My iphone 4 is saying no service
My iphone is saying no service , I belive i have connect everthing to icloud. Should I be able to connect to icloud and all my details be there ?
If you mean that "no service" appears at the extreme upper left corner in place of signal strength bars and the name of your cellular provider, that means either (a) your phone cannot "see" any cell towers of the right type or (b) your phone has no active cellular carrier account (possibly because you or the carrier closed your account or took this phone off of it).
Similar Messages
-
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
On my iPhone 5s it says no service how can I fix this?
on my iPhone 5s it says no service how can I fix this?
Hi
These are the recommended apple steps for no service see if any of this works:
http://support.apple.com/kb/ts4429
Hope this helps -
had a problem with my iphone 3gs.it came from recovery mode,after it it says no service,then activate your iphone..then i follow the steps appeare in the screen..after it it sys could not activate your phone.the server is temporrily unvailable or try to connect to itunes..I tried it many times since january 30 2013 night time.until now it does'nt work...how can u help me to fix my iphone..thanks
so what cn u suggest to do to operate again my phone..
-
Brand new iPhone 5c upgrade says 'no service' when nano sim is inserted.
Hi,
My brother's HTC contract ran out so he got an iPhone 5C last night. He didn't change networks or change his number and the salesman said that the new sim card he gave him would be ready to go when he put it in the phone with the same number etc. When he got it home he put the nano sim into the new phone but it just says 'no service' at the top left of the screen. Has anyone else encountered this?
He's tried restarting the phone and enabling/disabling aeroplane mode as other forums suggested.the salesman said that the new sim card he gave him would be ready to go when he put it in the phone with the same number etc.
I would suggest that just didn't happen call the Carrier customer support and find out the issue -
My iphone 4 is saying "no service" and "searching" how can i correct this issue?
my iphone 4 is working but it says "searching" or "no service" but i put my number on to another phone and it is working just fine. How can i fix this? Please HELP!
Restore your phone as a new device. If that does not work see if you can try a SIM from someone else's phone. If that SIM does not work then the problem is the phone. If the borrowed SIM works then the problem is with your cell provider. In fact, if you went to a retail location for your provider they should have tried another working SIM to determine where the problem is located. If the problem is in your device you will probably have to get an out of warranty replacement if your phone is out of warranty. Being a 4S I suspect the device is out of warranty.
-
HT1688 My iPhone 4 keeps saying no service, do I need apple support to get a new one?
Will apple give me a new phone, without apple care for it keep saying I don't have no service when my phone bill is paid and is on.
The phone has a 1 year warranty. If it is defective, or has failed within the warranty period, and it was not physically damaged, hacked, or jailbroken, Apple will replace it under warranty.
If it is outside of the 1 year warranty, then you can get an out of warranty replacement from Apple for US$149 (for an iPhone 4).
Where things stand between you and your cellular carrier is not a concern to Apple. -
My Iphone 3GS is saying no service
My iphone is saying that it can not connect to any service provider, and saying there is no availible signal, How would I be able to fix this problem?
You mention "restoring cellular network". Not sure what you mean there. If you have restored the device as a new device and it still doesn't work, you seem to have done everything else, including a new SIM. Only thing left is to have the device examined by Apple. An OOW replacement by Apple would be $149USD.
-
After upgrading to iOS 8.1.1 my iPhone 5s is saying no service what do I do?
HELPMe Please
If you're in your carrier's coverage area
Follow these steps, testing after each.
Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Restart your device.
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Contact your carrier to check for any network or account issues.
Restore your iPhone.
If you see No Service while roaming or traveling
You might be outside of your carrier's coverage area. If you're traveling internationally, you'll need an international roaming plan to use your iPhone or iPad. -
Verizon iphone 5 keeps saying no service, help please!
my aunt gave me her Verizon iphone 5, so i poped in a tmobile pre paid nano sim card and it worked for two days then out of no where it said no service and its been like this for a month. i tried refilling but nothing worked. please help!!!!
You can try and re-set the network settings and see if that helps. If not, you may want to restore it.
If there's a problem with the SIM, you need to take it to T-Mobile. We can't do anything about it. If they verify that the SIM is good, or give you a replacement and it still doesn't work, then make an appointment at the genius bar and have them look at it. -
Even after powercycling repeatedly, resetting network settings, resetting all settings and replacing SIM card, my iphone 3GS still says No Service.
Here's what you do
1.Make sure your phone is not plugged into the computer.
2. Put the iPhone into recovery mode (this is NOT DFU mode). Do this by
a). Hold down both the power/sleep button and the home button until the screen turns black/off
b). As soon as this happens release the power button but NOT the home button
c). If done correctly then the Apple logo will appear, KEEP HOLDING THE HOME BUTTON and eventually a connect to itunes graphic will appear. You can release the home button
3. With the connect to itunes graphic on the screen, plug your phone into the computer. iTunes will start up if it is not already on, and then will say the phone needs restoring. Ignore this and COMPLETELY quit iTunes.
4. With iTunes off and the graphic still on the phone screen, hold down both the power/sleep and the home button again for 9 seconds (count 100, 200, 300...) or until the screen goes black
5. When the screen goes black release the home button straight away.
6. It will start up with the iPhone activation screen ignore this. iTunes should have started up, if not do so. Go to the iPhone tab and either resotre from backup or set up as a new phone.
You're welcome -
I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.
wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
I just got an iPhone 4 and I'm trying to use it on the t mobile network. The thing is, I've tried restoring the phone so I could use it. I haven't tried my sim on other phones yet. But I will try to see if it works. The iPhone is supposedly factory unlocked btw. Anyways, when I put in my tmobile sim, it searches for the service, but it always ends up saying NO SERVICE. I checked that my network says that the "phone not allowed". So I don't have 3G on this phone I presume. I heard that you need 3G to have service is that correct? But how do I resolve it? The iPhone does know that my phone carrier is tmobile. It just says no service. And I've tried restoring it three times and turning it off and on and it won't work. I don't have a data plan for tmobile tw! Hopefully someone can help! Thank you so much in advance!
If a phone is sold from one friend to another and wants to use it on a different carrier the friend can contact the carrier it was sold by to request it unlocked. I know AT&T, Verizon, and Sprint will give you the steps to unlock it as long as the original contract it was bought under has been completed. eBay/Craigslist is really not the best place to try to get "unlocked phones" from, if it turns out the phone isn't unlocked then I'm really sorry you got stuck with that one and as stevejobsfan said above I would report them immediately and see if you can recover your money. I sell phones for a living and this happens a lot
-
So A few things occurred, I returned my Iphone 5 because of a defect in the sleep button last week, and then just got it back Monday. I went and got a new Sim Card activated at the AT&T store since the other was deactivated by rep on phone.(long story) Went home upgraded the phone to ios 8 and have my phone constantly searching for service or saying no service. I have done all trouble shooting on apple support and even had another sim card replace. Yesterday I updated to ios 8.2 and guess what it didn't do any good. AT&T stated last week my tower was having probs but the issue was fixed but lte had degrated and was still being worked on, I have not stayed in my city so I don't think that is the issue, I have no idea what to do now. Any suggestions?
My partner had this issue on the iPhone 6 a few days after moving from Windows phone. The move was seamless then no service at all. He called the service provider, they reactivated his phone/sim/whatever and it worked. Then, he had terrible signal issues, 1 bar in the house, the final problem was resolved by purchasing the 4G LTE Microcell. Now, even I have the best service I've ever had since 3G (I know, not saying much though FULL BARS NOW!)
Call AT&T from LAN Line with iPhone in hand.
Go to AT&T store and get the 4G LET Microcell (it's an LTE booster and easy to install.) -
I have Iphone 3G, it is disabled bec kids can't remeber the password. trying to enable thru Itunes but phone won't connect to wifi. it says no service. have also tried to erase/restore the phone thru icloud, but with no internet, it can't be found.
any ideas on how i can restore this phone and reset it??You cannot go back
Basic Troubleshooting
Reset
Restore with back up
Restore as new
After updating did you reset the iPhone ,if not it is like not rebooting after an update to a PC
Maybe you are looking for
-
I have forgotten my restrictions passcode and i dont want to lose any media on my iphone, or any apps, i am scared to back up my media for restore in future as these photos and videos mean a great deal to me, is there any way i could get around it? T
-
Difference in color within same document
Hi, I am running into a peculiar problem within Illustrator CS4. I designed a logo and made another copy to change the shape a little bit. I like the color of the first logo more, but prefer the reshaped second logo. Here is the problem: The first lo
-
Hi, I have this db instance that answer correctly to DEVDB from a service DEVDB Now, I would like to have it accept connection to TESTDB as well. I know it is possible to use some sort of aliases but not sure how to setup the .ora files here are the
-
Oracle XE Not Shutting Down Cleanly
Hello all. I've installed an Oracle XE on an Oracle EL 5.5. Everything looks fine, except for the shutdown script. It does startup nicely with system starts, but if I shutdown the OS, the database just crashes, instead of shutting down cleanly. Any i
-
Strange behaviour concerning JSF phases
Hi all, I have a JSF page that displays two custom JSF tables, A and B with his correspondents pagers. <mycustom:table id="A" ... pager="#{tableA.pager}"> <mycustom:table id="B" ... pager="#{tableB.pager}">I experiment a strange behaviour when I