My iphone 4S gives no ringtone or sound anymore the moment it has fallen into sleeping mode.Do I have to replace it or can this problem be solved ?

My iphone 4S gives no ringtone or sound anymore the moment it has fallen into sleeping mode.
Do I have to replace it or can this problem be solved ?

I have the same problem ios 5.0.2 will resolve the issue.

Similar Messages

  • Has anyone encountered drastic shorter battery life both on iphone 5 and ipad since updating to iOS 6.1.2? How can this problem be solved?

    Dear all,
    I am new to this community even though I have been a Apple user for years, so please forgive me if this question is not in the right section.
    Has anyone encountered drastic shorter battery life both on iphone 5 and ipad since updating to iOS 6.1.2? I've always been happy with these two products until the update - now the battery life is considerably shorter which is extremely frustrating.
    How can this problem be solved? Is there any way to go back to the previous version?
    Thanks for your help.

    If you update using iTunes the phone is first wiped clean, then the new OS is installed, and finally the backup is restored. After this finishes if you sync your music should be restored. Music is not in the backup, because it is already on your computer and duplicating it would use up a lot of hard disk space.
    An OTA update just patches what has changed; it does not disturb content.

  • TS3694 I have attempted to update my iphone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

    I have attempted to update my iPhone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

    Without knowing what you did and exactly what happened (error messages) all I can suggest is:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Hi I have purchased my iPhone 5s from USA and now I am in India. But by mistake my phone got slipped and it's screen got broken. Even he phone is still working. My question is that can this problem be solved by Apple India and by which solution ??

    Please suggest me that if Apple India can handle this problem as I have purchased it from USA..

    Hello Kgd007,
    I am sorry to say but as per Apple Policy you will not get Support in India for any iPhone which is not purchased in India, Apple provides International warranty for all Apple products (Excluding iPhone). And if you have an iPhone which is Purchased from United States you will get support for that in all country where Apple have there direct presence and as Apple do not have there own store or service centre currently in India you will not get any support for that iPhone. And also as you said that your iPhone has physical damage which is not covered under Apple warranty but it can be replaced by paying certain amount in the country where Apple have there direct presence.
    For more Information you can call on Apple Toll Free Number : 1800 425 0744

  • My iphone 3gs says I need to restore my phone with itunes.  when i connect the phone it says i need to unlock the phone which i cannont due because of the caution saying i need to restore.  does anyone have any idea how to fix this problem

    My iphone 3gs says I need to restore my phone with itunes.  when i connect the phone it says i need to unlock the phone which i cannont due because of the caution on the phone.  How do i fix this?

    Hold down the power button and home button at the same time until the phone powers on, shuts back off, powers on again and continue to hold it until it shows the itunes logo to plug in to itunes. This should allow you to restore without unlocking it.

  • IPhone 3gs wont turn back on once it goes into sleep mode!

    2 days ago my iPhone 3gs (OS 6.0.1) has gone completely wacko on me and i'm completely frustrated!   I have my phone set to have the screen shut off after 5 minutes.  Usually, to just reaccess the phone I just simply hit the home button.  Now, if I let it go into sleep mode, the phone WILL NOT come back on!  I went online and did some research, and it suggested holding the home button and the sleep button for 10 seconds to get it to come back on.  It works most times, but sometimes it takes a few tries to get it to come back on, and when it does come back on it takes forever to load up.  But the whole thing happens all over again when it goes into sleep mode.  My phone is fine as long as I set it to never go into sleep mode, but it is killing my battery.  I need to be able to put it into sleep mode as I have to be able to go all day without charging it at my job.  PLEASE help...I don't know what's going on with it.  I have never done anything to it (jailbreaking, illegal stuff, etc.) and I do all the updates that it asks to do.
    Please please help!
    Jennifer.

    If you actually see a "6" error code, here's what it means.  Disable your anti-virus and/or firewall.
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this??

    I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this

    You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
    Unless you've iPhone 4S (looks similar to iPhone 4)

  • Lot of times my contacts has deleted from my Iphone 4S, Give me a solution, most of the time in my work time I have struggled more,

    Lot of times my contacts has deleted from my Iphone 4S, Give me a solution, most of the time in my work time I have struggled more,

    On your iPhone, go to settings> "mail contacts and calendars" and scroll down to the contacts section. Tap on "default account" and check what your default account is. change it to "on my iPhone" or "iCloud".
    If there are other accounts (such as Hotmail, gmail, etc) included in that list, check the contacts section on the respective website.
    A possible explanation for your issue is that (for instance) you once had gmail listed there, and all your contacts were syncing to gmail servers. You may have then added a different account which listed itself as the default contact syncing server, replacing the original information with what is on the new server (nothing)
    If you have an exchange server listed, then you might want to have a talk with your works it department...

  • Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.

    Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.
    All of the apps I have found on the App store either do not have the text to speech capability or if they have it they will only read a page at a time or simply read the text you paste into their window. I really do not understand what is so difficult about having this feature as Kindle provides it--though Amazon does not make the feature available on its iPhone 4 app.
    Please help.

    thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
    I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
    thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

  • Satellite P200D-11R sound and graphics crash after waking up from sleep mode

    Hi,
    I am wondering if anyone here has had similar experiences to mine (below) or can offer any solutions.
    I have upgraded my P200D-11R OS to Vista 64 Ultimate to take advantage of the extra performance. I also add that the BIOS has already been updated to version 1.4.
    Well, everything works fine with the standard 2Gig of RAM which the laptop was supplied with originally, however, when I upgrade the RAM to 4Gig (2 x 2GB Samsung 667mHz modules), sound and graphics problems appear every time the machine is brought back from sleep mode.
    The sound card makes a very laud fuzzy noise every time it wants to play a sound and the graphics produce lots of horizontal lines on the screen. I then just have to restart the machine which means loosing all my unsaved work.
    Everything works fine as long as the machine does not enter sleep mode. I have currently disabled the sleep mode to prevent the machine from entering it but I am finding life very hard without it.
    I am very surprised and also disappointed at the fact that Toshiba did not test these machines with Vista 64 Ultimate and 4Gig of RAM!
    Extra info:
    The memory is the same Samsung type as the 1Gig modules supplied by Toshiba originally with the machine, and the part number Toshiba recommends.
    I have tried installing other (more recent) device drivers by Realtek and ATI without any improvements.
    The memory modules pass all tests and are not defective. They have also been tested on my friends Dell notebook with no problems even in sleep mode.
    I have installed my friends Dell 2Gig memory modules in my P200D and they too produce exactly the same results with post-sleep crashes.
    My thoughts are that this must be another BIOS issue unless anyone can shed some light on the issue from another angle.
    Please help! Many thanks in advance.

    Hi Sascha
    Since you are running a Vista 32bit version, the upper limit of the memory recocnised by the machine is 3.2gb which is the maximum a 32bit operating system can address and use. The diffrence here is that I also upgraded my OS to Vista Ultimate 64bit to get yet better performance out of the 64bit dual AMD processor.
    3.2gb of RAM on 32bit OS does not necessarily increase the performance. However, it keeps the performance stable when you open many more programs at the same time since the machine has more RAM to play with before staring to use the much slower hard drive as operating memory (Page File), to keep all thoes open programs running.
    A 64bit OS such as Vista Ultimate 64, recognises the whole 4gb of RAM and much more (for instance, 8gb with 2 x 4gb RAM modules). The 64bit OS itself would generally consume more RAM to start with, however, with 4gb I found the general performance to be much better. Going back to the problem however, my P200D-11R with Ultimate 64 and 4gb RAM refuses to wake up from sleep mode gracefully and the graphics and sound crash every time, forcing me to restart.
    My feelings at present is that eventhough your machine may be slightly different, I bet if you upgrade your OS to 64bit, the machine will start recognising all of the 4gb of RAM and post-sleep crashes will start to appear!

  • Hi, I just bought a new Macbook pro and i am trying to transfer my photos from my iPhone to my macbook. I set up the account on iTunes but it won't transfer my photos. How do i do this?

    Hi, I just bought a new Macbook pro and i am trying to transfer my photos from my iPhone to my macbook. I set up the account on iTunes but it won't transfer my photos. How do i do this?

    Hi, I just bought a new Macbook pro and i am trying to transfer my photos from my iPhone to my macbook. I set up the account on iTunes but it won't transfer my photos. How do i do this?

  • My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

    My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

    By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
    If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
    I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

  • HT201210 my iphone 4 has gone into restore mode and locked up. When connecting to itunes it tells me it is going to wipe my date and reset to factory spec. I have not backed my data up to itunes for age. (yes i know). How can i get it going again without

    My iphone has gone into restore mode after accidently pressing backup. It tells me i will lose all my data. How to i get back into the phone and not lose my datea
    i havent backed up in ages (yes i know thats flakey)

    Birdman01 wrote:
    My iphone has gone into restore mode .... How to i get back into the phone and not lose my datea
    It is all too late...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I was in the middle of the latest update and my iPhone now says it needs to restored will I be able to back it up first. I have photos on it I can NOT loses

    I was in the middle of the latest update and my iPhone now says it needs to restored will I be able to back it up first. I have photos on it I can NOT lose

    It should have backed up automatically at the start of the update process. And you should be saving photos from your phone to your computer regularly, just like you would with any digital camera. If you were not doing this you MAY lose the photos, but if your backup at the start of the update was successful you will not. Just DO NOT sync after the update, until you have restore the backup and verified that it is OK.
    What error message did you get during the update? Before you restore do the following:
    Reboot your computer
    Connect to a USB port on the computer directly, not a hub
    disable your antivirus and firewall
    Launch iTunes
    Finally, connect the phone and restore.

  • I have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    Thanks.  Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

Maybe you are looking for

  • Error in unzipping the downloaded file

    I am having problems in unzipping the downloaded oracle personal version 8i file. Server name : PC pentium II intel File name : psoracle81798 Date/Time : 07/10/2002 9.50 pm ET Browser : IE O/S : Windows 98 Error Msg : the unzip software programs give

  • Problem with recovering from windows phone 10 to 8.1

    I installed windows phone 10 on my phone (lumia 730) and after a survey decided to turn back to WP 8.1. So, I installed windows phone recovery tool on my lap top and connected my phone with in. In the middle of recovery process the connection failed

  • Recover database to another database -- RMAN duplicate?

    I have a situation where I want to restore our production DB on server 1 (prod1) to test DB on server 2 (test1) to a paticular point in time. I have rman catalog and backup of production database. DB versions our both 10.2..0.3. I have been attemtpin

  • Can we Pass value from PDK to Webdynpro

    Hi , Can we pass the values from PDK to webdynpro screen.I have created a screen in PDK , i want to send the control to the webdynpro application on some action. whether is it possible ? if yes tel me how to go about that . Rakesh

  • Need Enqueue and dequeue BPEL process

    Hi All, I am new in BPEL. I need creating asynchronous webservice using AQ Adapter. If any bodies have Enqueue and Dequeue(using Correlation ID) related task please help me. Thanks and Regards, M.Sathiya