My iphone 4 screen when blue with blue lines.

My iphone 4 screen when blue with blue lines, i can not turn on nor off my phone, everything else seem to be working well, help someone, I called the so called Authorised dealers here in my country and apparently they dont do replacements, HELP PLEASE. I use this phones as a business phone, so i need it up and running ASAP, it did not fall just picked it up and thats what i saw.

Depending on the country where you live, you might have to contact your carrier to get your phone serviced:
Apple - Support - Service Answer Center

Similar Messages

  • I dropped my iphone and the screen has blue lines on it. Siri still works but the screen doesn't but the screen isn't cracked or shattered. What should I do?

    I dropped my iphone and the screen has blue lines on it. Siri still works but the screen doesn't but the screen isn't cracked or shattered. What should I do?

    Bring your phone and $199 to the Apple store for an out of warranty exchange of your phone.  You clearly broke it when you dropped it.

  • My iphone 4 screen is blue

    my iphone 4 screen is blue & resting when I turn on camera.

    you can try turning it off and on again, but i doubt that's gonna work, that sounds like more of a hardware issue. Your best bet may be to contact apple and seek service or replacement

  • .mov from 4S is black screen when played with QT and QT 7/lion

    Q1. .mov from 4S is black screen when played with QT and QT 7 on lion/mac book pro.
    Q2   Also I want to burn it in DVD with common video format. Any recomment free burner software?
    Very very very urgent!! Please help.

    Hello there,
    I have a similar problem! Windows 7 shutdown unexpectedly and since that I can not reboot in windows anymore only with safe mode where everything is a mess.
    Also when it's trying to reboot in windows a blue window appears,says something about drivers  and it is counting something (79.78...till100)but  I m not able to read it cause it disappears immidiately and then black screen and then it turns to reboot in mac which works fine.
    I m sorry if I confused you with my english...
    If anyone knows please help!
    Thanks

  • Bad Screen Laptop Screen - showing blue lines instead of black

    I have an old laptop HP Pavilion DV7-1448dx, the screen shows blue lines instead of black. I tried using TV as a monitor and it doesnt have any problem, it only shows on the laptop. I replaced the LCD screen with a brand new screen but it still shows the same problem. I attached the pictures of what my screen looks like. It only shows this on the black color and the others are ok. Pls help! 

    @luv2travl ,
    Hello and welcome to the HP support forum.  Thank you for posting about your display issue.
    It sounds as if the RGB output of the graphics card has become a bit off in your case.  You have replaced the screen so the output that supplies the LCD from the graphics card is the issue.  
    As you stated on a VGA output to a TV it looks normal. Therefor it isnt the card totally having the problem.  
    Here is a link you can check out on display issues.
    Display Quality Issues
    Here is a link to your systems Maintenance and Service guide as well.  One thing you may want to check is the actual cable that connects the screen to the motherboard.  This is the easiest and cheapest part to work with.  
    If you replace the connection cable from the motherboard to the monitor this may fix the issue.
    HP Pavilion dv7 Entertainment PC Maintenance and Service Guide
    Please let me know how thing go with this.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • IPhone 3G screen goes white with thin black moving lines.

    iPhone 3G screen goes white with thin black moving lines.What gives?
    HowieG1

    hello
    Dear
    The two crashes iPhone suddenly does not work never
    It does not work and is the connection between the device and iTunes
    What is the solution?

  • Turning off the iPad screen when synchronizing with the iTunes

    Quick question: How do I turn off the iPad screen when synchronizing with the iTunes. Is this even possible? Are there settings I am overlooking? Or perhaps a third-party app which can make it happen?
    I have a large library and often leave my iPad connected to iTunes for several hours at a stretch. The bright glowing screen can be a big distraction, and, more importantly I am very worried about pixel burn-in.
    Cheers,

    The iPad LED Backlit IPS Screen is not phosphor-based, so there is no permanent phosphor burn-in problem. You might see some image persistence, but that is not permanent and can be corrected. See this support article about image persistence: http://support.apple.com/kb/HT2807
    Since you have already converted your music to 128 kbps, you are unlikely to see any more 10+ hour syncs unless you have to do a restore. In that event, you could select the brightness control in settings to the lowest level.
    FYI, there are some apps, such as Night stand HD that are designed to be used for long periods with unvarying displays and I have yet to see image persistence problems reported. However, since the iPad is still a new product, there may be some reports in the future.

  • My iPhone's screen is black with a white search circle in the middle of it. I can't get it to turn on or off?

    My iPhone's screen is black with a white search circle in the middle of it. I can't get it to turn on or off. What should I do?

    Try doing a hard reset - by holding the 'Power' button on the top and the 'Home' button simultaneously!

  • My iphone 4 screen is stuck with the apple logo on it , Help!

    My iphone 4 screen is stuck with the apple logo on it and i have tried holding the home button and power button down for 20 seconds but nothing is happining , meaning the phone isnt loading up has anyone got any idea what the problem could be ?

    Plug the phone into your computer via the USB cable and open iTunes.
    Once you have connected the phone to your computer and opened iTunes, hold the home and sleep buttons down until it goes blank.  You are now in DFU mode.  Click the restore button in iTunes.
    Note: You will lose all data.  You can restore from a backup if you previously saved one.

  • Hey, I broke my iPhone 4 screen when I change it my phone start to turn off while my battery reach the 25% when I connect it to the charger it switched on, and the battery percentage is around 25% so it's the time for a new battery, or I need to calibrate

    hey, I broke my iPhone 4 screen when I change it my phone start to turn off while my battery reach the 25% when I connect it to the charger it switched on, and the battery percentage is around 25% so it's the time for a new battery, or I need to calibrate it? thank you

    There are no user serviceable parts in an iPhone. Since you
    made an unauthorized repair to your iPhone, you will have to
    seek assistance elsewhere.
    Google or ifixit.com may provide some direction, but you can
    get no help here per Terms of Service. Sorry to tell you this,
    but it is what it is.

  • The camera on my iphone4 opens up but seconds after the screen turns black with white line.

    Hi guys! Please help me I have iPhone 4 .the camera although opens up when I press the button, but seconds after the screen turns black with white line. Need I need it repaired or there is some trick which can set it right.?

  • My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min.  Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

    My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min.  Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.  Will a hard restart wipe all that out?

    Agree with Richard:
    -Your device needs both the CR and LF. To accomplish this:
    option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
    option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
    Details can be seen in this link:
    http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
    "Adding Termination Characters to VISA Serial Writes in LabVIEW"
    Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
    If someone find a working link please post it.
    Regards

  • My iPhone screen has blue lines

    I dropped my iPhone just a few hours ago, but didnt check its condition. A few hours later, when i turned my phone on, the screen was grey with blue lines. I could still hear the lock sounds and could feel the vibrations when someone called.
    HELP MEE PWEASE!!!

    You broke your phone.  What help do you need?  Bring it in to Apple (along with $199 if you didn't have AppleCare+) for out of warranty exchange.

  • My iPhone 4s screen is blue, what's wrong?

    HI, about two weeks ago, I dropped my iPhone and the screen went black with blue vertical Stripes, within these two weeks, I have hoped something would change, but it is exactly the same. Please note that I have tried to reset it, and no change, I am prepared to replace whatever is wrong with it, but I'm not sure what it is!? Does anybody know what i need to fix, or any good places that aren't too expensive to do this at? Thank you!!

    There is nothing the user can fix, according to Apple, so best approach is a visit to an Apple store genius bar to have the technicians take care of it.
    You can see what is available from http://www.iFixit.com  but it you do that and damage anything, Apple will not provide any service or support.

  • My iphone 5 screen went blue but still on. can someone helpme?

    my iphone 5 screen went black a few minutes later it was working again, the day after it just went blue but my iphone still working , 2 days have gone and nothing happened. what to do?

    Hello, jaimerodgz. 
    Thank you for visiting Apple Support Communities. 
    Here is a resource that may provide some troubleshooting steps to help with this issue.  See the section related to the iPhone display.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If all troubleshooting steps have been processed, I would recommend taking a look at the section labeled Issue not resolved.
    Cheers,
    Jason H.

Maybe you are looking for

  • How to set multiple parameters in one EXECUTE IMMEDIATE sql

    I want to set both nls_language and nls_date_language, and set them as different languages. fnd_global.set_nls_context() doesn't work. So I think maybe I can use the EXECUTE IMMEDIATE, and add them together into one statement. But I don't know how to

  • "Capture 3D plug-in damaged" error upon start of Acrobat 9 Pro Extended - Possible Fix

    After installing Acrobat Pro Extended 9.0.332, I received a "capture 3d plug-in damaged" error every time the program started. Looking for remnants of SolidWorks in the registry found nothing. Here's what fixed the problem for me: I am running Kasper

  • Is there any way to create time-sensitive deactivation of an .exe for Captivate 4?

    Hey there,   I've long-distance customers that want to preview the eLearning content before they accept anything; however, the company doesn't want any these files floating around.  I'm looking to restrict access to the file after a certain amount of

  • My iphoto wont load my pictures to iPhoto

    i havent had a problem importing my pictures but last time i had alot of difficulty. when i plug in my phone it usually says like loading like 20 out of 30 pics and then shows all of them and lets you import. well last time i fianlly got it to finish

  • Player help - xml driven mp3

    Hi, I have been working on a different effect for a xml driven mp3 mini player; it consists of three buttons that plays, pauses and unpauses. Only one button is displayed on screen, to its user. Now the problem I've got is that when the song ends, th