My iphone 4 with latest software update has a problem with bluetooth. It continually searches for other devices without showing any other bluetooth devices
I have an iphone 4 with latest software update. When entering the settings for bluetooth it continues to search for devices. It does not highlight any device, just continuous searching
Hello:
What are you trying to do? If you do not wish to connect to other BT devices, turn BT off.
Barry
Similar Messages
-
4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
Problem with latest software update
Hi I've ran the latest software update for my iPhone 4S but now it's running really slow has anyone else had this problem ?. I'm at home while writing this so connected to home wifi but still took me at lest 5 min to do this.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
More Tips here...
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now Never use. -
Latest Software update has shut down my mac - cant boot it up anymore
can anybody shed any light on this issue - i have just (stupidly) run the latest software update (about an hour ago) and now my macbook pro wont boot past the grey screen, it restarted the 1st time but no softwarew would work- then i restarted and now it wont get past the greay screen with the apple on and spinning wheel- ive tried booting of the install cd (it just spits out the cd)- safe booting, reseting the pram -and am now considering throwing it out of the window as i have deadline and have run out of idea's - it may have got dangerously low on disk space around the update - but it looked like it had at least a gig on it can anyone PLEASE help....
Hi exit23, and a warm welcome to the forums!
Unfortunately I've read of this happening before, it's usually Disk or OS corruption that leads to it.
And iGB free space is nothing these days, definitely dangerous territory, less the 10 GB is really slowing OSX down to a crawl.
Apparently you don't have a bootable backup!?
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
But you'll likely have to clear some space ASAP.
Do you have another Mac and both with Firewire? -
Problems with latest software update - release 10.1.0.2019
I have two problems that were not there with the previous software update.
1), I can no longer open attachments. The error message reads: cannot create a temp file for the specified attachment.
2) can no longer open text messages - no error messages just won't open
Help!Backup first and use BlackBerry Link to reload your OS. After reloading, do not restore your data. See if still occured.
Thanks and good luck!
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution" -
System not moving out of software update.
OSX Mavericks is so riddled with bugs, it's extremely frustrating.
I made the mistake of upgrading to a new rMBP a few weeks ago (which came with Mavericks) and so far I've experienced
random issues with the machine not waking up from sleep
display output garbled
videos freezing when played in fullscreen on quicktime
applications failing to load, with an error code of -600, as well
I've resorted to rebooting my laptop every time I want to use it, or rebooting every couple of hours, because it seems that Mavericks can't handle more than a couple of hours of runtime without crashing.
Apple, get your *** into gear, fix this crap, and find a new quality control team. -
Apple TV Gen 2 - "sleep shortcut" doesn't work with latest software update.
I used to be able to hold down the "select" button when on the Apple TV home menu, and the box would go to sleep. However, after the last software update, this no longer works. The only way to put the box to sleep is to head through the settings menu. This is annoying and time consuming. Any ideas why the shortcut was disabled? Is there something new? Any plans to fix the "bug"?
YUP..!! Just updated the device and it works fine again... Thank you for your swift reply.. Enjoy your Sunday...
//Jesper -
Hi there,
I have Mac OsX 10.6.8, iTunes 10.5 and iPhone 4 version 5.0; all up to date.
When I try to sync my phone with iTunes, the sync goes well until the apps start to sync .... then iTunes closes and I get varying error reports.
I have tried updating everything (Mac, iTunes, iPhone) to no avail.
I tried restoring the iPhone, that didn't help whatsoever.
Does anyone have a solution? I am now tempted to downgrade to an earlier version of iTunes (ie: 10.4.3) as some people suggest in different posts.
Thank you for your time in replying!
MarmotteThere is definitely a problem with iTunes 10.5 and iOS 5.0 syncing correctly. I've seen lots of workarounds on the forums here. Just search for it and see if you can come up with something that works.
-
Nokia Software Updater has a problem (NSU) Please ...
ive downloaded nsu and its on my computer and it works it tells me to connect it to my pc and i did that but when i click next it comes up with this...
[IMG]http://i150.photobucket.com/albums/s90/da_killer_2007/NSUproblem.jpg[/IMG]
my friend who also has N95 has got an updates version the 2.0.something but i dont understand why it wont let me update my phone someone please help ive been trying for ages.This is normally due to your phone being branded to a network and the update not being approved.
If your phone is branded it may be worth a call to the Network to check.
John32 -
I have just installed HP update PSB210_231.exe . The result is that the HP B210a support software on my Windows 7 Dell PC has suddenly lost a number of facilities including the ability to review the ink levels or to run diagnostics and tests on the printer.
How can I uninstall or can you provide a fix?Hi all,
Make sure to remove the current software by going to Start > All Programs > HP > HP Photosmart B210 > Uninstall..
Then go to Programs and Features and remove any remain item of the printer, any item should beging with HP, as well you may see the Read Iris software..
After uninstalling the software reboot your PC, download and install the updated software version below:
http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-2/PSB210_1315.exe
I believe the problem should be resolved,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Can't open iPhoto with latest software update
I'm running iPhoto 11 on my Mac using OSX 10.9.1 On Dec.12th I updated the iPhoto software to the latest version. When I try to open iPhoto on my Mac I get an alert box saying that I must upgrade to the latest version of iPhoto or I can't open my library.I've rechecked the latest iPhoto software and it says that it's installed. Any ideas ?
Thanks,
BillAs Larry has already pointed out if you had iPhoto 7 before the upgrade you'll need download the iPhoto Library Upgrader 1.1, launch it and run it on your iPhoto library. It will be located in your Applications/Utilities folder. Then iPhoto 9.5.1 will be able to open and use your library.
Happy New Year -
Why does my computer say that the software update has been tampered with and cannot download?
I recently wiped my computer's hard drive and was updating my software when it told me that. What does it mean? Is there anyway to bypass it?
Hello, are you really still on 10.5.6?
Which exact SW or update is this, & do you have a link? -
Latest firmware update and more problems with 30" external displays?
Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update? -
Installed iTunes update 12.2.1(1)
I used to download daily podcast by using the "refresh" click. That is no longer an option. What is the solution?https://discussions.apple.com/message/25796486#25796486
-
Just updated now having problems with wifi, just updated now having problems with wifi
wifi playing up after latest update to lion
I watched a movie file in QuickTime Player and MPlayer but didn't notice any lag. I also watched a video in Hulu Desktop and didn't get any lag either. I believe I have the same 500GB drive as you in terms of exact model number so I'm not sure what's going on other than it's got something to do with the firmware.
At least you're able to use the rest of the machine...unlike most of the others.
Maybe you are looking for
-
No multiple speakers option in Remote for iPad
OK. By searching around here I managed to discover that the speaker selection option on the iPad is actually on the multi task bar (double click home button). But I have now discovered that while the Remote app has the option for multiple speakers on
-
Hello, i have photographed a wedding and i have 650 finished photo's. All came from a 5Dm3 of 5Dm2. All are in raw. The color versions are ready. I have created a preset to convert all 650 edited version to B/W. The key is i will not edit the curve a
-
can use exists instead of IN operator. or is there any optional to that query. please suggest me. lakshman.
-
I'm sure that other organizations have some policy for this. In our case, we want to keep the mailbox available for others to still access, but disable the user account and remove it from OWA. In this case, I've disabled the AD object, disabled OWA f
-
Deleting unwanted words in iPhoto Slideshows
I have learned--finally--to add captions to individual images in my slideshows, but now I want to delete words that I didn't--intentionally--put there.I put six images into a Slideshow I made for training purposes. I added "test 1" for image one, "te