My iphone 4 no any voice incoming & outgoing call

Please help, my phone no sound incoming & outgoing call

Hi qabil_
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
I hope this information helps ....
Have a great day!
- Judy

Similar Messages

  • No voice during incoming outgoing calls

    Hi, if anyone faced this issue before....there is no voice heard during incoming outgoing calls. However, we are able to talk on Skype or listen to music.

    To me this sounds like the RTP stream problem - it probably does not pass the firewall / nat on the way between SIP provider and you.
    What may have happenned is, that either on your Belkin router/NAT, or on internet ISP's router/NAT the SIP ALG (Application Layer Gateway) was enabled.
    If this is the case,  you need to disable SIP ALG on your router and/or ask your internet ISP to disable it on the firewall router.
    Another issue may have been if you have (accidentaly) changed the port forwarding on your Belkin router, and/or the PAP2T local LAN IP address changed and the port forwarding no longer works.
    So my proposals to check would be :
    - check and DISABLE SIP ALG on your Belkin (if router has this feature)
    - check the port forwarding on your Belkin router ... IF you setup port forwarding for 5060/61 you MUST set the same for RTP ports (16384-16483)
    - if you don't have port forwarding on your Belkin, try to setup forward of 5060-5061 AND 16384-16483*.
    *(If this is too many ports, set the the RTP portrange on PAP2T to 16384-16394 for example and then forward only that range)
    - if neither of above helps, change your Line1 SIP port from 5060 to let's say 6070, and RTP ports to the range let's say 17300 - 17310
    - last you may do on your side is to remove all port forwarding and put the PAP2T to the DMZ settings of your Belkin router.

  • Incoming & Outgoing calls number must view during making call & receive call

    Under one contact name I have 4 to 5 Numbers (Local & International).
    During the incoming & outgoing calls I would like to know that which no I receive and vice versa under that contact name.

    Called ATT...they verified the problem and said it was an intermittent signal problem....
    only issue is I have to keep the phone off to make sure I received voicemails....
    Definitely NOT an iPhone problem, but an ATT problem.

  • HT204266 i am looking for Apps, which can automatically record all the incoming & outgoing calls, which later on can be emailed.

    I am looking for App, which can do automatically record all the incoming & outgoing calls & later on same conversation should be whatsapp or emailed.

    I actually figured it out......  this was the answer:
    dial-peer voice 1 pots
    destination-pattern 1..........
    no digit-strip
    port 0/0/0
    forward-digits all

  • Incoming/outgoing calls either hang up or do not ring.

    Over the last month, Skype has been giving me and others in my house issues.List of symptoms:Incoming/Outgoing calls do not ring.  However, you recieve a missed call notification.Incoming/Outgoing calls ring but are immediately dropped.This has happened to me and others in my house when using a laptop with wifi and/or a PC with an ethernet connection.  Sometimes it works, sometimes it doesn't.  I have the most current version on Skype (in fact, installed an update last night). I do have comcast but figured it wasn't an Internet issue since I can access all web sites.  This only seems to happen when using Skype. Anyone else having this issue?  Know of a way to fix it?  Thanks.

    "Is there anyway to keep it active after hanging up on an incoming phone call. Seems this happens if the phone is in standby when it comes in and answered."
    Hmmm. How is it that you're ending the call? If you're using the "End Call" option and pressing on the button, then it SHOULD stay on. I don't have the manual right here in front of me, but you could download it for yourself and see what it has to say about this. Here is the link for the pdf version.
    http://www.apple.com/support/manuals/iphone/
    Hope this helps out. Oh and if you want, you can right click on that file and choose to download it to your system. Otherwise it will probably display right in your browser.
    Message was edited by: QuickDraw

  • I wish to keep my incomming / outgoing calls  switched off, while 3g / E should be enabled,

    I wish to keep my incomming / outgoing calls  switched off, while 3g / E should be enabled, I dont want to be disturbed with incomming calls while surfing, is there some way to do this in Iphone 4.?

    No. The only thing you can do is reject the call when it comes in.

  • I've installed ios 7.0.6 on my iphone 4 and lost voice on outgoing and incoming calls. My simm is ok, i've checked it, I've done a full clean and restore. Still no calls. Please help.

    Hi there,
    I've just installed ios 7.0.6 on my iphone 4 and now lost voice on outgoing and incoming calls.It rings on incoming and I'm told rings on the recipient's 'phone, but then no vocal communication...its just dead. My simm is ok, i've checked it, I've done a full clean and restore of the 'phone. Still no calls.
    I've not caused any physical or water damage to the 'phone. I would welcome any help/suggestions to get my calls back asap.
    Please help.
    Miss liberty

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    Also consider deleting and reinstalling the Mail Account in question.

  • How can I separate incoming / outgoing call times?

    Hello,
    I'd like to know, is there's any app or tweak which makes my iPhone to be able to separate incoming and outgoing call times?
    Thanks in advance,
    Marcell

    Go to your recent call list - on any contacts click the blue arrow - it will show you the incoming and outgoing calls separatley.

  • "no voice service" no incoming/outgoing calls

    Recently purchased the Q10 & for the first day & half had no dramas.
    After that time I then began to experenice problems calling out. The device stating a call failure please try again later. I was in full reception & was able to use the device & it's other features without any dramas at all, using facebook & twitter etc.
    I originally thought it may have something to do with my service provider. After an exhausting & frustrating phone call with them they found no issue with my service but concided that they couldn't even call my phone.
    I then updated the software on the phone to the newest update. The phone worked again perfectly for about an hour until again the problem recurred.
    I am sure it is a software problem as I am writing & sending this while on my Q10 in the middle of Australia where at times data coverage is a premium.
    I look forward to a promt reply & solution to this issue

    Hi anyo and welcome to the BlackBerry Support Community Forums!
    What version of software do you currently have installed on your BlackBerry Q10? If you insert your SIM into another device, are you able to send and receive phone calls?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • IPhone 4 on iOS 5.1 outgoing call recipient cant hear me...

    just upgraded my iPhone 4 to 5.1 but when I make call the other end cant hear me.. the mute is off etc.. strangely they can hear me if I turn the phone on  "speaker".  I've also tried a full reboot.. ie power and home button.. still the same.
    Any ideas?

    Hi,
    this does not help, this will un-freeze the phone but will just freeze again when I go back into email

  • Abroad - All incoming & Outgoing Calls have Barred on HTC M9 - Need PIN to unbar

    Hi. I landed in Corfu yesterday and I am on 4GEE Extra with HTC M9. Included in package is free international calls and texts. I was able to make and receive a call immediately on entering country... however after a few hours I found I could do neither. On looking at my settings I have noticed that although International Calls are Enabled, 'All Outgoing' & 'All Incoming' caals are disabled... and when trying to enable them it asks for a PIN. The obvious PINs do not work and I have never set one. I have checked over the internet and notive this has happened quite a lot. I have potentially narrowed it down to either the SIM needing reseting by EE or need a PIN2...? I cannot phone 150 so a bit stuck. Need these calls and texts to keep in touch with family so would be so grateful if someone could help please. Thank you (will come online later to check if their is a reply)
    Mark

    Hi ,
    It is not possible to activate roaming via your phone settings. If you can get to a landline to give us a call we will be able to activate this for you.
    Please click here for contact details.
    Thanks
    James
     

  • Incoming/Outgoing Call Problem

    Earlier today, my friend's iPhone was working fine. Then he plugged it into the cassette deck with stereo 1/8" output into the cassette deck to listen to some tunes. Now, he can't hear or be heard when he makes a phone call. The calls still come through and he can make and receive calls, just not hear anything or be heard. When the volume is adjusted, the screen comes up and says Ringer and "headphones" in parenthesis. Can anyone help him to get back to a normal non headphone world?

    If the cassette device you were using does not say that it can be used with the iPhone, it is not a good idea to use that device. This may be the problem that you stumbled upon. I also believe that using these "unapproved for Iphone" devices can void your warranty, so it is best to steer clear of using them. Specifically about your problem, I am sorry to say that I can not help

  • UC560 How can I configure a Patton for incoming/outgoing calls ?

    Hello,
    I have an UC560 and a gateway patton ISDN/T0 who's connecting to the phone provider (Orange / France Telecom).
    Is someone had already configure this ?
    Thank you very much,
    Stephane.

    Sorry i dont give many details.
    I cannot install Cisco UC in the another room it's a problem of responsibility (not a technical problem but an administrative problem).
    And because this config dont want help me, I have only one fiber channel for link my room to another t0 room. Vlan data/admin/VoIP are in the trunk.
    Thank you,
    Stephane.
    Sent from Cisco Technical Support iPhone App

  • My iphone 4 keeps loosing voice in the call

    When making a call i can hear the person but they can't hear me. On 2degree network

    That is also happening to me. Those are bugs from iOS 6

  • SIP trunk INCOMING/OUTGOING calling issue

                    Dears,
                               i am facing  issue i.e inbound / outbound  calls are not wokring  after  configuring SIP trunk . the call flow is
    SERVICEPROVIDER--------sip trunk------VG --------------sip trunk ----------CUCM
    For Outbound calls ---error-----tot tot tot
    For Inbound Calls -----error--- Silence
    Below are the configuration and debugs:

    Appreciate if some provide me Sip configuration and troubleshooting guide...Thankyou

Maybe you are looking for

  • Moving songs from one itunes account to another

    Hi, When my ex and I were together we had one iTunes account which we loaded all our cds on to.  We have now separated and I have created a new iTunes account linked to my iphone.  I still have access to the old account which my ipod nano is currentl

  • Security question to email but forgot question AND email. I want to reset which email the answer will be sent to

    So I forgot my security question in order to make a purchase from the iTunes Store from a card I used to redeem a code into my account. And the card (15$) is now in that account. All purchases require a security question that I must answer to buy....

  • Writing on bbm is completely backwards.

    When I am writing a message in bbm the entire sentence is backwards.  It ends up starting with a  "." and all lettering is completely mirrored.  Any suggestions other than taking out the battery, (which is what I've been doing)  I've taken it to be l

  • Sap dailog instance in lnux

    Hi All, Recentrly we installed ERP EHP5 IDES version in Windows 2008 pc with oracle 11.2.0.1 database. Now i want to install one dailog instance to attach with ides server for testing purpose. For that i try to install application server in suse linu

  • Upgrade to ni-rio 4.0 and now i get project or library corrupt

    I was running Labview 2010. I Installed NI-RIO 4.0.0 and now my project wont load. I get the Project or Library corrupt and the Labview just quits.  Everything was running fine up until that point.  If i change the name of the library so the load doe