My iPhone 4 won't work with my car adapter but all other iPhones do. What's wrong with mine?

I have an iPhone 4 ad I have a car adapter that says it is compatible with my phone. Every thing else works fine with the adapter. All different kinds of iPods and anyone's iPhone that I try on the adapter works except mine.
Could there e something in my setting that isn't letting my music play? What could it be?? I honestly dot know what it could be.

Could be a problem with the contacts on your iPhone's connector.  Try cleaning the contacts using compressed dry compressed air, blowing on the contacts using your mouth being carefully not to spit, or using a very soft dry brush.

Similar Messages

  • HT4623 hi i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

    hi
    i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

    I switched the usb port and did the whole recovery holding of the buttons ect... And it worked, the computer detected the phone and i was able to click restore. However, the computer says preparing iphone for restore and it is still doing the restarting thing where the apple fades away and then comes back like it is restarting. If i can somehow get past this i will be able to go back to factory settings and resolve my problem, but this is where i am stuck.

  • My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails. What is wrong with it?

    My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?

    well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.

  • When I boot up my Mac, Messages opens automatically. I quit the app, but it just re-opens itself. It won't stay off!!! I can't figure out what's wrong with it!

    For the past few months, my Mac has been acting weird. EVERY time I boot up the computer, Messages opens automaticallly (I am runing OS X 10.8.x). I quit the app, but it just re-opens a few seconds later! It just won't stay off! I've looked it up online and nothing helps. I have no idea what to do!!!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • My iphone 4 is not syncing with my outlook calendar but all other functions such such as conntacts, music etc are syncing fine.  Any suggesstions?

    my iphone 4 will no longer sync my calendar with outlook.  Other functions such as contacts and music sync fine.  Any suggestions?

    I am having the same issue - did you find a resolution yet? I have resorted to completely uninstalling all iTunes related software and will now reinstall to see if the issue is resolved.

  • My iPhone5s vibration was good but suddenly came so weak, what's wrong with my iPhone?

    I know there are a lot of types of vibrations, but I didin't change anything about two monts, and as I said suddenly my vibration gone bad, so weak.
    What is the problem and what to do?

    Take it to Apple or an Apple authorized service provider for evaluation

  • My macbook pro simply won't turn on. The light is dim when charging! What's wrong with it please?

    Hello there
    My macbook turned off the other day and i havent been able to turn it on since
    When charging it, a faint green light comes on but nothing else
    any help would be much appricated!
    thanks

    The folks at the Genius Bar are very good at Power and other Physical problems like this. Your appointment for an evaluation is FREE, in warranty or out.
    Be sure to bring all the equipment you normally use together -- MacBook, Power Adapter, and external drives and mice, if any.

  • My screen keeps going fuzzy but just in one corner. what is wrong with it?

    Please Help! And is it fixable?

    Let the battery fully drain. After charging for at least an hour try here if the iPod acts differetlu
    iOS: Not responding or does not turn on
    If not then time for an appointment at the Genius Bar of an Apple store.

  • What's wrong with my ipod touch 4g?

    Hello, I am a student who is using MacBook Pro and iPod Touch 4G (32GB)
    To jump to the topic, my liquid crystal of my iPod is broken. No, it's better to say, CRASHED.
    I bought a new protecting film and case for my iPod, and i sticked and covered it.
    Suddenly, the top left corner of my iPod just crashed. I was holding the player with my finger, and it just crashed.
    So, what's wrong with my iPod? I'm pretty sure that it was not my fault. All I did was just holding the iPod with my two fingers and trying to fit the case.
    Next, is there going to be any problem that will occur when I use this?
    I am in China right now, and there are no Apple Store near the place I live. If I want to go, I have to drive there for 3-4 hours. I don't have that much time just fixing iPod. I am going back to Korea in July 2012. So, I'm thinking of just keeping my Pod in this condition until I go back to Korea. But, I'm not sure if there are going to be any problem while I am using this.
    I hope the answer will come very quick, thank you.
    p.s. I just started learning English, and my English is not that good...:p
    p.s. 2 I bought my iPod last year April 2011.

    Apple does not repair iPods, but will replace the entire iPod for a flat fee; see the Repair Pricing section here:
    http://www.apple.com/support/ipod/service/faq/
    There are independent iPod repair services that may be able to replace the screen for less. Do a web search for "ipod repair".
    Note, though, that there is no liquid in an LCD that can leak. That's a myth.
    Regards.

  • What's wrong with the code?

    public void run()
    try
    {     for(;;)
         mgr = (RTPManager)RTPManager.newInstance();
         mgr.addSessionListener(this);
         mgr.addReceiveStreamListener(this);
         try{  /*****port1 = port2 = 29261, which port is only used in here
         localAddr = new SessionAddress(InetAddress.getLocalHost(), port1);
         destAddr = new SessionAddress(ipAddr, port2);
         }catch(Exception e)
              System.out.println(e + " 4");
         try{
         mgr.initialize(localAddr);
         }catch(Exception e)
         System.out.println(e + " 5");
         //set buffer
         bc = (BufferControl)mgr.getControl("javax.media.control.BufferControl");
         if (bc != null)
         bc.setBufferLength(20);
         try{
              mgr.addTarget(destAddr);
         }catch(Exception e)
         System.out.println(e + " 2");
    catch(Exception e)
         System.out.println(e+ " 3");
    the error when i run the code is like that:
    javax.media.rtp.InvalidSessionAddressException: Can't open local data port: 29261
    5
    java.io.IOException: Address already in use: Cannot bind 2
    which means there is error in :
    mgr.initialize(localAddr);
    mgr.addTarget(destAddr);
    But i don't know what's wrong with the code,
    can any one help me?

    I do not find any problem using the same ports for local and destination address with several unicasts. My problems are others.
    But note that the error is even at constructing the localAddress, I mean before trying the destinationAddress. Thus the reason cannot be the former is already in use. In fact I think the later belongs to a remote hosts. Likely, it is trying to access the destinationAddress through the localAddress, but this has not been constructed properly.

  • Adobe - what is wrong with you?

    Do you need to go that cheap with your testing?  One minute after installing the 10.3 update on a CLEAN win7x64 build  using IE9 standard (no extras) and any site using flash, especially forums with Google ads slow to a crawl, especially editing a post or entering any text is an exercise of extreme frustration.  It is silly to have to wait 3 minutes for your cursor to appear to enter one character in a post.
    This means, you guys didn't bother to do the most basic testing with 10.3 - and with a company your size I have to ask, "What is wrong with you?"  Not only is this lazy and incompetant, but evebn worse you have somewhat of a monopoly monopoly on this type of content.  There is simply no excuse for this and this isn't the first time you've screwed the pooch as of late.  It was super fun fixing your security loopholes that delivered trojans right through computer systems via your flash ads.
    If you can't manage this application, if you can't perform the most basic net tests - then sell this business segment off to someone more competant... hopefully someone who's not so inconsiderate as to fill our computer's with unecessary bloat (cue Adobe Reader).
    Sorry for ranting.
    Message was edited by: jpinard7  - thank you to the tech answering questions here (Mr. Campbell)

    Hi,
    I'm sorry that you're encountering problems.  From your edit I'm guessing you've seen this post, but if you haven't please review it for details and a few workarounds.
    I know this is frustrating, and we do apologize.  We do testing on many systems, but for whatever reason we missed this issue with Intel HD Graphics GPU's.  If you're running into problems with another display adapter please let me know so we can investigate further.
    Thanks,
    Chris

  • Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car

    Outlook 365 retrieves same mail over & over  --  stops and restarts  -- won't sync to iPhone  -- won't work with blue tooth in car  'm using Win 8

    Hi,
    How did you set up your email on your Ipnone? Please refer to the article below and try the method to set up your email:
    http://office.microsoft.com/en-in/office365-suite-help/set-up-email-on-apple-iphone-ipad-and-ipod-touch-HA102818554.aspx
    Do you use Outlook desktop app? If you are talking about a question related to Office 365 web app, it's better to post your question to the Office 365 forum. You will
    get the most qualified pool of respondents there:
    http://community.office365.com/en-us/forums/default.aspx
    If you means that the problem is with your Outlook desktop app, please try to log on your OWA and check if the problem persists there.
    Please let me know the result.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • IPhone won't work well with Pioneer DEH-5900IB Car Stereo

    I have installed Pioneer DEH-5900IB recently and have connected my iPhone (firmware ver. 1.1.1) to this car stereo through Pioneer CD-I200 (interface cable for iPod). Then the iphone certainly asked me whether I want to switch to the airplane mode, and I said no. The music played immediately, HOWEVER the iphone could not charge (i.e. no lightening symbol), as well as 5900IB showed the message "error a0" with no playlist showing up. I could still change the song by using the navigation button (i.e. by clicking the wheel left or right side) though. Is there any possible solution to this problem?
    I don't really want to connect the iphone to this car stereo via AUX, since the sound quality it could provide was obviously inferior to the direct connection through CD-I200.
    Any suggestion, idea or even rumor on this will be really appreciated.
    Thanks!
    - SW

    Hey swkim... I just spent an hour outside fiddling around with the iPhone/Pioneer and I think I may have found a temporary workaround... let me know if this works for you!:
    With the car ignition on, and no iPhone attached to the CDi200 cord, for this first time only (to get out of the 'Error-A0' rut) reset the Pioneer reciever (on mine it involves pushing that small indentation with a pen on the front of the receiver). Hard-Poweroff your iPhone (holding the top button until the red slider comes up to power off the iphone and go ahead and turn the iphone off). The receiver should be on in its reset mode (ie. demo mode or whatever). Now, plug in the CDi200 cord into the powered-off iPhone. It should activate the iPhone. Don't press any buttons - just let it power up by itself. In 100% of the cases i've tried this way, the Pioneer Receiver will switch to the iPod state and stay in the Ready functional mode until the iphone fully boots up, and then it will start to play, charge and work normally without the dreaded error-A0!
    Now - the trick to getting this to work each subsequent time without having to reset the receiver each time (because if we have to reset the receiver each time it would be pointless - our tuner settings are gone, possibly BTooth settings gone if your receiver has that option, etc):
    When you're ready to stop the car or turn off the ignition, do so. Feel free to detach the faceplate, etc if necessary. the Iphone in the cases I tried were still attached to the CD-i200 cord as I turned off the machine. After the receiver powered off, I unhooked the CD-i200 cord from the iPhone. When I was ready to start it up again, I first turned on the ignition, hooked on the receiver faceplate, and allowed it to boot up (no need to 'reset' the receiver). The trick is though that I made sure the iPhone is now hard-powered off again before attaching it to the CD-i200 cord. Now, attach the powered-off iPhone to the cord. it will cause it to turn on and boot up again... but now (in 100% of the times I've tried so far), the receiver will now see it in its Ready state and will work!
    Anyways, let me know if this works for you. If this does, it would suggest that the problem may be with how an iPhone left powered-on tells the receiver where to resume playing a song. The upside of this workaround is that it doesn't require a reset of the receiver each time (thankfully) and, while connected in a working state (ie. non error-A0 state), it also survives Source changes so one is free to change to the TUner mode, etc, and back to the ipod source. The downside though is that one has to hard-power off the iPhone each time before connecting it to the receiver (annoying but not a biggy for me as long as this works), and instead of resuming from the spot in the song last played, it starts from track1 since the iPhone was reset (also not a big deal for me). The other downside I found is that, if the order sequence of the above workaround is changed and I end up with an 'error-A0' message, then I have to go back and reset the receiver (annoying since I'd lose my Tuner settings, ?possibly my Equalizer settings, and ?possibly my BTooth device settings on my DEH-7900BT)...

  • HT1688 My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should

    My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should I do? Please help me I need my phone for work.

    Make sure there's nothing blocking a contact in the charging port of the phone.

  • What is wrong with Facetime? Suddenly won't work on iPhone 4S or iPad mini. Connecting to ither iPhone 4S. Tried 4G

    What is wrong with Facetime? Suddenly won't work on iPhone 4S or iPad mini. Connecting to ither iPhone 4S. Tried 4G & wifi. 4 bars. What gives? Says connecting... & then times out.

    Sometimes, in a givin market, FaceTime is not available. 

Maybe you are looking for

  • Brand new laptop, noisy (?)hard drive

    Hi everybody! I was recently bought a new HP laptop for Christmas (a Notebook 15-r160sa). Anyway, I've noticed that it has a very constant 'bitty' noise. It's not immediately obvious, but when trying to do work on it in a quiet room it's very annoyin

  • How do I get my contacts back on to my Macbook pro and delete them from iCloud?

    How do I get my contacts back on to my macbook pro and delete them from icloud?

  • Keywords iphoto 6 and adobe bridge

    So I've used adobe bridge to tag a bunch of photos. I then imported these photos into iphoto 6. For some reason a bunch of my keywords weren't imported with the images into iphoto. How can I get the keywords I used in bridge to show up in iphoto?

  • E7 Belle Calender Widget

    Does anybody know if the new calender widget in Feature Pack 1 on other Belle devices will be released for the E7? The default, 1 line widget, is useless but the new one has 3 lines and you can scroll through appointments and days, making it much mor

  • How do i get past "Early Chipset"

    I have a micron 512, 64 bit amd athlon, k8t neo fsr and it goes straight to early chipset initialization and hangs there. Power supply is hercules 400w, ps2 wheel mouse, standard keboard.....etc. This all worked fine in the gigabyte board, but the bo