My iPhone 4 using iOS 6 is creating multiple copies of random voicemail messages

My iPhone 4 using iOS 6 is creating multiple copies of random voicemail messages. How can I correct this I am deleting up to 10 - 15 duplicate voicemail messages daily.

Had the same problem... talked to a Genius and he contacted Verizon Wireless (my carrier). Turns out the problem is Verizon's.  Contact Support and tell them you'd like your VoiceMail RESET (you will lose all your current voicemails).  Should correct the problem.

Similar Messages

  • IOS 8 creating multiple group messages with same recipients

    After updating to iOS 8.0, my iPhone 5s has started creating multiple group messages with the same recipients. For example, my phone has created three group threads with the exact same people in it. Different friends' messages go to different threads. It is terrible confusing and annoying. It has done this with several of my group messages. Deleting the duplicate threads have not worked. They keep recreating themselves when certain people text the group.
    Any suggestions? This has been a problem for many of my friends as well.

    Hi hkapn,
    Do you and your wife use the same Apple ID and are connected to the same wifi network?  Your phone ringing to multiple devices is called Continuity and is a feature of iOS8. https://www.apple.com/ios/whats-new/continuity/
    Essentially, it allows you to use your iPhone cellular connection on all of your iOS8 devices: iPhone, iPad, Mac computers with Yosemite.  On some devices the call will look like it is coming through FaceTime, but likely on your wife's iPhone it just looked like a regular call.
    Since your iPhone was "hosting" the phone call through it's own cellular connection, you were able to pick it up after your wife answered, which caused your wife's phone to disconnect.  This is called Handoff and is also a feature of iOS8.
    You can turn off Continuity if you'd like, but you could also look into getting your wife her own Apple ID.  I'm guessing you were sharing one so that you didn't have to make purchases twice.  Also in iOS8, there is a feature called Family Sharing which allows you to link multiple Apple IDs and share purchases (among other things).
    In regards to the group text message issue, as far as I can tell, splitting group messages is NOT a feature.   I agree that there should be an answer to this already!

  • Create multiple copies of a position- HCM Processes and Forms

    Hi Experts,
    Hope all are doing well.
    In my current project we using HCM PnF to create positions and copy positions. We are using the FPM interface.
    One of the requirements is to for copy position and the user can create multiple copies(max upto 30) of a position.
    How can this be achieved in HCM PnF?
    One answer will be advanced generic service. Do we have any other way of achieving this? If not, do we have any sample code where we use advance generic service to call SAP_PD/ or any code which might be helpful?
    Waiting for you answers.
    Thanks very much in advance.
    Regards,
    Saikat

    Hi Kalyan,
    Thanks for your reply.
    Yes, I understand that we will have to achieve that through advanced generic service.
    To be honest I haven't used advanced generic service for PD before and it will be helpful if you can give me some code(may be the one inside do operations and flush). With some sample code it will be easier for me.
    Many thanks.
    Saikat

  • Create Multiple Copies of a Field - Mac

    I'm trying to make multiple copies of a field using DC on a Mac. The directions/support indicate that I should "right click" on the field - which, of course, cannot be done on a Mac. So how do I create multiple copies of a field on a Mac?
    In general, all of the directions for creating forms assume I am on a PC. Where/How do I find directions for creating forms with DC on a Mac?
    Thanks,
    Lawrence

    Hi Lawrence,
    Please let me know the os version and hardware model of your mac.
    Please refer this link, it 'might' help with your mac right click issue - http://www.wikihow.com/Right-Click-on-a-Mac
    I have replicated this issue for you on my mac, please refer the below screenshot and let me know if you still face a challenge.
    and this would lead to the following window :
    Now does this helps? Please feel free if you still have any question.
    Regards,
    Rahul

  • Is it possible to update iphone using IOS 4.2.1. to ios 5 or 6

    hey guys am trying to download applications like whatsapp on my iphone or games like  c andy crush but am not being able as its saying that its not compatible with this iphone so i was wonderibg that if its possible to upgrade my iphone using ios 4.2.1 to an ios 5 or 6. when am trying to do this on itunes its saying that my phone is already updated with its latest version. so can anyone help me out. thanks

    If you really have iphone 3gs, then you can update it further.
    If you have an iphone 3g, then you cannot.
    Identifying iPhone models - Apple Support

  • How to create multiple copies of a file with renamed filenames

    hi,
     I want to create multiple copes of a  file [ say abc.docx] which has 3.5 MB of size  and want to rename it through power shell.
    so, in the end, i want to get abc_1.docx,abc_2.docx, abc_3.docx ....abc_10.docx in the same folder with the same size. i mean, after running the ps script i should get the foldwer size set to 35 MB .
    can anyone help, how to achieve this?
    I am newbie in powershell. 
    i tried the below :
    $File = Get-ChildItem -Path "D:\ABCFolder\" -Filter Copying.bat -Recurse
    for($i = 0; $i -lt $File.Count; $i++)
    Copy-Item $File[$i].FullName ("D:\ABCFolder\" + $File[$i].BaseName + $i +".doc")
    help is appreciated!

    but the below one didnt work:
    $File = Get-ChildItem -Path "D:\ABCFolder\" -Filter Copying.Bat -Recurse
    for($i = 0; $i -lt $File.Count; $i++)
    1..10 | Copy-Item $File[$i].FullName "$($File[$I].DirectoryName)\$($File[$i].BaseName)_$_$($File[$i].Extension)"
    am getting the below erro when executing this code:
    $File = Get-ChildItem -Path "D:\mfolder\"
    $count = $file.Count
    for ($x = 0; $x -lt $count; $x++)
    $ext = $file[$x].Extension$name = $file[$x].BaseName
    for($i = 0; $i -lt 100; $i++)
    Copy-Item $File[$x].FullName -destination "D:\mfolder\$name_$i$ext"
    /////////////////////////////error below://///////
    At D:\mfolder\createcopies2.ps1:7 char:27
    + $ext = $file[$x].Extension$name = $file[$x].BaseName
    + ~~~~~
    Unexpected token '$name' in expression or statement.
    + CategoryInfo : ParserError: (:) [], ParseException
    + FullyQualifiedErrorId : UnexpectedToken

  • I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will a

    I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.

    I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.

  • Add Folder to library taking a long time and creating multiple copies

    I have been a longtime WMP user and am ready to convert to iTunes. I am trying to "add folder to library", which causes a request to convert the files I already have (approx 5,000 songs).
    It has been running for more than two days, day and night, working on this. I am not kidding!
    I discovered that it has been creating multiple copies of the songs. It looks like it has restarted a few times, perhaps each time it restarts a new copy is made and placed in the iTunes folder.
    Should it take this long? What can I do to resolve the speed issue and to eliminate all the duplicate files?
    Please help.
    Thanks
    -medicnick

    Theoretically, "Add Folder to Library" goes thru the folder and all its subfolders, and adds each song that it finds that is not already in the library. Optionally, it will make a copy of each song and deposit it in the iTunes Music Folder according to Album and Artist.
    Personally, I have never seen it behave any different. But it is often reported on this forum that on large adds (and at 5000 yours is large) it does not behave properly.
    Since your iTunes library is new, and does not yet contain those precious play counts, why not just delete it and re-add the songs in small batches. You may wish to deselect the "Copy Files to iTunes Folder When Adding to Library" option in Edit > Preferences > Advanced > General.

  • HT201210 Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is do

    Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
    Thanks
    Roger

    Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
    Thanks
    Roger
    [email protected]

  • I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. What should i do?

    I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. I have tried enable and disable restriction, connecting my phone to my laptop and sync from my computer and none of them is working. What should i do?

    Often when this type of thing occurs with missing default apps it is due to a situation where you are unable to 'see' the apps. If you will go to your front display of your device go to settings>General>Reset>Reset Home Screen layout.
    This reset allows for your apps that have for whatever reason been hidden in such an area as you arn't able to find them now to be returned to the area as which they were when you first had the device.
    As far as the missing Apps that were purchased through the Apps Store if you will go to settings>itunes and Apps store and click where it reads about automatcally downloading apps clicking on the toggle switch AND clicking on the toggle switch which allows for cellular data to be enabled this then will effectively automatically download all apps to your device that was purchased from the App Store.
    Good luck friend.

  • I use a PC for work and link it to Office 365. I also have an iphone and ipad. How do I synchronise these devices to Outlook without creating multiple copies of calendars?

    I use my PC for work (MS Office and Outlook). I also use Office 365. I also have an iPhone and iPad. I'm having difficulty getting Outlook to synchronise with Apple devices. I keep getting multiple copies of calendars and not being able to see contacts. Is there a process anywhere which describes the best way to manage these devices together? Or should I just give up on the PC and buy a MacBook or Air.

    Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
    However, the GUI does not change unless the user enters "about:config" and changes the locale.
    Is there a way to do this from the command line? I mean, changing the locale settings.
    And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

  • Create multiple copies with multiple develop settings in one keystroke (like PS action)?

    Hi,
    I'm trying to move over from PS to LR in my tourist photo studio (it's easier to train employees, it's more intuitive, it's cheaper, etc.). However, there is one element missing that I simply can't do without. We're located in a theme park and we handle A LOT of people in a day so we're are a very fast paced studio, I like to call it fast food photography. Customers come in, have their photos taken, pick them out immediately and get prints right away (hopefully all in less than half an hour). I've always used Photoshop actions to make everything very fast and efficient (afterall, the less time we spend tinkering on a computer the more time we can spend interacting with our guests). As of now, customers get to pick the finish of their photo so I have an action that creates four layers, each with a different effect (b&w, antique, desaturated, full color). We then can click the layers on and off to show the customer what each finish looks like. I've been trying to replicate this in LR without any luck. The best I can figure out is to use virtual copies and create a preset for each effect. However, we simply don't have the time to click "create virtual copy" three times in succession then select each one and apply a different preset to create the four effects for one image. Esepcially since each customer usually buys multiple images we'd have to do that many times for just one sitting. It seems simple in theory, but the amount of time it takes to create 3-18+ virtual copies each with different presets applied adds up drastically. Clicking a function key for each image is an amazing time saver. The focus of our business is very customer oriented, and we've tried our best to create a workflow where we face our guests more than we face our computer monitors. If anyone knows of anyway to accomplish what I described in PS in an equally efficient manner in LR that would be wonderful. Perhaps there's a tactic I haven't thought of yet.

    What you describe cannot be done directly in Lr, i.e. there is - unfortunately - no way to create multiple Virtual Copies (VC) with one command.
    But in Lr you don't need multiple VCs. If you have created presets for each "look" you can just apply one "look", i.e one preset after the other the one-and-the-same VC. And you can apply the "looks" i.e. presets in any order and go back-and-forth numerous times. Since the Lr edits are not pixel edits but parametric (only a set of data in the Lr database = catalog), there is no harm done if you apply the same set of presets numerous times in various order. In Photoshop you would switch layers on and off (maybe you use layer comps), in Lr you would switch from one preset to the other for the same VC - or even for the original.
    And, you can always go back to the original state the photo was in when it was imported.
    If the customer likes one preset, just switch over to the Print Module, apply your Print Preset and print. If the customer likes three presets, go back to the Develop Module click on the other preset, go back to the Print Module ... go back to the Develop Module, click on the third preset .... etc.
    PS: I bet Lr could be even faster than Photoshop
    Message was edited by: web-weaver: PS added

  • How to create multiple copies of the same mailing label?

    I know how to create mailing labels for addresses in my address book. How do I print an entire sheet of the same address on a page of mailing labels? The preview when I select 20 copies of one address label does not show the same label on multiple times on the page, only once. Does that mean it will only print one label per page for a total of 20 pages or does it only show one since they will all print the same?
    I'd like to use this to create custom return address labels

    It's tedious but you can create a new group in Address Book, make 20 entries (or however many entries would make one label page's worth) for your own name and print just that group.
    Avery has free software that I believe does what you want but I haven't used it. Comments on the download page indicate the Avery software lacks on directions.
    http://www.avery.com/avery/en_us/Templates-%26-Software/Software/Avery-DesignPro -for-Mac.htm?N=4294967076&refchannel=3980ac83ae70a110VgnVCM1000002118140aRCRD

  • How can I pass value in status and reason for rejection using BAPI_LEAD_CREATEMULTI when creating multiple lead

    Hello,
    I want pass value in STATUS and Reason for rejection according to requirement when i am creating multiple lead using BAPI_LEAD_CREATEMULTI. Please help me how can i pass value. Please give some sample code that in which table i have to pass values and please also tell me INPUT_FIELDS values. Please help me
    Regards,
    Kshitij Rathore

    Hello,
    Please help me for solve this problem. I am trying to solve problem from last 4 days but i didn't get any solution.
    Regards,
    Kshitij Rathore

  • PLEASE HELP!! I've used iWeb to create multiple sites, all published to third party servers.  The very last site I made changes to is showing up in any domain file I open - despite their different names and locations on my iMac.  I just switched to Lion.

    Please HELP!!  I just switched to Lion.  I have created multiple websites using iWeb  3.0.4 and despite my having saved their 'domain' files in various locations and using different filenames, upon opening the domain files I keep getting the very last site I published.  All the sites were published to third party servers.  The domain files (still have a preview that look correct and have different file sizes) but keep going back to the last site published. HELP ME PLEASE!! Are the old files still available?!!

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

Maybe you are looking for