My iphone 4 when playing music suddenly stops.

When playing music on my iphone the music randomly stops as the volume slider image disappears as the song is playing. What to do?

try doing a reset all settings!

Similar Messages

  • When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes.  After a few minutes, it starts to play again.  I hear a click and the apple logo shows on the screen.  Any ideas??

    When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes.  After a few minutes, it starts to play again.  I hear a click and the apple logo shows on the screen.  Any ideas??

    You may need to do a Restore in iTunes.
    Clicking sounds from an iPod that has a hard drive is probably not a good thing.  It is possible that your iPod's hard drive is becoming unreliable.

  • Can smbody please tell me what to do to my iPhone 4s, when playing music or ringer, the sound will just stop without stop it.. I am really getting tired of this...

    Can smbody please tell me what to do to my iPhone 4s, when playing music or ringer, the sound will just stop without stop it.. I am really getting tired of this...

    After updating to iOS6, I lost all sound for apps like YouTube, Netflix, games, and even notifications. The only time sound worked was during a phone call or when the head set was plugged in.
    I did a full back up and restore- sound restored but only for a day before the problem returned.
    Called Apple Support and was advised to do another restore, but this time restore it as NEW first, then do the restore from back up.
    Seemed to do the trick.
    Here are the instructions of what I was given- hopefully this will help you too:
    Here is a link about backing up your iPhone with iTunes.
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    Once you back up your device you will want to restore it.
    You will need to have iTunes open on your computer screen.
    Please turn your iPhone off.
    Press and hold the Home Button.
    Continue to hold the Home Button as you plug you iPhone in to the usb cable.
    You will want to continue to hold the Home button until you get a screen with the message "device found in recovery mode".
    Please follow the prompts and restore device as NEW.
    once the restore is done you will have to set up the device and test the sound.
    If it works you will then need to restore the device from the back up to restore your user settings.
    You can find the instructions how to restore from back up also from the the link I provided.

  • The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

  • The sound on my iPhone 4S cuts out when playing music/podcasts.

    The sound on my iPhone 4S cuts out when playing music/podcasts.  If I unplug and replug in the headphones, the sound comes back on, but often for only 20 seconds or so before cutting out again.  Sometimes it will play for 15-20minutes before cutting out.  The track is not "paused", and appears to continue, just no sound.  I tried cleaning the headphone jack with compressed air to no avail.  I also noticed the the same phenomenon occurs when I sync my bluetooth to my car audio.  That is, it will play for a while, then the sound will cut out, even though the track is still shown to be playing.  If I reset the bluetooth, the sound comes back on.
    This started happening about a week ago, but no "event" that I can think of caused it.  I didnt' get the phone wet, forcefully drop it, or leave it in extreme heat.  I've tried doing a reset of the phone.  I also was running iOS5 when I first noticed this, and since upgraded to iOS6.  The problem appeared with both.
    Any help would be greatly appreciated.
    Thanks,
    Steve

    One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone.  I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner.  An Apple employee told me that the pins on the phone had a little corrosion and sand.  The problem hasn't gone away completely, but has been significantly reduced.  I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

  • Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

    pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

    Dear Valued Pioneer Customer:
    We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device.  If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
    This firmware update may be used only with the following 2012 Pioneer products:
    CD Receivers
    DVD Receivers
    DEH-P8400BH
    DEH-P9400BH
    DEH-80PRS
    AVH-P2400BT
    AVH-P3400BH
    AVH-P4400BH
    AVH-P8400BH
    In order to perform this update, the following items are needed:
    A Pioneer CD or DVD Receiver above with built-in Bluetooth
    Laptop with built-in Bluetooth running Windows® 7
    Bluetooth firmware update (HW05-SW01.27.20)
    How to Obtain the Free Firmware Update
    1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
    2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
    You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
    How to Determine if the Firware Update has Already been Installed
    CD Receivers:
    • With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
    DVD Receivers:
    • With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
    If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
    Questions
    If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
    Sincerely,
    Pioneer Electronics (USA) Inc.

  • TS1702 Iphone 4s io6.1 no audio when playing music and movies

    Iphone 4s io6.1 no audio when playing music and movies?

    Clean the dock connector and headphone jack.  Lint or debris in either of this could cause this issue.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • My iPhone 4 has no sound when playing music or videos-help please?!

    Hi - my phone has stopped having any sound when playing music or videos, no volume bar either. No key noises either - but I can live without those!! I can hear sound through headphones, though sometimes that's intermittent. I have tried cleaning ports, restarting it, restoring it, pressing right hand corner of screen, taking headphones in and out repeatedly, pressing speaker twice whilst making call, blowing air into charging port, flicking volume switch on and off on side etc yet nothing has worked. Please can anyone else help? Apple want £135 plus vat to service it which isn't worth it in my opinion!

    Is the mute switch on?
    Is Do Not Disturb mode enabled?

  • I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    Sorry if this is too basic or confusing
    Apparently in iOS 8 there are different volume settings for different applications
    The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
    So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
    Please let us know what happens
    Thanks

  • Phone plays music but stops when I plug in my earphones.  Have tried multiple earphones and the same results.  Any ideas?

    phone plays music but stops when I plus in my earphones.  Have tried multiple earphones.  Any ideas?

    I can't see anything in there and took a toothpick to see if there was
    something stuck but no luck.
    On Sun, Nov 17, 2013 at 1:19 PM, Verizon Wireless Customer Support <

  • My iPhone 4 plays music at a low volume when connected to a car stereo

    My iPhone 4 plays music at a low volume when connected to a car stereo either by fm transmitter or aux cable. The volume on the phone is full and the car stereo is full yet you can barely hear it. Anyone else had issues with this

    I seem to remember someone several months ago having this same problem and I think it turned out to be the AUX cord.
    FM transmitters tend to have low volume associated with them as well from my experience.

  • When playing music on my iPhone 4S, it keeps repeating the same song, even though it is set at Shuffle.

    When playing music on my iPhone 4S, it keeps repeating the same song, even though it is set at Shuffle.

    Make sure you don't have Repeat turned on.  While the song is playing, tap the screen (cover art) if necessary to bring up the extended music controls (see image below).  Then tap the Repeat button until it turns white (which is off).

  • No sound when playing music iPhone 4s and not charging right on some chargers.

    No sound when Playing music on iPhone 4s and issues charging on some chargers. This below worked for me - Thanks.
    No sound only when playing music. 2013 11:05 PM.  My wife had the same issue with her iPhone 4.  The volume bar was grey inside the music app and the volume buttons on side of phone didn't work.  Cleaned out the charging port using rubbing achoal and a Q-Tip.

    Hi
    I have the same problem. iPhone 4S with newest update. No sound while playing music (grey volume buttons). No sound for alerts e.g. incoming SMS.
    Total reset does not help. Restore from iTunes Backup helps, but sound only available for some minutes (can play music direct form iPhone, without ear-phone)
    Issues is still open. All contact cleaned (ear-phone etc.)
    Please help.
    With kind regards,
    Swiss JFK

  • No sound when playing music and video on the new iphone 3gs (32gb)

    I have a problem with no sound when playing music or watching video both on the ipod part of the phone and when watching youtube videos, all other sounds are working fine on the phone(eg Apps, phone calls/rings and system sounds. If i reset the phone everything apears to work fine again for the first minute or so but when i stop a video or tune for a second and try going back to it, the sound is gone again. All settings are fine. Anyone having the same problem or any idea how to fix it?
    Thanks

    You could try either a Backup Restore or a Clean Restore. I usually do a CR with MobileMe as the restore source. Afterwards I reload the music, videos and apps.
    It could be a sound playing bug like the Bluetooth bug that bites me now and then (audio stops and goes once in a while, audio gaps in the video if the video is paused, and videos recorded have the audio very quiet).

  • When playing music itunes pops out every 30 s on the forefront. It drives me crazy as I can't surf, write on word or do anything else while listenning music without being constantly interrupted. How can I stop it ?

    When playing music itunes pops out every 30 s on the forefront. It drives me crazy as I can't surf, write on word or do anything else while listenning music without being constantly interrupted. How can I stop it ?

    Do you have Logitech Gaming Software installed?  If so, uninstall it and see if it resolves the issue.

Maybe you are looking for

  • BI 7.0 data load issue: InfoPackage can only load data to PSA?

    BI 7.0 backend extraction gurus, We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.  Af

  • Want to use multiply iPods on 1 PC

    My wife and I have our own iPods (and music collections that we do not want to mix). I have been using mine on my laptop, but the hard drive crashed and I lost all my music on the laptop (but still have all the music on my iPod). Two questions: 1) Is

  • G-drive not recognized by Finder or Disk Utility

    I've been using this G-drive for almost a year now and have never had any issues. Today I just tried to use it to move some files off of my Macbook Air and not only would it not appear in Finder, but it doesn't appear in Disk Utility either. I've spe

  • Process terminates in process chain

    Hi , I do have 7 Meta Chains running under one of the Process parallely in BI 7.0. Unfortunately once in a while some of the process are terminating. Its start at the same time as all other of the process, but it does not executes the chain and turns

  • SAP BW on ECC 6.0

    Hi, Is that possible to activate the BW in a SAP ECC 6.0 with all SAP_BW Support Packages? I kwon that i have to user transaction RSA1 in client 001 but my problem is how to use this transaction. Does any one have a document that i can follow. Thanks