My iphone 4 turns off and on when ever i try to reboot and turn off each and every 5 second?
hi there,
my iphone 4 turns off and on in each and every 5 seconds when ever i try to reboot and turn off. i was just trying to get ridge of this things. so culd u help me plz !!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Hello my friend just bought an iphone 5 and he is able to imessage me but I can't imessage him with my iPhone 4S, when ever I try it only sends a text message and I Checked and we both have wifi/ service and both have osi7 interface?
I think your problem is the fact that your friend is not registered through iMessage, just text messages. I would look around and check out how to set up iMessage on iPhones.
-
I am using a Windows 7 laptop, 64 bit. When ever I try to open iTunes, it immediately freezes and says "iTunes has encountered a problem and needs to close." I have tried uninstalling then reinstalling, and also going back to previous versions. Any ideas as to how to fix this? Thanks!!
You need to remove all installer file, uninstall iTunes and all related programs, then do a clean install.
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?
I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project. Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels. I resampled the stills and everything was fine again. Hope this might help.
-
When ever I try to download creative cloud it disappears and doesn't fully install
There is an error whenever I try to download creative cloud
Hi mariah45,
Please refer to the following help document to get the issue fixed:
Adobe Application Manager missing after installing update
Regards,
Sheena -
my iphone was charging and turned off and wont turn on now even when it is connected it will just turn on just the apple and turn back off
steps665 wrote:
..., the problem is that my Sleep/mode button does not work.
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is Required...
Be sure to make an appointment first... -
My iPhone randomly turns off by itself with battery remaining. I can turn it on the by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?
When my phone was off it wouldn't connect to iTunes, i got it working now though. I just had to hold my lock button and my home button down long enough. Thanks anyways though!
-
does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?
Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
If this does not work, you should get it serviced:
Apple - Support - Service Answer Center
How to back up your data and set up as a new device -
I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!
If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.
-
I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
-
My i movie keeps on crashing when ever i try to share it or play it in fullscreen . How do i save it and not loose the movie!
Hi
This is bit of a Nightmare situation - and there can be a zillion reasons for why it goes wrong. See if You might find help in my list.
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
when ever i try to download my iPod recovery software, it keeps saying connection timed out. really annoyed and need help to fix it
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
If the iPod was Disabled, place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
I am using old iphone 3G with capacity of 8GB memory, when ever I try to download any application it is telling it require newer version of software or iOS 4.3. can I get this software or not. I even restore my all my software online, in that process I lost my contacts, photos, notes & mails stored & saved in my iphone. After that also no use, Please advise how and where can I get that.
Iphone 3g can only go to 4.2.1
Sorry -
I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine.It is quite strange as well. Have you encountered this issue before?If yes then what's the solution?
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue.... This thing is so annoying when trying to go somewhere i just want the error message to go away.
In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks
Maybe you are looking for
-
My husband bought a new Ipad Mini and he created a new Apple ID and new password for him, but his old Ipad was under my Apple ID and Icloud too. Now he wants to get his pictures from Icloud to his new Ipad, What do i need to do?
-
Support for Windows 2003 on AGS 2.1
I've been trying to find out if AGS2.1 is supported on Windows 2003 and 2003 SP1. The installation and configuration guide document for AGS 2.0 states that the minimum system requirements are either Windows 2000 Server or NT 4.0 Server with SP6a. Wou
-
Hard Line Breaks in JEditorPane
Hello All - How can I create hard line breaks in a JEditorPane's document with HTMLEditorKit after a line wraps. In other words, I'd like to see a <br> when the cursor moves to the next line. Please Help ! Norman
-
No trayicon for gajim in plasma (kde5)
Gajim is a python/gtk2 xmpp application. In preferences -> notifications the option "Show notification area icon" is set to "Always" but I don't get a tray icon in Plasma. Any ideas how to enable it? (the problem is that if I close the roster window
-
Gibberish when unzipping files in Putty
Hello. I'm ingesting files from one system (db hosted on Solaris 10) to another (db hosted on Solaris 9). Files come in zipped, and contain various txt files, which I'll use SQL*Loader to load. The unzipping, loading etc. is all handled in a ksh shel