My iPhone 4 went black- tried to connect to my mac- but it is dead!!

my iPhone 4 went black- tried to connect to my mac- but it is dead!!
and nothing has happened- no water- no dropp

Did you run it completely out of battery? If so it might take up to ten minutes for it to come back to life and look like it is charging. Keep it on the charger for at least an hour before trying to sync back to the computer.

Similar Messages

  • My iphone went black and will not turn on past the apple logo

    iphone went black and wont turn on past apple logo

    Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
    If this does not work, connect in recovery mode and restore, explained here:
    If you can't update or restore your iOS device

  • I just got an iphone and am trying to connect it to my itunes account.  Getting the message " This iphone cannot be used because the Apple Mobile Device service is not started.  How do I start it?  Have already been back to the store with it and no change

    I just got an iphone and am trying to connect it to my itunes account.  Getting the message " This iphone cannot be used because the Apple Mobile Device service is not started.  How do I start it?  Have already been back to the store with it and no change.

    http://tinyurl.com/3hs3g2u

  • HT2978 my iphone went black and it will not come back even after i held the two bottons for over a min

    my iphone went black and it will not come back on even after i held the botons down for a min

    Hey dodie67,
    Thanks for the question. Sounds like your iPhone stopped responding to buttons, switches, or touchscreen input, so you'd want to go through the troubleshooting steps in the following article and see if that resolves the issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Take care,
    David

  • HT4993 iphone went black wont turn back on

    iphone went black wont turn on even plugged into charger

    Reset it by pressing and holding the home and power buttons until the white Apple logo appears.
    No data will be affected.

  • I m new t o iphone community , i tried to connect with itunes with my laptop, finally i did transfer my songs and movies to itunes but it is not showing in my iphone . plwease help me

    i m new t o iphone community , i tried to connect with itunes with my laptop, finally i did transfer my songs and movies to itunes but it is not showing in my iphone . plwease help me

    You need to sync your phone with iTunes on your PC. Read this article
    http://www.apple.com/uk/support/iphone/syncing/

  • My iPhone went black and is now not responsive. What can I do?

    My iPhone went black and is unresponsive. It was working and then black. How do I fix it?

    Press and hold sleep/wake up button on top along with home button for over 10 seconds till Apple logo appears.

  • I turned my safari off and iphone went black how do i fix this

    i turned my safari off and iphone went black how do i fix this

    Hi there sbrianbald,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • My iPhone went black and the hold the power and home button solution will not work

    My iPhone went black and the hold the power and home button solution will not work

    Make sure it's charged.
    Try to Reset your device:
        Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • My iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to ios8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to itunes(asus eee pc) What do i do?

    my iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to iOS8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to iTunes(Asus Eee pc) What do i do? please help me.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    And as necessary:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My iphone 3g have earlier had connection to Wi-Fi,but now it can`t connect with Wi-Fi. Why?

    My Iphone 3g have earlier had connection to Wi-Fi, but now it can`t connect.Why? If you can help I`m very grateful because i have tried alot of things and can`t find out?

    We have try to reset the phone and a new programware. We tried to connect it with differrent Wi-Fi.The trouble is that when we write the password - we get the answer that the password is wrong. And this has worked before.And another wi-fi tells us that it can`t connect.

  • Hi I am trying to connect a new mac to an existing time capsule but Airport Utility is just not picking it up. What am I missing?

    I have tried to connect the new mac to an existing time capsule both directly through ethernet and through wifi. Both times I get Internet connection OK but Airport Utility is stuck searching for the base station. I have two existing macs which are connected fine and have both been backing up quite happily. The first two macs are the same user (me) and the new one is for a different user in the house. All the macs are running Mavericks.
    I have tried rebooting the time capsule and the new mac - didn't help.
    Any information as to what I can try would be most welcome.
    Many thanks

    Hi All
    I have solved my problem! It was the old chestnut the firewall issue. We have McAfee firewalls on our machines and the wifi network was set up as a public rather than a home network. I changed it to Home or Work and het presto the time capsule appeared. I didn't have this problem with the other machines at all.
    I hope this helps someone!!

  • I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

    I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

    Have you rebooted your home router?

  • I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

    i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8  I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

    I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 
    I have downloaded the latest UFR II driver. (UK Version)
    I am trying to connect to the printer but the printer is not  appearing in my Print/Fax Preferences.
    When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
    Is there a problem with my Mac setup or maybe a setting in my printer?

    Mac UFR II Printmonitor
    UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
    MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
    Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
    Other Printers:
    Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

Maybe you are looking for

  • Mixed Mac & PC PCs no longer showing up in "shared"cant add windows printer

    Hi all, I have noticed that none of the PCs on my network at work are showing up in finder under the 'shared' section, hasnt really been a big deal, i have shortcuts to all the network folders/printers i need to access (main printer is shared from a

  • Using RMBP in clamshell mode w/ Remote App music stops

    Hi, I've got my MacBook Pro connected to the internal DAC in my Peachtree Audio nova125 integrated stereo amplifier via USB. This allows me play music in iTunes on my MacBook Pro via my stereo speakers. Excellent, but there's a problem... I keep the

  • How to prepare 5.1 Surround Ready DVD?

    Hello, I already have an AC3 audio 5.1 surround ready created with Premiere Pro's SurCode Dolby Digital 5.1 surround settings with an MPEG2 ready video in my Encore project. When I go under the "Edit Quality Presets" menu in Encore, It shows me the p

  • Creation Of Account groups and Ledgers under chart of a/c's

    Hi all, I m fresh SAP candidate... Just finished one cycle of practice...next cycle i want to create ledger by own... is this possible to create other than coping the chart of a/c's... what abt the tables...is there any seprate methods to copy tables

  • Same Artist Name Displayed Twice In iPod Menu.

    Lately if I put 1 or 2 songs in my itunes by the same artist but it's not bought off itunes the artist name will show up twice on my ipod. I have the latest itunes and everything is spelled correctly. PLEASE HELP!