My iPhone 4 shuts down by itself and doesn't turn on

I have an iPhone 4, today randomly it turned off for 2 hours, when I realized I tried to turn it on but nothing worked until I restarted it. It can't be the batter because it had 85%. Any idea for my situation??? I bought it in June.

Hello there gilcelis99.
The following Knowledge Base article offers up some great steps for troubleshooting the issue you're describing:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • After 2 weeks my Iphone 4s shuts down by itself and I cannot  turn it on. What can I do. Itunes is telling me to restore the phone but the phone is saying the software isn't available

    My Iphone 4s  shut down by itself after a phone call and I cannot turn it on. I took it to istore and they said it was unrespinsive and there is nothing they can do? Anyone has a clue what can be done? When I connect the phone to itunes it indicates that the phone should be restored, however when i try to restore it, it says the "software for this iphone is not currently available" Is there anything I can do other than put this brand new iphone in the grabage?

    On computer, at the top of this page is a Tab for iTunes, click it, make sure iTunes is up to date. Also make sure computer Fire Wall and Anti Virus do not interfere with iTunes, turn them OFF to be certain.

  • Iphone 4S shut down by itself and will not turn on.

    I was using my phone in the car on Sunday and it was working perfectly fine, got home and placed it on the table. Went away for 10-15 mintues and I had come back to find it was off which I thought odd as the battery was almost fully charged. I attempted to wake it using the sleep wake button - nothing. I assumed it had gone flat for some reason so I put it on charge, an hour later still nothing, plugged it into the computer - nothing. Tried to hold down the sleep/wake + home button for 30-45 seconds - NOTHING Itunes wouldnt recognized it either it has been off since Sunday afternoon and hasn't turned back on at all - no heat either. It is still under warranty so I am hoping I'll get a replacement when I send it to apple it's about 10 months old + water indicators have not been set off.
    Any help or ideas would be appreciated I think I have tried almost everything to try to get it working.

    See this Discussion
    https://discussions.apple.com/message/19521062

  • IPod Touch 5th Gen shut down by itself, and will not turn back on?

    I was just on the YouTube app when suddenly my iPod shut itself down, and the battery was well over 50%.
    It will not turn back on, and when I plug it into the charger, nothing changes. Any suggestions?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Eep! shut down by itself and won't turn back on.

    i just tried to wake my computer, but when i pressed the space bar it turned off immediatly. now when i try to turn it on nothing happens. no lights. no noise. there is definatly power coming from the outlet and power strip. i dont know what else to do.
    help me, please.

    This was in the tutorial;
    -I found this on a Mac site. Sometimes computers lose their mind. Don't ask me why or how it happens but it does. Sometimes you simply have to totally discharge the computer. One thing I have learned about the Blue and white and the Gray G4 Macs is that sometimes pushing the PMU is not enough. If your machine is dead, then try the following.
    * Unplug the unit.
    * Remove the battery
    * Push the PMU switch (count to 5 slow)
    * Push the start button on the front of the Mac (count to 5 slow)
    * Let the unit sit for 15-30 minutes
    * Replace the battery
    * Plug it back in, and push the start button
    If it doesn't work I usually repeat the steps above, pull the RAM, and let it sit longer. If it doesn't work after this, it is take it to the shop time.
    Cheers!
    DALE

  • My IPhone shut off by itself and I can't turn it back on. My lock screen button is broken and I tried plugging it into the wall but nothing happened. Can you guys please help me.

    My IPhone shut off by itself and I can't turn it back on. My lock screen button is broken and I tried plugging it into the wall but nothing happened. Can you guys please help me.

    IIf the battery was completely drained it might take some time before the phone will respond. Wait at least 30 minutes with the phone connected to the charger. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the phone starts up let it continue to charge until it's 100%.
    if the broken button will not let you do the reset Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Macbook shutting down by itself, and very hot when being used

    Hello!
    My 2009 Macbook has me worried. When I put it in sleep mode and plug it in, it shuts down by itself at some point, so every time I go to use it again, I have to turn it on as though I had initially shut it down. Also, the bottom of my laptop is very hot.
    Does anyone have any idea what might be going on? I am so grateful for your input!
    I am just outside of my Apple Care warranty coverage, unfortunately.
    Kavita

    Answer to ur 1st question : it's just gonna be a standby mode ! once u want to turn it up , just swipe up from bottom to the top.
    Answer to ur 2nd question : it's quite normal ! don't be nervous.
    kind-hearted Pb specilist .
    PLS give me a kudo if I help u with issue U r encoutering~!
    Any questions, feel free to let me know.

  • Satellite A100 - Shut down by itself and will not boot anymore

    Satellite A100 PSAA9A-10U038. Laptop shut down by itself whilst in use. No BIOS upgrades or changes. No lights of any kind showing, no POST.
    I have tried the AC power adapter on another machine and works fine. Called Toshiba told me power adapter probably at fault, if I wish to have them look will cost $120.
    I'm thinking maybe motherboard died? Any help would be appreciated.
    Tony

    hi Laptop Larry,
    try to boot without the batterypack....
    can you see the "toshiba screen" while booting?
    you can also try to:
    - remove hdd
    - remove added memory (with no mem the unit should "beep")
    - remove odd (cd-drive)
    if you cant get the system to boot (able to enter bios, see toshiba logo on screen, no beep)
    than it's possible that your mobo died...

  • Do I have a ghost ?? pc shuts down by itself and restarts when playing flash games..

    Hi, have a hp dc 7700 USDT with a DC 7700 SFF board in it, 4 gig ram, 750 gig HD, xp pro, 32 bit,  just recently windows started shutting down the pc and restarting on it's own only when playing farmville, (flash game).. really weird.. what I have done >> I have done a full malware & virus scan with advest, a couple threats found and deleted, did a chkdsk on it, performed a restore to a earlier date, still have the same problem.. ran JRT and no threats found,  has anyone seen this before??  other than farmville, there is no other problems with it, my other dc7700 cmt's don't have a problem when doing farmville.. have to fix it,wife's pc..
    This question was solved.
    View Solution.

    Boatmoter, welcome to the forum.
    Have you checked to see if the computer is overheating while gaming.  Games are intense and can cause heat to rise.  This can definitely cause the computer to restart unexpectedly.  There are many FREE programs that you can use to check the temps.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • HT201413 My iphone shut down, I started the restore process as detailed by various other users.  However the Iphone shuts down while restoring and when it switches back on I get message from Itunes with error 21.  I now can't access the Iphone at all.

    My Iphone started shutting down and switching back on by itself. After researching problem, lots of results pointed towards restoring phone.  I commenced the process and all was going well until the phone shut down during the restore and Itunes then flagged up an error 21 code.  I now am stuck as the phone is in restore mode but I can't stop it switching off during the process.

    iTunes error code 21 is a security software conflict and the recommended knowledge base article for troubleshooting is:  http://support.apple.com/kb/TS3125  Check through that and see if it helps.  If nothing works you may need to visit the Apple genius bar and have one of those people help clear it.

  • My iphone shuts off by itself, and refuses to charge to any source.

    I bought an ulnocked iPhone 4 a week ago in Hawaii. I'm from Argentina, so I got back and asked for a microsim card in my local carrier (Claro), which took about 4 days (they're annoying). When I finally activated my iPhone, I tried to charge it in an iMac, and all I got was the plug icon. iTunes DID recognize the device, but it was not charging. I plugged it to a wall source. The same thing happened. Then, I made a Restore via iTunes. No luck. I tried upgrading the IOS to 5.1. No luck again. The battery percentage stayed always the same. Afterwards, it started to shut off by itself. Connected to a source or not. Everytime the phone was ON again, the battery percentage became updated, which suggested me that there was occurring some charging...
    The next day, I took my iPhone to a Reseller here (called iPoint -there are no Apple Stores in Argentina-) and told my problem, but, when I connected the phone there, the bolt icon finally appeared. I thought the problem was solved, but when I came back home, i realised that even the icon was there, the battery percentage didn't change either. Then it commenced to turn itself off again and again. This happens more quickly if I have the iPhone connected to a power source, but it happens anyway if it's not...
    I'm feeling like I can't rely on Apple anymore as a safe choice. It use to be a warranty of perfection...
    I'm a bit desperate, hope someone can help me...
    Thanks!

    Hello,
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.

  • Monolingual, dead apps, shuts down by itself and reformat concerns

    Hi, I'm new on Mac, so any advice given to me should be clear and without abbreviation, so I can follow it properly. Thx.
    1- I used monolingual without unchecking all the stuff in the two last tabs. The first tab was for the languages, the two last, for the architecture and some other internal components.
    2- Since then, my whole Office won't work. I also discovered recently that Toast Titanium and Mac the Ripper would not open either (I did not try them before, thought).
    3- Lately, my MacBook would just shut down just after I open it, sometimes 2 times in a row before I can use it. It just happened 5 minutes ago, while I was just surfing on Firefox.
    4- When Office was the only symptom, a friend told me to reinstall Office. Now that i have bigger problems, he tells me I should reformat Mac OS. He told me reformatting a Mac is a heavier operation, that as opposed to Windows, it keeps some traces from the older installation, that it is impossible to remove everything, just like if this installation waws the layer on which I a going to reformat and over which the new Mac OS is going to install itself.
    I am aware I shoud reformat, even though I did not try to fix the shuts down any other way. I realized that it happens to a lot of user while reading the discussions of some topics. Anyway, my priority concern is the fourth point of my topic. I would still like to know if reformatting is my only way, if there is any other solution.
    Thaks in advance, sorry for my bad English, I am francophone.
    Regards

    You have described two main problems:
    1. You used Monolingual in a way that may have removed all the ability to run non-Intel applications, e.g. MS Office.
    2. The shutdown problem.
    To be sure of fixing the first problem, you can reinstall the OS. There are two choices for reinstalling: erase and install, or archive and install. They are described here:
    http://docs.info.apple.com/article.html?artnum=301270
    Once you have restored the OS, then you can see which applications do not work, and reinstall them. What your friend said about reinstalling the OS is not correct. If you do an archive and install, you will still have your old files from which you can choose what to keep. If you do an erase and install, none of your old files will remain on your disk.
    If you are still having the problem with shutdown, contact Apple.

  • IMac DV G3 Lime shuts down by itself and buzzes

    Not sure why this keeps happening. It starts up and runs for about 20 minutes and then shuts down but the light on the front stays on and buzzes. Can't start up again until I unplug it from the wall for a long time. When it's running everything works fine. I LOVE this Mac and want to keep using it. I've had it since brand new oh 2000 something. I have an iBook G4 with 10.4 that I use for everything and everywhere but this iMac is the family computer. Can anyone offer advice? Should I take it to a Genius Bar? Thanks!

    Hi,
    I dumpster dive, gather, restore, upgrade and repair iMacs near Chicago.
    These are typically high needs schools. Many have no computers at all!
    The iMac is particularly well suited to this application.
    A. It has a small foot print and is self contained.
    B. Mac software is intuitive and easy for teachers and students to use
    right away.
    C. The kids think they're cute! I've seen kids hug iMacs! I don't see
    that with any other computer.
    So I can see why you're so attached to your Lime iMac. My 9 year old daughter calls her's "Pinky" (Strawberry iMac).
    Generally the symptoms you're describing are due to a failing PAV board. This is the brown board that you can see under the clear top with all the big parts on it. The most likely culprit is the flyback transformer. The insulation breaks down with long usage when it heats up and starts to fail. Usually shorts out probably the buzzing you hear. Sometimes this will fail but the computer will still run with an external monitor. (spigot is under the perforated grill under toward the back.)
    My general repair procedure with these is to pull the logic board and put it into a working 350.
    An alternative in your case would be to find a working 400 - 700 used, buy it ($20 - $70 around here in Chicago) and swap the colored parts on your Lime onto that machine.
    Richard

  • MBP17 shut down by itself, now doesn't boot up, black screen - what now?

    I was processing some photos in PS CS3 and my macbookpro 17" (2006 model - not sure exactly what version of 10.4 I have - its gotten every auto update that Apple sends me, No Leopard though) and it shut down on its own. It was plugged in at the time.
    I tried to power it back on after 10 minutes and the light on the lid release would come on and then leave. So I waited more. Finally, it powered up and the light would come on, but its dim. The screen stays black. Close lid and light gets brighter. I can hear fans running and the sound of it starting up but its just a couple clicks (sounds like its coming from behind the power button).
    I've tried every Apple key combo I've come across and tried resetting NVRAM and PMU. Still nothing. Battery has all 5 lights green.
    I've read something about this "Safe Sleep" mode. Could that be the issue?
    Otherwise, how can I get to this Single User or Verbose mode if the screen stays black? Or am I pretty screwed here?
    Any help is greatly appreciated in advance! Thank you.

    Unable to put a disc in. Had a friend who tried to connect by firewire with his computer and do some diagnostics, but he was unable to connect to it.
    I press the power button and screen stays black. I hear fans going and the laptop gets warm like usual. Latch light turns on, but I hear no processor noise/clicking like you hear when you normally start up a Mac. It just sits there with a black screen. I'm unable to start up in single user or verbose. Again, I've tried resetting every possible thing to reset and powering up using every single keystroke I've come across. Unable to do anything but press the power button on & off.
    This is not a ongoing, random issue. It just shut down on its own and now won't boot up. This is the one and only issue i've had with this laptop. Its treated me well until now.
    I've got an ext enclosure ordered and on the way to check if I can at least access the HD in the meantime. Right now I'm going to let it run down on battery power to see if that will trigger something.
    Has anyone seen/heard of similar situations/occurances?

  • Ever since my upgrade to IOS 5, my ipad 1 has been causing a lot of problems. The apps shut down by itself and I even have tried to reset the iPad but no real effect.

    Help. Ever since my upgrade to ios5, any and all apps simply close by themself. I have tried to shut down all the apps which are not in use and I have also reset the iPad a few times (reboot) and yet there is no real effect. Is there a way to go back to the older ios so that I can have peace of mind. It is a crying shame to see all such hassles with ios5.

    Downgrading to an older iOS version is not supported on iOS devices.
    Make sure that you have downloaded all of the updates for your apps and see if that helps.
    Try this as well. if the Apple apps are working OK and it is the third party App Store apps that are crashing - try downloading another app - any free app. See if that helps.
    You said that you reset the iPad but you may have to restore your iPad to factory settings and then to a backup if you can't resolve the problem.

Maybe you are looking for

  • I am very disappointed in the lack of concern for customer satisfaction...

    I have previously been totally satisfied with the customer service and friendliness of the staff at Best Buy.  This, however, has taken a turn of 180 degrees.  Recently I purchased 2 smartphones. The salesperson was friendly and very helpful.  At the

  • Creating an image file from cd

    Good day, I was wondering how if anyone knows a way to create an ISO image from a cd to run on virtual box. I tried creating one using disk utility, but it did not work. Can this be done through Snow Leopard default programs, or would I need to purch

  • R200, tv out and old fglrx driver

    Hi I read that i need proprietary drivers for my Radeon 8500LE (R200)  because open source driver doesn`t support tv-out but Fglrx support my card only up to 8.28 version. I found legacy 8.28 driver in AUR but it requirements patch for kernel and if

  • Javax.ejb.NoSuchEntityException

    The current implementation uses MDB to post business requests to the WL server to execute asynchronously. The MDB in turn calls business EJB (Stateless) method to accomplish the task. The business EJB "invoke" method processes each request in a for l

  • Crystal Reports 8.5 and Pervasive SQL 8

    Post Author: manza CA Forum: Data Connectivity and SQL Hi. I have configured a report in CR 8.5 Prof with the direct access to Data Files for Pervasive 8. If I execute the report, everything works fine. If I try Verify Database, CR tells me: "Choose