My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
Hello jaicob1990,
Try the steps in the article below; it will give you multiple options on how to resolve the issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Similar Messages
-
help me out
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
My iPod touch's screen is not working. I shut it off and turned it back on a hundred times. No matter what I do, it will not work. What do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Like idk how to ask but would anyone know why my iPod touch 4g will not connect to a computer to my apple account but yet it will only charge I have tried numerous cords and pc's and still the same occurs
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
I have an Iphone 3g and i can't turn on, but if i plug it on the Iphone charger i can see the Apple Logo but it quickly disappears(Apple Logo SOD) When I connect it to the computer it won't charge and it won't turn on, I tried DFU mode and it doesn't work. I tried STABBING IT(lol, it works sometimes) and i doesn't work again. If i can't connect it to the computer i can recover it but i know that it still works. WHAT SHOULD I DO!!!!!
http://reviews.cnet.com/8301-19512_7-10115048-233.html
http://support.apple.com/kb/TA38633
Apple suggest a removal and re-install of iTunes to get over the 1601 / 1602 error message.
Other sites suggest trying a different USB socket… direct to the PC / Mac not a hub.
edit to add usb info. -
What do I do if my IPad wont turn on completely and what I mean by that I see the Apple logo and I think that it is turning on and then
after a while i see the loading symbol which means that it isn't frozen and then all of a sudden it shows the apple logo once more and it repeats the aboveTry this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, try restoring the iOS software.
iTunes: Restoring iOS software - Support - Apple
If that doesn't work, try this.
iOS: Unable to update or restore - Support - Apple -
Help! Mac won't start. I hear the ding and see the apple logo but the bar below it never goes further than an inch before the screen goes dark. I have tried unplugging.
Hello Templemeads,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Have a nice day,
Mario -
Need help with my Ipad 2, after few minutes of charging the ipad comes on, i can see the apple logo and stops there and the battery doesn't get full charge
Have you tried rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If the iPad will still not turn on completely, then you should probably restore the iOS software.
iTunes: Restoring iOS software - Apple - Support -
HT201210 My iphone 4s will not power up it cyling through the apple logo. And it wont restore
iphone 4s will not power up. And keeps cycling through the apple logo. Cant restore either
Hi pgilzene,
If you are having issues restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
My macbook pro mid 2012 will not start up. I was running bitdefender and when I went to see if it was done, I had the apple logo and the loading (winding circle) on the screen. I can not get out of this. I used my back up external drive and it did nothing. It did light up.
samnleosgpa,
you may have faulty RAM. Are you able to boot into your MacBook Pro’s Apple Hardware Test (“AHT”)? If so, try running it to see if it can detect a problem. If you’re not able to run its AHT, and you’ve upgraded your MacBook Pro’s RAM before, try reïnstalling its original RAM and see if you can get past the “-6002F” error code. If you aren’t able to run its AHT, and you haven’t upgraded its RAM or you no longer have its original RAM, then I’d recommend that you make an appointment at your nearest Apple store to have them diagnose the problem. -
I was downloading up-dates and maybe disconnected before comlete!! I thnk it may have even started to restore but all I know is that it is frozen to the extent that it will not even turn off!! Any help please would be great...it is my aughters ipad and I think she will hate me for the rest of her life if I've mucked it up!!
- Try resetting the iPod
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to cpmputer and restore if it shows in iTunes
- If iPod is still frozen on, let the battery fully drain. Then after charging for an hour try the above again. -
An update from Apple appeared on my iPhone so I downloaded it, it was an IOS update. The screen said to swipe to open, then enter a 4 digit number, which I did then it went to a screen asking for my network info which I entered (except I guessed at the security as being "WPA2", I have not idea, I entered my password and now the only screen that will appear is one stating it is Joining my stated Network??? but nothing is happening and I can't use any of my iPhone features at all? Help
Go back to the previous page. If there's no available wireless networks listed except "Other" which is manually putting the wireless network information, see if you have "activate using cellular" or "connect to iTunes" option.
-
serial no is
Hi chelsealynn1205,
If you are having issues with your Mac not booting past the grey Apple screen, you may find the following article helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Regards,
- Brenden -
P L E A S E
H ELPDid you try a hard reset? Hold the On button and the Home button until it powers down but continue to hold until it begins to power up again. See if that brings any success.
-
I have a red X in a circle which sometimes changes to the apple logo but nothing else happens after i try every suggestion; Windows nor itunes does not recognise the ipod; what do you suggest?
You could possibly try a restore from itunes or from the ipod itself, otherwise go get it looked at/replaced, that sounds like a software issue.
Maybe you are looking for
-
Format for fields in an internal table
DATA: BEGIN OF ITAB OCCURS 0, AUFNR LIKE AFKO-AUFNR, " Purchase Order Number PLNBEZ LIKE AFKO-PLNBEZ, " Part Number BISMT like MARA-BISMT, " Old Material LNO(2), GAMNG LIKE AFKO-GAMNG, " Production Order Quantity GLTRP LIKE AFKO-GLTRP
-
I've used my Elements 9 several times before, but not at all in the last couple of months. When I went to use it today, I'm unable to start a new project or load an existing project. When I try to do so, it will be almost all loaded in (the project)
-
Onbeforeunload event does not work correctly!
Hi friends, we use the ApEx 3.2, I changed the page templete as </script> <script type="text/javascript"> window.onbeforeunload = function(){ confirmLogOut('Are you sure to want to exit ?'); </script> #HEAD# </head>The code is not operated correctly
-
Service Contracts - Counter Assignment
Dear Colleagues, I'm trying to assign a Counter to a Service Contract. 1. Created a Service Product, Conditions maintained, Prod cat Group- SRVP, Category ID - SRV_SRV1. 2. Open Service Contract (CRMD_ORDER), BP, Org etc., maintained. 3. Service Item
-
How to create links above interactive content?
I want to have a movie or a slide show, with a texthyperlink above it while the movie running, have tried with combinations of superoverlays, as a button and as a hyperlink. Is there a workaround or have i missed something?