My iphone 4 still thinks my headphones are connected
my iphone 4 still thinks my headphones are still connected, ive tried blowing it out and sucking on the jack nand taking it out and putting it back in many time and it still wont work, any ideas?
Have you tried shutting down the phone completely? Restarting it may clear some software setting to allow the headphone jack to realize there's nothing attached.
Similar Messages
-
My iphone still thinks my headphones are connected
i have tried reseting and it does not work. how do i fix it?
See this Discussion
https://discussions.apple.com/message/15773088#15773088
And...
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to your Local Apple Store is the Next Step... -
My I phone thinks the headphones are plugged in and they are not.
help my I phnes think the headphones are plugged in and they are not
Try inserting and re-inserting your headphones 7 or 8 times. Also try cleaning out the headphone jack in case of debris that might be interfering with the connection/disconnection.
-
I have an iPhone 5 and when I go to raise or lower my volume it says my headphones are connected and they are not how do I fix this?
more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
and here
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=UTF-8&oe=UTF-8 -
My IPod Touch Stucks when the headphones are connected
Hi,
My Ipod Touch 2G (2.2) stucks after few minutes when the headphones are connected (genuines APPLE or genuines for Iphone + Mic).
When I listen the music, after few minutes the song stops and the apple appears on the screen.
Do you have an idea of what's wrong ?
Best regardsI think I fix the problem.
It wasn't besause of the headphones but the two small magnets there was on the cover of the leather case.
I removed them and the Ipod seems to work fine now ... I test again ...
Any other victims ????? -
when i play music on my mini no sound comes out, so i push the volume button thinking it was turned down and it keeps saying headphones like headphones are connected and they are not even plugged in>
Hi Try a, reboot, press & hold power button & menu, button, hold both down until you see Apple Logo. Before you do Reboot, Sign out, of itunes on ipad then sign, back in this may help. Cheers Brian
-
Why does my Ipad say headphones are connected when they are not?
I do not have sound on my iPad1. When I try to turn up the volum it indicates headphones are connected, but they are not. When I do use headphones they do work. I have rebooted the iPad, reset and restored the iPad and the issue still exists. Is this a straight hardware problem?
iPad has a mechanical switch inside the jack so it knows when the headphones are plugged in.
It may be stuck.
Inspect it to see if something is in there, such as toe jam.
Blow the port out with compressed air.
Try inserting and removing a headphone plug several times. -
HT5858 iPhone thinks headphones are connected
My iphone 4S with iOS 7.0.2 won't put any sound to the speakers because it thinks there are a headphones connected. I have some bluetooth headphones, but I have bluetooth disabled. Any ideas?
Hi jeberhardt,
Thanks for visiting Apple Support Communities.
I recommend trying these steps if the iPhone incorrectly registers that headphones are plugged in:
Ensure that there is nothing plugged in to the headset jack or the dock connector.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
These steps come from the related troubleshooting article:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Best Regards,
Jeremy -
Itouch thinks headphones are connected when they aren't
My itouch (2nd gen)connects well to headphones, but when I remove the headphones it thinks they are still connected. I've tried restarting, resetting, and restoring already. The volume control buttons work, but come up saying there are headphones in when there aren't. The headphone jack is clean too. Anyone have any ideas???
I have the same problem. Have tried inserting removing headphones multiple times, looking for debris, the water damage indicator is still white, reboot, restore, etc. Still the iPod thinks that the headphones are always attached when they are not.
This is very frustrating, as it seems many are having this same issue. My iPod Touch is just a little over a year old, and I have taken care of it. It's disappointing that the answer seems to be bad hardware on Apples part. -
My phone thinks the headphones are plugged in and I can't get any sounds. How to fix?
My iphone 5 thinks that the headphones are plugged in and they are not. I used them earlier today but they are no longer plugged in to the phone. I can't get any sound (text alerts, ringing, etc) on the phone outside headphones. Any ideas on how to fix?
I have resolved my own problem thanks to reviewing other discussions. The solution that worked for me and that was suggested by an Apple store associate some time ago was to plug and unplug my headphone jack into the iPad four times. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound. When you use the external volume control the HEADPHONE label should be gone. It appears I have to do this now every time after I've used my headphone jack.
-
Why does it Think so and is there something I can do to fix it or do I have to send it in for fixing.?? tried to reset it..
The same thing happened to me on my old iPhone 3G. My guess was that water entered the headphone jack, and somehow made some short inside it making the iPhone believe that the headphone was plugged in. Pluggin and unpluggin the headset many times proved that sometimes it worked ok for a while, so what I did to solve the problem was spraying some good quality contact cleaner inside the jack, and voilá, still works fine after one year of the problem. Make sure you use a good quality contact cleaner WITHOUT LUBE, ( WD40 IS NOT GOOD FOR THIS PURPOSE) otherwise the lube will remain in the inside of your screen without a chance of cleaning it unless you dissasemble the iphone. A good quality contact cleanner should displace water and grease,and leave no residue after it evaporates ( IPA Iso Prophyl Alcohol, Hexane, or Heptane based products are ok)
The other possibility is taking it to the repair shop, and have it looked by an expert. Good luck! -
The title says it all. I have tried restarting and restoring the ipod and neither worked. I even tried cleaning the headhone jack.
You headphone jack is defective and needs to be replaced.
Here is one third-aprty place. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Apple will exchange your iPOd for a refurbished one for:
Apple - Support - iPod - Repair pricing -
Hai..
I have disabled block pop up in my iphone 5s.. but still i couldn't connect my mobile with my college wifi.. it shows the error message as "ensure all the pop ups are not blocked"....You might want to talk to the IT dept. at your school to see if they know of a solution.
-
IPhone thinks thought headphones were connected - now dead!
Two days ago my iPhone 4S would not work without headphones - when the headphones weren't plugged in it was like it thought they were (when I adjusted the volume it said "headphones") - I plugged the headphones in & out several times & it seemed to resolve the problem.
The phone has worked fine ever since, but I just picked it up now to use it & the screen was black like it was turned off, even though it was recently fully charged. It won't turn up & nothing is happening when I plug it in! Help!try dowing a hard reset. holding down the home button and the power button at the same time.
-
CC still thinks deleted apps are on my computer
Creative cloud thinks Audition and Premier are on my computer; however, I deleted them long ago. Now I need to use Audition but can't. I'm on OSX Mavericks. Thanks!
Hi zenyatta11,
Please refer the article: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.
Regards,
Romit Sinha
Maybe you are looking for
-
Multi-Factor Authentication with Azure, need to know limitations
Hello, This forum was recommended as a place to ask MFA questions. The manager desires all the domain admins accounts to use MFA, when used for any purpose, but especially for when these accounts are used for managing the domain, either via workstati
-
Intercompany STO excise invoice
Dear Experts, We are doing intercompany STO with excise invoice. First we create Purchase order, then do the background delivery through VL10B, then VL02N for PGI. Till this step, everything is coming properly. Our problem starts at billing level. Ou
-
Project-network- subactivities
Hi Guru's In my business scanerio, i have an project in which there is sub- activity( eg planing, designing, testing etc. all are service activity) my resouces ( employee in service project) will be allocated in subactivity level & their invoice shou
-
In the new 12 Apps of Christmas commercial...
What is the app that turns on the Christmas tree in the 12 Apps of Xmas commercial? I really want to know, so please reply. I looked under Holiday Apps and couldn't find it and went to the commercial on here, and it just linked me to the holiday apps
-
Default printers in sap?
Hello Experts, what are the default printers in SAP?