My iphone 4 will not update to the latest firmware. How can I fix this?

My iphone 4 will not load the latest firmware. it keeps timing out. How can I fix this? I am using Windows 7.

Disable all Anti-Virus software & Firewalls & try again.

Similar Messages

  • Firefox gives me an error and will not connect to the internet. How can I fix this?

    I have uninstalled and reinstalled but Firefox will still not connect. It gives me the inital start error message of "not being able to connect" etc. I am able to use IE and there is no connectivity issues at all. How do I fix this? I really prefer Firfox!

    AHA!!! I had the same problem with no answer so I started doing some research. Apparently people with McAfee and Norton were having similar problems so I started there. I opened my McAfee and went into the Web and Email Protection. Click on Firewalls; click on Program Permissions. Scroll down to find Firefox. If you're having the same problem I did, it will say blocked. Change to allow. That should solve it!! I wonder if MS paid McAfee!!?? Hope it helps!

  • HT1430 The Wi-Fi and Bluetooth on IPhone 4s will not toggle on or off.  How do I fix this?

    The Wi-Fi and Bluetooth on IPhone 4s will not toggle on or off.  How do I fix this?

    http://support.apple.com/kb/TS1559

  • ITunes / AppStore problem: I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    credit card it tells me my credit card is not valid for the store.
    Hi Don ...
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    The iTunes and Mac App Store are one in the same.
    And check out this support article here   >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • HT4623 I have a new i4 phone and am new to Apple. My imessaging will not send out any messages. How can I fix this

    I have a new i4 phone and am new to Apple. My imessaging will not send out any messages. How can I fix this? HELP

    about message http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755
    settings - message - imessage - is turned ON?  Do you have it activated?
    Make sure you have a good wifi or cellular data connection.
    Also you can only imessage other apple products who have imessage on.

  • Some songs I purchased on iTunes will not sync on my iPhone5. How can I fix this?

    Several songs I've purchased from iTunes will not play on my iPhone, even when I have the checked to sync.  How can I fix this? Thanks.

    Here's a screenshot... it attempts to pull form iCloud but fails... so then moves to the next song after a couple seconds.. other songs that are failing do same.
    Btw, tried deleting all copies form iTunes and iPhone then re-downloading... no love. Same issue (exact same incorrect artwork)!

  • Video streaming from iPhone to Apple TV only plays the sound.  How can I fix this?

    Video Streaming using AirPlay from iPhone(5s) to Apple TV only plays the sound.   The TV screen goes blank when I choose AirPlay but only the sound plays.   How can I fix this?

    Is this using a specific app or apps?  Not all apps support video out over AirPlay, the option is up to the app developer.

  • When I try to burn a play list to a CD some of the songs are grayed out and then not burned to the disc. How can I fix this problem?

    why are some of the songs on the play list I am trying to burn to a CD "grayed out" when I start burning the CD and there for not included in the finished CD? How can I fix this problem. Btw, I have been using iTunes for years and this problem just came up quite recently. Thanks

    Howdy sarthur,
    Thanks for using the Apple Support Communities.
    To help resolve this issue where you're unable to burn a disc successfully in iTunes, please follow the troubleshooting in the article linked to below.
    Can't burn a CD in iTunes for Windows - Apple Support
    Take care,
    Alex H.

  • I have the software stating it is Mac OS x I don't have iMessage. I would like to update to the latest software, How can I do this?

    I just realised I dont have imessage. I have ichat. I have the old operating system of Mac OS x. I was wondering how I can update to the latest mac software? As I searched it upon the app store and I am unable to find it. Please help?!

    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks- System Requirements
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • My iPhone 4 will not update to the latest iPhone Software.

    I plug my phone into my computer and checked it for updates and there was one available for the latest iPhone Software. It will begin downloading and take about 15-20 minutes to complete the downloading but once it gets to the end where it begins to install, it says there is a connection error. I know there isn't a connection error and my computer is clearly connected to the internet so I don't know what to do. I have tried this three or four times and get the same problems each time. The only thing I know to do is to go out and buy a different phone and get rid of my iPhone....Help please since I happen to be the typical broke college student and buying a phone outright isn't the best option right now.
    Thanks

    This is a common error.  A search of google or the forums would have revealed the answer in less time than it took to register and post.
    Temporarily disable any Anti-Virus or Firewall software on the computer, run the update, then re-enable the software.

  • My iPhone will not synch due to error 1140, how can I fix this?

    How can I connect my iPhone to my Mac computer without error? Error 1140 keeps appearing

    Download and install the iPhoto 9.4.1 update, which was just released today. It may be the answer to your problems:
    http://support.apple.com/kb/DL1598

  • HT3258 The scanner on my Canon inkjet printer MG6200 series will not work with Mountain Lion. How can I fix this?

    The MP Navigator software in my scanner cannot be opened since I installed Mountain Lion. Canon say they don't have a way of fixing this, so is there a solution out there I wonder?

    I have the MG6250 and MP Navigator v5.0.2 is working on my 10.8.2 Mac, so I don't know why the Canon support is telling you that it cannot be fixed.
    To use MP Navigator you must have the full scanner driver installed. And when it is installed you then need to configure MP Navigator to use the networked MG62xx.
    Also ensure you are using the latest version of MP Navigator. Try trashing the one you currently have in Applications > Canon Utilities and then installing this latest version.

  • Certain websites will load eg. Facebook, Google, etc. but others, eg. YouTube will not open. Why? And how can I fix this?

    Firstly, I downloaded the latest edition of Firefox. It then crashed several times in a row. This is when certain websites stopped responding and refused to open. I don't know what the criteria are for which websites open and which do not as I have no problems with sites such as Facebook, Google, etc. yet sites such as Youtube won't open.
    Also, If I search for something on Google, once it returns results, I cannot open certain websites from the links given to me by Google.
    Eg. if I search Google for Musicnotes.com, I can click the link and the page will open. But if I search for my university website, the page won't open.
    When I closed Firefox and went to reopen it, all I got was the "send error report" screen several times over. If I clicked "Close" or "Restart" Firefox, nothing would happen, it just returned me to the "send error report" screen. I then restarted Firefox in safemode as well as restarting it without add-ons. But I am having the same problems with opening websites.
    What can I do?

    Do a malware check with several malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.<br>
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • IMovie will not open after ram upgrade. How can I fix this?

    I updated the ram on my computer by myself from 2gb to 4gb. Everything seemed to work fine, yet when I go to open imovie, it will not open after endlessly bouncing on my dock. I have verified disk permissions. Repaired disk Permissions. Tried replacing iMovie with the iMovie backup from my time machine. Cleared the system cache. Tried reinstalling it using the ilife 11 disk. Tried installing the previous ilife 09 version. Reinstalled snow leopard and did a time machine back up. Placed the old ram back in the computer. All this things done with no success.
    DOES SOMEBODY HAVE ANY IDEA ON WHAT I COULD DO?
    regards
    Lloyd

    Hi
    My first two thoughts
    • Faulty RAM - There are programs that can test this as Tech-tools (buy or in Apple Care pac)
    • Wrongly inserted RAM - Can be tricky and sometime not obvious - everything's looks OK but in certain situations it just randomly don't work.
    Take out the new RAM and try Your Mac without it to see that it's still OK to start with and then very carefully re-install RAM and now be very careful to see that it snaps in exactly as it's intended to.
    Yours Bengt W

  • Installed 5.0 on my Windows PC and it will not access websites. I reconfigured the firewall and it did not help. I can go to a website but it will not allow me to login. How can I fix this?

    I updated to 5.0, added webmail adblocker and adblocker, and it would not work at all. I uninstalled, and reinstalled without the addons and it still did not work. Troubleshooting said to remove from firewall settings and re-add, which I did, but Norton Security Suite will only do "allow" and not "Auto". I can now access a page to a website, but can't log in (ie: yahoo mail, facebook, etc.)

    I have clicked on the  connect button, but it brings up the same There is a problem connecting,  and I have also tried SMB://
    i tried pinging the ip address with in termial and it times out.  
    From my windows PC and I can access my MacBook Air just fine,

Maybe you are looking for

  • Trying to open PowerView on SharePoint 2013 throws an error

    Hello, I am having some serious issues with a vanilla install of SharePoint 2013 in a dev environment. SQL and SharePoint are in different servers. I installed PowerPivot in the SQL Server, then I proceeded to run the PowerPivot configurator in the S

  • How to enable reading 4GB Ridata SDHC card on T61 7663-BC2 with Ricoh R5C476 controller

    Folks, I have searched and searched but nothing works from the given driver updates Pls help

  • Web Item Analysis Moodule in BI7 - How to Activate

    Samples provided by SAP for Web Item Analysis Modification are 4) Negative Number module (com.sap.ip.bi.rig.NegativeNumber) Depicts negative numbers in a column or entire table in red. Hi SDN Community, I have recently been exposed to Web Interface i

  • Reg..csv file as input parameter in sqlloader

    Hi, I have .ctl file. every time i received the file name in diff name. rather than hardcode file name i wants to take .csv file as input parameter plesase do help in this. here is the code.. OPTIONS (SKIP = 1, BINDSIZE=100000) LOAD DATA CHARACTERSET

  • ERROR IN WEB LOGIC AND JBUILDER...

    hi, im just new to weblogic with JBuilder X, i made a very basic session bean and when i compiled it. it said... "WebLogicSesMod.jar": Spaces in the temporary directory path may cause WebLogic APPC utility to produce fatal compile errors. im using We