My iPhone 4s cannot join a public unsecured network but my iPad and macbook can. I have reset the network settings twice. Both times it worked, but only for a few minutes. What can I do?
My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems. I have reset the network settings on the iphone twice. Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again. Please help! What can I do?
Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.
Similar Messages
-
I have AppleTV and Ipad2 running VJay app to my TV over a private cisco router disabled firewall but I keep loosing the video on my TV after a few minutes what can I do?
I also get this problem on my iPad, so probably not related to the AppleTV. On the iPad I restarted Airport Extreme this time, and then the iPad saw my Home Sharing.
So to recap, restarting the router or Airport Express allowed the iPad and AppleTV to see Home Sharing. Restarting AppleTV also allows AppleTV to see Home Sharing.
So does anyone have any idea?
Thanks -
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
My ipod touch 4g heats up in a few minutes what can I do thanks
my ipod touch 4g heats up in a few minutes what can I do thanks
Wit heavy use like gaming the iPod can get quite warm.
Are you getting a over-temperature warming message?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?
Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.
-
I have a mid 2009 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?
As far as I know the older mac is compatible with AirDrop.
ThanksSo by dual-signal, are you referring to 2.5Ghz/5Ghz signal?
I'm pretty sure my Mac mini 2011 has that but for whatever reason I cannot send via AirDrop to the mini. The mini can see other computers like my 2010 MacBook Pro and send files to it, but not in reverse. The MBP is unable to see or send to the mini unless the mini has engaged it to send a file to MBP. Even then it's temporary and the mini will disappear from the MBP's AirDrop radar upon completing the delivery of its file.
So I'm a bit perplexed on how the Mac mini has AirDrop, can see other AirDrop computers and send files to them, but cannot be seen on other Macs to reciprocate. -
Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?
Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!
-
cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?
Try restarting your WiFi router by removing power to it for 30 seconds.
-
I keep getting kicked off of my wifi on my macbook pro. It is the wifi in my house. I get kicked off like every few minutes or so. Why is this and how can I stop it?
I think the other devices are fine. I'm not sure. It usually only happens like a couple days out of the week. I do know that the network I'm using when I click on the wifi symbol at the top of my screen doesn't have a padlock on it. It IS MY network that is at my house, but maybe that has something to do with it.
-
I have the original iPad and I don't have an option in Settings, General for Software Upates. The App Store only has a Spanish version. Does anyone know how I can update to iOS 5?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!
My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!
-
Email sync beetween imac an iPhone only for a few minutes
email sync in icloud beetween imac an iPhone only for a few minutes, please help.
Open System Preferences on your iMac then select iCloud.
Deselect the box next to Mail & Notes then reselect the box then restart the iMac.
Now tap Settings > iCloud on your iPhone
Switch Mail off then back on the reset the device.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
ever since i updated to ios 8.3, my imessage has been on "Waiting for Activation" Please who can assist? i have reset the network settings and also have restarted the phone.
same problem here
-
I have an IPHONE 5 with Verizon service. I never see "4G" or "LTE" come up on the phone. I have reset the network and have rebooted, to no success.
I live in the NYC metro area. I travel to Cape Cod and never see 4g on the phone.
Anyone have any hints or tips to fix this problemA Verizon iPhone will never display the 4G indicator. You will only see that on AT&T iPhones connected to their HSPA+ network. As for LTE, contact Verizon and make sure your account is provisioned properly.
-
After sucessfully installing the new IOS 7 software on my Iphone 5, my imessage will not work. It has the message "waiting to activate". I have reset my network settings several time and turn my phone off and back on. What else can I do to get the imessage back up and running?
To sync an iOS 7 device you need to be running iTunes 11.1.1; iTunes 10.6 is way too old and won't work. You need to install iTunes 11.1.1, but to do that you need to be running at least Mac OS X 10.6.8.
So you need to do the following:
1. Upgrade your Mac to at least OS X 10.6.8 (later preferably, but 10.6.8 at the miniumum).
a. Check first to see if your model Mac can be upgraded, check that it has enough RAM and so forth (2GB at the least, more if possible).
b. If you can't upgrade your Mac, or don't want to, then you will have to buy a new Mac with the latest version of OS X (currently 10.8.5, soon to become 10.9) and iTunes 11.1.1
2. Install iTunes 11.1.1 on your newly upgraded Mac.
3. Sync your iOS 7 iPhone with iTunes.
Maybe you are looking for
-
Hi, Can anyone help with this? MyDell laptop died and I had to wipe it and start all over again. I use voice memos a lot for work and I need to sync them onto my PC so I can email them to people. However, since I fixed my laptop and redownloaded itun
-
STO Conditions not flowing to Billing
Hai, I havec created STO-ME21N, & VL10B VF01- doc type:JEX maintained Copy controls & at item level - Price source- A=Pruchase order. NLN item cat. still conditions from STO to Billing doc_VF01 can anyone have any idea?
-
Transfer photo frrom computer to IPAD
is it possible to transfer photos from a computer to an IPAD
-
After Effects CC won't go past "Mediacore"
Hi, I have been having a nightmare of a time getting AE to start up. I am pretty sure I've done everything that the tech sheets say - including deleting 3rd party QT importers, and installing the latest patches. I have also installed the
-
After running my applet in the java plugin i get the following error: the Diagnostic.properties in jbomt.zip are set to the defaults in the package. i think the jbo wants to open a local stream for debugoutput, but i can to that by security restricti