My iphone 4 of ios 7.1.1 sim card is not working, it always shows searching whenever i insert sim in it. What can i do? please help me.
My iphone 4 of ios 7.1.1 sim card has not working from since yesterday, it always shows searching whenever i insert sim in it, i do it again and again, but it cant be fix. What can i do? Please help me.
Get a new SIM from your carrier.
Similar Messages
-
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
I cannot realize a call, my SIM card do not works
My Sim card is not working well on my iphone 3g. I put it on iphone, and the iphone recognized it, but the cellphone do not show the cellphone company. And i cant do a call. Can somebody help me?
You are not talking to Apple here, so we cannot check, but I'll give it a whirl.
You said you bought a "without contract" phone. This implies that it is locked to a carrier, but does not require a two-year commitment. However, you also say you put a T-Mobile SIM in it and it works. Obviously the phone has not been hacked since you bought it directly from Apple, so I can't think of another explanation as to why another carrier's SIM would work on a "No contract" phone. -
after i update my mobile sim card its not working i got message from apple to change the sim card and i cant change it please i want fix the problem
Yes, the message is self-explanatory. You need a carrier who supports Apple's activation policy for an iPhone.
iPhone: Wireless carrier support and features - Support - Apple -
My IOS Device 5s Icloud Lock Can i send Imei to Remove cloud account cuz its from Previous Account my fri Forget his password What can i do please help me
Hello, MaoPhanna.
Thank you for visiting Apple Support Communities.
This sounds like Activation Lock has been enabled on this device. Here is some helpful information regarding this feature.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/ht5818
If you purchased your device from a third party, this device may be locked to their Apple ID. If this is the case you may want to check out the article below.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Cheers,
Jason H. -
my iphone 3g has greyed out wifi for the past 2 months, and is out of warranty as far as im aware. what can you do to help your customers!??
First off apple isnt here so they will not answer you. We are user here and we can provide you help
iOS: Wi-Fi or Bluetooth settings grayed out or dim - Support - Apple
iTunes: Restoring iOS software - Support - Apple -
The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?
Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/ -
my camera on my iPhone 5 is not working it's stuck on the shutter screen what can I do please help!!!!
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
iPhone 5 has ran out now it won't charge ? I can't reset because my power button is broke ? What can I do, please help will my one year warranty cover this ?
Try cleaning the dock connector. Try a new cable or charger.
If no luck, it should be covered under warranty. -
i can't turn on my iphone after I use the Itunes.It's updating new software and then my laptop was ran out of battery life what should I do please help me
I'm having a same problem, taking my phone to genius bar tonight. Is there any virus going on??
-
My brother have given me his I-phone3 But he lives in US he has given his phone in India The sim card is not working with the phone What should+I need to do?
Send it back to him and have him unlock the phone for you so you can use it with your carrier.
-
HT1414 my iphone after update don't work , what can I do please help me ??
my iphone after update don't work , what can I do please help me ??
what can I do ?
-
i was trying to update my iphone 5 but it got stuck on itune screen. whenever i try to restore it says error (1669) what can i do. please help
Try these troubleshooting steps.
If that Article did not resolve it... then perhaps a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required..
Be sure to make an appointment first...
Note:
That error message may be indicative of the Device being Hacked / jailbroken.... If this is the case then you are on your own.
Unauthorized modification of iOS...
http://support.apple.com/kb/HT3743 -
When I put my sim card in it comes up with no service. But I put it into a friends one and it started to work and recieve text. I'm not sure why it's doing this and what to do to solve it. Does anyone know?
Most likely you phone is locked to another carrier. Also, see this:
iPhone: Troubleshooting No Service -
HT201415 Mutiple SIM cards are not working in my purchased un-locked iphone and ipad.??
I travel a lot around the world and previously was able to insert a sim card from another network into my iphone and ipad and it worked perfectly.
Recently I updated my iphone and ipad to iSO 6.0. and after that when I put my German SIM card in to both iphone and ipad it would not work any longer?? Got a message No service and after Invalid SIM
I double check with my Carrier and was told all my SIM cards are fine and working correctly from their end.
I then put the sim cards into another HTC phone and it worked so why all of a sudden my iphone which I paid alot of money for purchasing a UNLOCKED phone as opposed to being strapped down with a 2 years contract now my iphone doesnt work with using different sim cards??
Please HELP?This definitely happened with the new 10.7.0.21! We are having the same problem, the apps are all in iTunes but cannot sync anymore! Apple needs a bug fix ASAP.
Maybe you are looking for
-
ITunes upgrade and iPod syncing issues
I opened itunes and it said there was an upgrade for it. I installed it and when I plug in my ipod, it syncs, then when I try to sync it again, it does not. on the initial opening of itunes I noticed that windows has the ipod drive listed as "G". upo
-
After installing of 081.003 firmware version on my Nokia E-72 is not synced field "Car Phone" from E-72 body and Microsoft Outlook. The item "Car Phone" is existing on both. I tried to use Nokia_Suite_3.3.86 & Nokia_PC_Suite_eng 7.1.180.46 - but uns
-
Error code 1007F after file with question mark?!
I have a 13 inch MacBook pro which is just over a year old. For the past week or so it hasnt been connecting to my university wifi network, eduroam. Then this morning, when it started up, I received a blank screen with a question mark flashing, which
-
10g Rename Offline Database Object Broken
I am trying to rename an offline database object. I opened the editor on the object, updated its name and the names of a few of its foreign keys. At first, it appeared to work. The object in the Navigator had the new name, and when I opened a diagram
-
How can I tell if direct-path insert is really being used?
I have a number of INSERT statements with /*+ APPEND */ hints, that I suspect are not using direct-path insert processing. How can I tell (via the plan, via Enterprise Manager, whatever) if direct-path is being used? If it is not being used, then I c