My iPhone 4s app store application says I have 12 updates, when I attempt to update it says can't connect to iTunes store, I plugged it into the computer the other day but it hasn't helped. What can I do?
My iPhone 4s app store application says I have 12 updates, when I attempt to update it says can't connect to iTunes store, I plugged it into the computer the other day but it hasn't helped. What can I do?
Make sure you have cellular data connection Settings > General > Network > Cellular Data
Similar Messages
-
25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her. I can access the iTunes store for all other options but not to update. How can I get her updated?
Try quitting the App Store:
Tap the home button to get to the home screen. Then double tap the home button, and hold your finger over the App Store icon. Tap the red when it appears. Tap the home button again to return to the home screen.
Try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. -
I can't download Mountain Lion from the App Store; it tells me that the product distribution file cannot be verified. What does that mean, and what can I do?
Try starting in safe mode, holding the Shift key while your computer is starting. After starting in safe mode, open the App Store and download Mountain Lion
-
Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me
You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Hello,
Can someone please help me!? I am trying to put music on my IPod and it was working the other day. I can not get itunes to recognize my Ipod. I have tried to unistall and reinstall Itunes. I have tried all the steps on the site and can't get it to come up. I tried my IPhone which was also showing up just the other day and it also is not showing in Itunes! Please help me. I need to be able to put music on my IPod for my work.I have sorted it myself!!
Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem. -
I Restore iPods Classic's
All components are correct inside, correct numbers,
I plug it into the power source,
the Apple logo appears, then it goes
to the use iTunes to Restore.
COnnect it to the computer,
and the iPod icon doesn't show on the
iTunes page, and the iPod shuts down,
after twenty seconds, reboot it, same thing.
this is a first, any ideas?Hello tsnovak!
Is English your first language? If not, I can help get someone who can speak your language to translate this article.
Tsnovak, you seem to be on a Apple Logo Loop. This has happened with several iPod generations. Contact Apple Support here: <https://www.apple.com/support/contact/>
Thanks!
- Ronní J.
Apple Support Communites -
My ipod slider screen won't show up when I push the home button to try and unlock it. When I plug it into the computar it still won't turn on. What should I do?
Try the "Will not power on" troubleshooting in the following article:
http://support.apple.com/kb/TS2771 -
My iPad App Store app suddenly all went into the Spanish language when all else and my Setting identifies my language as English. I do not know how to get it back to the English language. It appears to have come with an upgrade as it happened as there was a red circle with "3", but it does not upgrade. All the icons in the store and the descriptions are in Spanish.
Change Language
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region -
My ipod 4 apps will not open i try to update and i get cannot connect to itunes store
My ipod 4 apps wil not open. They blink on then off real fast. I try to update but get the message "cannot connect to itunes store"> New apps work. I recently upgraded to windows 7, but our other ipod works fine. I recently deleted some songs and apps and since then have had this problem. i've tried all the suggestions I can find on appe support, nothing works
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
In May I sent my iPod nano through the wash for a few minutes and then put it in a bag of rice. I decided to take it out today and plug into my computer. The computer recognizes it and seems to be charging and playing music just fine. However, my screen for the most part is white. If you hold it at an angle it is possible to see some details but it is very difficult. I was wondering if anyone had any ideas on what to do?
It sounds like the water may have damaged the iPod's LCD display. You can try working through each of the recommended 5 R's of troubleshooting to rule out any possibility of a software glitch or data corruption.
http://www.apple.com/support/ipod/five_rs/
Sometimes it helps to the iPod's battery fully drain. Then charge it back up and again and repeat the 5 R's again if necessary.
B-rock -
Why isn't my iphone 4 showing up in itunes once i plug it into the computer?
I tried to plug my Iphone 4 into my laptop to download some photos to my phone and when I opened Itunes my phone wasn't showing up. I tried re downloading Itune but it didn't help and my Itune is fully up to date.
See if this helps: http://support.apple.com/kb/TS1538
-
Please Help me!!
Can you go to Settings/WiFi, or is the setting greyed out? If it's greyed out see this: http://support.apple.com/kb/TS1559
If you can go to Settings/WiFi do you see any networks? Is the problem with one network or all networks? -
I installed ios7 on the iPad last week. Problems with factime, but solved with online support. Now the Safari screen is blank, and nothing works in the Search bar. What's up with that? All other Internet uses are working.
Hi, a too full hard drive can really mess things up.
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, , try to clear at least 10 GB of space & empty the trash, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Can you help? I am trying to order an iphoto album but a window comes up asking that I check my account info. I have done that, it is correct, and the quick click is enabled. All info is correct but it will not acknowledge it or take my order.
Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps -
my ipad was disable because i forgot the passcode. it wanted me to connect to itunes so i plug it into my computer when it pop out it said it is connected to the camera so what do i do
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the screen pictured below,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
Maybe you are looking for
-
Palm Desktop v. 6.2.2 - Media and Search functions stall application
I have a T3 - That I LOVE and STILL USE - BUT recently purchased a Centro - so had to download and install new Desktop software for it - v.6.2.2. I'm running WIndows XP. The Media function or tab stalls the desktop - I could almost live with that as
-
Hi Experts, I believe that the SAP B1 is a back end financial software. As a retail company expands and grows maybe it is more economical to deploy front end software to its retail stores or business units for functions or modules such as Sales - A/
-
FLV embedded in a SWF file, does not play in HTML file.
Hi, I embedded a FLV file into flash movie clip, which on publish plays well on SWF file, but when the same is embedded in HTML, it does not play. What is it i'm missing .. Kindly help. Regards Shashi
-
Is there a function to detect file names?
Hi Guys I'm using actionscript to create a custom navigator for a PDF Portfolio. Currently my navigator uses the function getFileExtension(value.filename) to detect the filetype, and then assign an appropriote icon. I'm wanting to change it so that i
-
How do I delete an album in my photos
How can I delete an album in my photos? I cannot delete the individual pictures or the album itself. Help!