My iphone 4s battery back up is very bad. do u ppl also facing same prob or only i am having dis prob? after full charging it only works for 6 hr not more than dat. what should i do?
my iphone 4s batery back up is very bad. do u ppl also facing same prob? it works only for 5hr after full charging. should i go for check up or not?
www.apple.com/batteries/iphone.html
Similar Messages
-
i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?
Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC -
Creative SB0410 digital out only works for dd/dts, not for stereo or web videos...
Creative SB0410 digital out only works for dd/dts, not for stereo or web videos...
Hi all,
Need some suggestions here.
I have an old Creative sb0410 7.1 channel card and after reading few long threads, I am able to output dd/dts via 3.5mm to rca connector.
However, the problem is I only hear sound if the video has dd or dts sound. When I play normal MP3 or youtube videos, there is no sound.
Is there a way to configure the digital out so it sends all sound to the receiver whether it's dd or dts or regular stereo?
ThanksAs a workaround, I used another 3.5mm stereo to RCA adapter on stereo LR output of sound card and hooked to a different input in my receiver.
Problem, is I have to switch input in receiver for non DTS/DD sounds.
It's disappointing that my upscaling dvd player sends all sound signals via coax but this card does not.
Isn't it supposed to send all sound signals via coax regardless whether it is DTS/DD or normal stereo/mono etc? -
Selection handles in Pages App is not working suddenly. I can select a word or cell,but I am not able to drag it.What to do?
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
Drill up only works for children and not for descendants
Hi,
I have made AW available from bibeans - it means I am using CWM2. But,
when I created a crosstab, I can only drill up the children but none of
the descendants. For example,
i) I have geography dimension in the row edge.
ii) I can drill down 'World' and see 'USA' and 'CANADA'.
iii) I can drill down 'USA' and see 'New York' and 'San Francisco'.
iv) When I drill up 'World', all the descendants of the 'World' should
be drilled up. But indeed, only 'USA' and 'CANADA' has been drilled
up and 'New York' and 'San Francisco' are still there in the row edge.
Does anyone have any idea about this problem? Thank you.
Best Regards,
SeijiAdditional Information:
I am using
bibeans903_pre
jdev903_pre
Oracle Database 9.2.0.1.0A for Sun Sparc Solaric 32bit
Thanks
Seiji -
I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?
Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers
-
My question is i was updating a game it got update half then due to low battery my iphone get switch of now i am trying to update my game is not geting update so what should i do pls tell me ..?
See: Resolve iOS update and restore errors - Apple Support
That error usually means that your computer antivirus is blocking the update.
It can also mean that your phone was jailbroken, or your computer was used to jailbreak some iOS device in the past. -
my iphone is dead. it was working well. suddenly it just gone dead. not charging at all. its not connecting with pc. what should i do?
HI...
Might need to restart the AMDS > iOS: Device not recognized in iTunes for Windows
Make sure the battery is charged. -
I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. Why is it off of the app store now and how do I get my money back?
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
I am updating my IPhone but than it disconected and my pc isn't recognizing it any more... what should I do?
What, exactly, happens when you try to restore it?
-
I have iphone 5 but in that i do not have facetime so what should i do
i have iphone 5 but in that i do not have facetime so what should i do
Some countries don't allow FaceTime. Check the footnotes for your region in:
<http://support.apple.com/kb/ht1937> -
If my iphone is not dailing out. What should i do?
If my iphone is not dailing out. What should i do???
Mickey311 wrote:
If my iphone is not dailing out. ...
What exactly do you mean...
What Troubleshooting steps have you tried and what were the results...
Any Error messages or Alerts... -
I have upgraded my iphone 4 to 4.3.5 and the facetime is not activated.. What should i do?
I have upgraded my iphone 4 to 4.3.5 and the facetime is not activated.. What should i do?
Help here > Apple - Support - FaceTime
-
i updated my iphone to ios 6. now i can not charge my phone with any cable. it says charging do not support this accessory. what should i do now? can anyone help please!!!!!!!
I upgraded my iPhone 4 last evening to iOS 6, the upgrade completed and the device was usable. Then in the morning I went to the device to check E-mail, Voice Messages, Test Messages, etc... and the phone was dead. I tried plugging the device into a charger (for a couple of hours) - still dead. Plugged into computer with iTunes, device not recognized or discovered, and iPhone was still dead... Took the iPhone into an Apple Store and the Technician looked it over for any visible signs of defect/malfunction, then performed various tasks to breathe life into the phone - nothing... His suggestion, at this point, was to replace the phone. He speculated that the iOS upgrade possibly corrupted the iPhone's charging firmware, and that this device was now a BRICK. Keep in mind that the phone and it's charging abilities were perfectly fine prior to the iOS Upgrade. I hate to go through the replacement hassle and the cost ($159.00) when the iOS upgrade caused the problem. Any suggestions? Thanks!
-
so i just updated my iPhone 4 to the iOS 7 but now the screen on my phone is saying "Could Not Activate Phone" So what should I do i need this fixed now
Can someone please tell me what to do. I need for something in 30 minutes
Maybe you are looking for
-
How can I see and edit my TextEdit documents saved in my iCloud from my iPhone ?
Hi guys, here is a tricky one! I saw that iCould saves my TextEdit documents on the documents to go section, but I am not able to open and edit them from my iPhone. On my Iphone if I go on "Settings > iCloud > Storage & Backup > Manage Storage > Text
-
1.Can't sync music error. 2. When trying to update: 1403 corrupted error?
For some reason, my iPhone was "freaking out" when I was trying to access its music library earlier today (constant flickering back forth between different songs by a single artist). In the end, all the music from my phone was deleted . Then when I w
-
Ora-25153 - temporary-tablespace-is-empty-error-in-oracle/
I get this error after I run my stored procedure.Surprisingly I expec this kind of error before one record could be inserted into any table in the DB. In my stored procedure , a) I first insert a record in a table and then do a insert select count(*)
-
I get a Script error on every page i visit i uninstalled and re-installed still no fix
every page i load i get script errors and have to stop script i have tried uninstall re install and that did nothing wiped everything new profile and all and still no fix... running windows 7 if that helps
-
Getting Group/Node position &orientation after a Transformation(s)
I have a set of objects in a scene that are grouped in various ways with controls to rotate these groups around each axis. After a rotation I'd like to be able to re-group the objects in the scene in a different way and then do other transformations