about 30 seconds, it shuts down. Itx less than 2 years old and has very few hours of use.
    anyone one have any ideas?
    katherine

    If you have attempted the reset, which is holding the home button and sleep/wake button, was it still connected to the computer? Have you tried to do that when not connected. You stated it never came on, how long did you hold the buttons together? If you cannot get it to connect to iTunes then you would not be able to restore the device. You can see if you can put the device into Recovery Mode by following the instructions in this support document. If that does not work, then you are correct, make an appointment at the Apple Store. If you can't update or restore your iOS device

  • I start my I mac 21.5 inch led 16:9 widescreen computer but the screen is black, I hear it starting but the screen still black. and the screen is black, I hear it running but till the screen black

    I start my I mac 21.5 inch led 16:9 widescreen computer but the screen is black, I hear it starting but the screen still black. and the screen is black, I hear it running but till the screen black

    Try a safe boot.
         Shutdown your machine.  Hold down the shift key.  Poweron.  Wait awhile; wait awhile while you harddrive
         is being checked.
         http://support.apple.com/kb/ht1455
    Report back results.

  • This happened to me when I received a call. My phone started vibrating when it received the incoming call but the screen was black and kept vibrating like as if the call was still coming in.

    This happened to me when I received a call. My phone started vibrating when it received the incoming call but the screen was black and kept vibrating like as if the call was still coming in, even though my friend hung up. It kept going and going, so I tried holding down the lock button to turn it off but screen was still black/turned off. Hitting home did nothing. My friend said to try holding down the lock button and home button together to reset it. I tried this and yet nothing happened. I am waiting for the battery to drain out and give it a try.

    To reset, you have to press both the home and sleep/wake buttons until the Apple logo appears - takes 10-15 seconds.

  • I turn on my macpro and the screen is black. I get the My new MacBook pro chime when turning it on but the screen is black and stays that way ??????

    I turn on  my macbook pro retina display and the screen is black.
    I get the chime when turning it on but the screen is black and stays that way ??????
    macbook pro is new..28 days old...
    please help.

    Maybe:
    http://osxdaily.com/2014/11/22/fix-macbook-pro-booting-black-screen/
    You also have 90 days of free telephone support
    Complimentary Support (USA)
    BTW, this is the Mac Pro desktop forum

  • My ipad is disabled because my daughter changed the passcode and then she forget it and now we tried several times and the ipad is sdisabled and says to connect to itunes what do i do to undisable it?

    my ipad is disabled because my daughter changed the passcode and then she forget it and now we tried several times and the ipad is sdisabled and says to connect to itunes what do i do to undisable it?

    Try this first - I saw a recent post where a user with the same problem after an iOS update used his Apple ID password.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Iphone 4 was dropped in cold coffee.  I let it dry in rice for a week.  It turns on but the screen is black, and if you hold it at an angle  you can see the apple logo.  How do I fix this

    I let my phone dry out in rice for over a week.  I see it turn on but the screen is black.  If you hold it to a light you can see the Apple logo.  How can I fix this?

    It depends which country you are from below is US
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • I need to sync my iphone 4 to get access to contascts but the screen is shattered and wont let me swipe anything. what can i do?

    hi i need to sync my iphone 4 to regain contacts but the screen is absolutely smashed and i cant swipe it, and the last comp used to back it up is asking me to respond via the phone to unlock? theres no password just swipe but i cant use the screen, any ideas??

    Your contacts are not sync'd with a computer or at icloud.com?

  • I was using my iPhone 5 and the screen randomly went black. I can still hear incoming calls but the screen stays black and unresponsive and stays black. My lock button stopped working last week so I can't restart the phone. What can I do to solve this?

    I had an appointment this morning with Apple to try and solve the problem with my lock button ranomly not working anymore and a few hours before my appointment with the Apple store i was using my phone and my screen randomly went black and stopped working. And the p.roblem now i cant use it. I tried restarting the phone but I can't restart it due to my lock button not working so i need help with a solution on what i can do. I missed my appointment today because i could no longer use my phone and i'm now stuck using my laptop. I did also try connecting it to my MacBook but the screen was still unresponsive and black. I rescheduled my appointment to Monday to see what is wrong with my button and screen but in the meanwhile i would like to know if there is anything i can do or if i would just have to wait until monday and take it in to Apple. Any help would be really appreciated as i am phonelss for now until i take it in to Apple in a few days. Thanks.

    You wrote...
    ' What can I do to solve this'
    What have you tried...?
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...

Maybe you are looking for

  • How to use my dv camera on my mackbook(Late 2008)

    hi... my name is Thiago.. and i have an sony digital video camera that i used in my old mackbook with a firewire 6 pin cable.. but now i cant use my camera because there is no firewire 6 pin connector in the macbook(late 2008) my camera have a firewi

  • Internet Explorer freezes when accessing sites using Flash

    I am using Windows 7 64-bit, Internet Explorer 8 32-bit and Flash Player 10.1.r102.64. Also Norton Internet Security 2010. I am having multiple problems that seem to have arisen more or less simultaneously, I don't know if they're connected or even i

  • USB charging ipod classic (5th) without the power adapter

    I'm going to the Gambia, and purchased an extension chord that has a USB plug. The Electricity in The Gambia is 230 Volts, alternating at 50 cycles per second. If I travel to The Gambia with a device that does not accept 230 Volts at 50 Hertz, you wi

  • Nican backwards compatibility between nican versions 2.1.3 and 2.6

    Hello folks, I have inherited a VC++ application that uses nican.  It was apparently compiled using nican version 2.1.3 (assumed to be true because the VC++ program works with nican 2.1.3).  We recently installed LabVIEW 8.6 (including nican 2.6) and

  • Error in execution in RSA3

    Hi Experts, When executing a FM based extractor i got error 'Error in execution'. The log says 'Update mode not supported by API'. I checked in debugging mode the update mode not getting reflected from standard program whtever mode in RSA3. Please su