My iPhone 4s doesn't work

Hi,
I bought an iPhone 4s via online shop in USA and I have been using it in Turkey. My phone's IMEI number is 013049008325278. Last week, it was getting warm and then closed. I have tried to open it but couldn't.
Then I shown it to the Apple's authorized technical service in Turkey which name is GENPA and they told me that they couldn't solve the problem.
Now, my phone doesn't work, what should I do?
Should I throve my iPhone 4s to the garbage or could you help me?
I am waiting your answer ASAP.
Thank you for your interesting,
BR

Troubleshooting starts with a reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
If that doesn't solve it, backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

Similar Messages

My new iPhone 4 doesn't work at all

You are definitely not alone with your issues. I'm on my second iPhone 4 unit, and am still having the same problems. I've had proximity sensor insanity, battery draining after 8 hours of stand-by (NO USE, just sleeping) to the point that my phone goes into a coma and has to be plugged in to be revived, the grip of death dropping calls....
But the single most irritating and infuriating problem is the signal strength/reception fluctuation. I share a house with two iPhone 3Gs users, and I had an original silverback iphone until July 2010. They all work fantastically well with no issues when I'm at home (where I am just about 24/7, since I work from home). *_My new iPhone 4 doesn't work at all.*_. Signal strength is all over the place. I did a test where I sat watching the bars showing signal strength for five minutes. In that time, I saw it switch from E (edge?) with full bars to 3G with full bars to 3G with 1 bar to 2 bars to 4 bars to 1 bar to "Searching." Then back to 3G, with degradation of bars from 3 to none, then E network appears again, this time with full strength. This all with the phone sitting on a table, not being touched by human hands.
It seems that my iPhone is constantly switching actual physical networks, and as a result signal strength is all over the place from one 30 second period of time to the next. This drains the battery like crazy, and means that all incoming calls go to voicemail--usually without my phone ever ringing.
The 3G phones in my house work great. The 1st G iPhone I have had since the week it came out worked great (though its battery doesn't hold much of a charge anymore, after three years). On my new IP4, games are awesome. The videos and photos are amazingly clear and high quality, and editing on the phone is out of sight. iPhone Apps rule. MobileMe syncs my contacts quickly and easy. The only thing I love more than the iP4 features is my iPad--it rocks.
Everything works on my IP4 at home BUT THE ACTUAL TELEPHONE FUNCTIONS. This is unacceptable. In late August, after two weeks in which I had 4 minutes of phone use, the nice folks at the Apple store switched me to a new phone, no questions asked. The phone worked so much better, I could send texts and place calls most of the time (this was now the first part of September)...except that now that I was using my IP4 to make phone calls, I started having a problem with the proximity sensor during those calls. I'd be talking and my cheek would mute the phone, turn on speaker, open contacts and edit info (with gobbledygook), and of course, hang up on people.
So around Sept. 18 I was told by Apple phone support to update to iOS 4.2, restore as new, and do two complete power up and drain down cycles. This would fix the proximity sensor and any other issues.
Well, I would love to see if iOS 4.2 actually did fix the PS, but I can't get the signal strength to stabilize long enough to have an actual phone conversation. I'm back to watching the signal strength go up and down at random (with me touching/holding it carefully to avoid grip of death, and also when I leave phone on the table with screen lock off --no touching). It is back to switching between E network and 3G and varying strengths of wi-fi from my home network. This eats up battery from 100% to low enough to turn off in under 10 hours of standby (usually 6-7). Essentially, my IP4 is back to being unusable as a phone.
So I did another long, involved call to Apple tech support on 9/18. They tell me that I have to turn off wi-fi, turn off 3G, turn off push/fetch and notifications, shut all apps (no multi-tasking) and do everything but switch my phone to airplane mode--and see if the battery holds up for 24 hours in standby. If that didn't work, I should restore from new, but not load any contacts or network or data or anything--just leave it as it would be out of the box new.
As a test, I turned everything off as advised: 3G, wi-fi, push, etc. Now my battery life is back to normal, where I can have the IP4 on stand-by for up to two full days before needing a recharge. Fabulous. BUT IT'S NOT A SMART PHONE if I have to turn off 3G, turn off wireless, and not use email push and so forth.
I'm so frustrated I could scream. I'm quickly coming to the conclusion that there is a significant flaw in the new iPhone. Or perhaps it is just an issue for iPhone 4 users in areas where the signal strength is marginal, or where there are two types of overlapping network coverage (E and 3G in my case). I know that the networks themselves are in good condition--though I'm in a semi-rural area, the state capital is 4 miles away, and I know they have a new tower and good coverage for the politicians and power brokers around town. The phone coverage area I live in has Edge network in the south part of the network area and 3G in the north part, which is the state capital. I'm right in between. Could this be the problem? AT&T says no, it's Apple's fault.
Message was edited by: HighSierra

So what to do besides complain? Troubleshoot?
I just wonder if all of us who have had chronic signal strength and "Searching for network" issues that totally drain the battery might have something in common, despite being all over the world? I'm using wi-fi 95% of the time, and live in a semi-rural area with overlapping networks run by same carrier. Apple folks hinted that maybe in my area the network usage is nearing capacity (resulting in getting kicked off of 3G and down to E as new calls are placed that strain capacity). They also hinted there could be interference from mountains or other objects. But here's the thing--3G phones work fine, and my IP4 works fine when I'm away from home, usually in the capital city on strong 3G network. (When I say "works fine I mean the signal is good and calls go through, I haven't tested battery drain away from home yet).
I have to conclude that the problem is the IP4 itself--something about the hardware or the software (namely, the way it connects to the phone network) is horribly wrong. Other folks who live in urban areas or with strong networks that (likely) aren't over-utilized don't seem to have this issue. After reading through these pages, it also seems the wi-fi may be a major culprit in draining the battery and in varying signal strength (this is from Apple phone support, which said that varying signal strength and the constant pinging off the home wi-fi is creating a "power struggle" and keeping the phone constantly looking for the best connection option). Mind you, 3G iphones on the same home network have no problems whatsoever.
So while I'm not a technical expert, it seems like the problem HAS to lie in the differences in the way the IP4 connects to the cellular and/or wi-fi network. And since the connection/signal strength problem was "resolved" on my replacement phone, but then "broken" again by the software update of iOS 4.2, I'm leaning toward this being a software issue. I've offered to help Apple troubleshoot, and I'm trying to be patient--because the IP4 is a work of art and I've never had an issue with an Apple product before. But all they want me to do is restore, restore, reload, restore, and then drive 1 hour to the nearest Apple store (in Reno, NV) and get a new phone...and start the whole process over again. I don't have time for this, I need my phone back.
I'm this close to trading in my beautiful but flawed IP4 for a 3G. Maybe I should just get a new battery for my original iPhone from 2007?
I understand that Apple can't test for every possible variable of use all over the world, but they don't even seem to acknowledge that they have a problem with the IP4 that will not be resolved by replacing it with a new unit. They want me to believe it's a fluke, or it's just me...but I've been combing these threads and see a lot of people reporting the same issues I am--battery drain and wildly fluctuating signal strength issues, wi-fi problems, and dropped calls. Can't someone get on this? Because otherwise Apple is going to have to admit that their IP4 is not a good solution for people who live in areas of less than perfect signal strength or use wifi or whatever demonic combo I have in my home/work setting.
Or people will have to do what I have done--if you who want the cool IP4 non-phone features, you will have to dumb down your IP4 in order to have it be even moderately useful as *a phone.* For $599 I expected better.
My (temporary) workaround?
To spare the battery:
*Turn off wi-fi (which *****, because now I have to burn minutes when I'm at work using the email, downloads, safari, etc--and it's E network, so it's SLLOOOOOOOW)
*turn off push and fetch, have mail get new messages manually
*turn off data roaming
To keep the signal somewhat stable (making it easier to complete calls and spare battery)
*Turn off 3G (this leaves me on E network--fabulous, I had that with my 3 year old iPhone)
*grip IP4 between two fingers placed at the top of the phone, away from death zone. Tough for us lefty phone users.
*pray the free bumper will a) come soon and b) help. I'm not optimistic.
To keep proximity sensor from going nuts and dropping calls, muting, turning on speaker etc:
*use headset or bluetooth (unless you are also having one of the known bluetooth issues!)
*keep phone pressed to one ear and don't move it a millimeter. Don't shift sides, don't hold phone with your shoulder, just keep it to one ear and talk fast).
I'm about out of patience. I understand that lots of folks have and love their IP4s. I'd love to be one of those people. I'm open to suggestions and have spent many hours on phone with tech support, restoring my phone, reloading data and apps--there has to be a better way.
Sorry for the thread-jacking, but someone from Apple has got to be following these threads--help us!
null

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

The speakers on my iphone 4s doesn't work to ring or to play music how do I fixes it?

The speakers on my iphone 4s doesn't work to ring or to play music how do I fixes it?

Try resetting your phone by pressing and holding both your home and power button at the same time for about 15-20 seconds till the apple logo appears ..
Hope it works out for u :)

The middle button on my iphone 4 doesn't work properly what can I do about it?

the middle button on my iphone 4 doesn't work properly what can I do about it?

Make an appointment with the genius and bring to the Apple Store.

TS1398 The internet on my Iphone 4 doesn't work when I use the Wifi

The internet on my Iphone 4 doesn't work when I use the Wifi at home. My Mac works fine. On the Iphone it shows it's connected but it doesn't open any app. Anyone knows what to do? Thanks

Ÿ. If you tap and hold the "Y" does it appear? If so, just slide your finger up to select.

My Iphone 5s doesn't work. When i power on appear searching the sim card, but doesn't connect to the operator. Who can help me?

Hy dear!
My Iphone 5s doesn't work. When i power on appear searching the sim card, but doesn't connect to the operator. Who can help me? I reset the Iphone, but doesn't fix the probem.
Thanks

Hi dear!
I'm very disappointed with Apple products! I was 15 days without my Iphone 5, because it stopped working and the had to be replaced by authorized apple. Then i bought an iphone 5s in two days it stopped working. Doesn't read the sim card. I call to Apple suport and discovery that the model A1533 is not warranted in Brazil and need to be replaced, because there is a hardware problem. In a moment i don't have anyone Phone. Why Apple does not send other equipment equal to authorized to exchange my Iphone, because in Brasil doesn't have the same model? I liked a lot this Apple phone, but i can't use, i have one brand new, but doen'st work. I don't have anybody in USA to exchange in one Apple store. Please help me!
Thanks.

My iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????

my iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????

I would attempt a reset. This is done by holding both the powerbutton and the home button for about 10 seconds for it to restart.
When it boots back up, test the issue. If the issue persists, I would then recommend a restore through iTunes on a computer, set up as new, and test again. If it's now working, i'd recommend to restore from your last back up see if it resolved your issue.
Hopefully the first reset solves it, in most cases it does.
Regards

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

IPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

iPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

HT201406 i have been having trouble my iphone 3gs doesn't work the slide to unlock is broken i have tired everything to get it open but it won't work please help me!

i have been having trouble my iphone 3gs doesn't work the slide to unlock is broken i have tired everything to get it open but it won't work please help me!

Basic troubleshooting steps are: Restart, Reset, Restore,

The key of on/off my iphone 5 doesn't work

THe key of on/off my iphone 5 doesn't work

<https://www.apple.com/support/iphone5-sleepwakebutton/>

The main button of my Iphone 5 doesn't work anymore. do you have a solution? thanks

The main button of my Iphone 5 doesn't work anymore. do you have a solution? thanks

Get a replacement phone. If it is still covered by warranty it will not cost anything. See: https://selfsolve.apple.com/agreementWarrantyDynamic.do

My iphone 5 doesn't work on docking station

My Iphone 5 doesn't work on my Illuv dock station. It charge however. How can fix it?

Thank you.
The problem was the adaptor for conector lightning. It wasn't original Apple. Problem solved!

TS1398 My iphone 4 doesn't work with public wifi

My iPhone 4 doesn't work with any of the apps apart from weather app when I use public wifi, such as iCloud. The sign still shows that I am connected with wifi hotspot even when the signal is the strongest.
I have tried resting my iPhone 4. But doesn't work. But other wifi such as in my home or at uni which require login work well with the device. I am not sure what seems to be the problem.

Apple doesnt like generic network names link Linksys, or Belkin - when the network is a generic name there is no way to identify your "linksys" vs my "linksys" so it has trouble connecting and remembering these networks.
You need to connect to a unique network name as described in http://support.apple.com/kb/ht4199

Front camera of my iPhone 4 doesn't work, the virtual cover doesn't open.

Yesterday I have bought an used iPhone 4, so I don't have any guarantee. But the front camera doesn't work, the virtual cover doesn't open. I have read that it is something like a hardware fault. Now my question is, if Apple has to repair it because of the hardware fault?

they dont do repairs..is much easier for them to give u new handset..which u have to pay for if is out of warranty.
dont be affraid is not a full cost of handset.is be about £139.00-£169.00
i use to work as an technician engineer in a phone shop still have access to warehouse with replacement parts.
if u live in UK and willing to pay £50 i can repair it for u.i'm still cheaper than apple store

My iPhone 4s doesn't work

Similar Messages

Maybe you are looking for