My iPhone 4S has been "unable to connect to network." Have reset network settings, turned modem off and on, phone off and on, but not able to connect. Any fixes?

dear tech support team please take care about me my 4s not working

Sorry, but we are all users here, just like you, and Apple is not following these discussions.
But here is what you can try in your situation, clicking on the blue links at the end of the post will take you to detailed descriptions to solve your problem.
To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone.
If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

Similar Messages

Just hooked up new apple tv for first time. able to connect to internet (netflix, youtube) but not able to connect to my itunes account via home sharing. apple tv tells me to make sure computer's itunes has home-sharing enabled, which it does. any advice?

Just hooked up new apple tv for first time. able to connect to internet (netflix, youtube) but not able to connect to my itunes account via home sharing. apple tv tells me to make sure computer's itunes has home-sharing enabled, which it does. any advice?

Have done both suggestions, still not working. Could it have somehting to do with my local network? I am using a wireless Internet provided by my apartment building so not sure if apple tv and my computer are not technically on the same "local network?"
apple tv and main computer are connecting to Internet fine. Just cannot see my itunes on apple tv.
any other advice? My itunes is turned on to home sharing. i entered the same apple itunes account into aple tv. but appletv keeps saying my computer's home sharing is not turned on...but it is.

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306

I installed window7 on mac but not able to connect internet. how to install drivers

i installed window7 on mac but not able to connect internet. how to install drivers if it needs to be.

if you downloaded driver updates through bootcamp onto flash drive then once windows is installed, open the flash drive in windows. You'll see an application called Setup. Double click on it and it will install all the drivers for wireless and ethernet and usb.
You cant just tell windows to search for driver updates. These EXPERTS aren't telling you this.

Help! iPhone 4 has been syncing for 12 plus hours after reset.

Apple did a complete reset of my iphone 4 yesterday, and i went to sync my phone last night and it has been syncing for 12 plus hours? Help?

For the last 12 hours it has been on step 4 or 4 saying "waiting for tiems to copy" it already copied all 2000 individually. So what is it doing?

HT4061 my iphone 3GS has been unable to be accessable then how could i find the serial no

I tried to update the software for iphone but unfornately it didn't.there is a message that we are sorry that it couldn't upgrade and consult customer care
in iphone it asks for launguage,country and wifi connection, where i don't have an wifi connectivity so I selected connect to itunes.Though that option is selected there is no change.. what should I do to restore iphone...please help me

Has your phone been jailbroken or hacked to unlock it?

Installed successfully, But not able to open any website, says connection timed out.

I have installed firefox successfully. When i enter any website its status shows connecting, For eg. Connecting to gmail.com, but after some time it says connection timed out.
No problem with internet, i can open the same website with other browsers.
Please look at this. I faced the same with the 2 versions FireFox5.0 and 3.5
OS - Windows7 64 bit operating system.

Thank you for your help Steve! Unfortunately it is still not working. I have tried all day long ... please see attached the two error messages that I'm getting from InDesign alone. Do you have any further advise?
Thank you!

I am struggling to connect my macbook pro to a wireless network. Works fine with USB and my Toshiba can print wirelessly but not the MAC. Any ideas?

Hi
I cant print wirelessly on my Mac pro but can via usb. the Toshiba does work wirelessly..any ideas?

If you can use the wireless network properly (surf the web, check email, etc.) then there is probably nothing wrong with your network settings.
When you print from your Mac Pro, does the printer show up in the Printer list at all (in the Print dialog box)?
If not, have you already tried to Add Printer from the bottom of the Printer list?
If you click Add Printer and it can't see the printer, the next thing to do is probably go to the Toshiba printer web site and see if there is a Mac printer driver to download and install so that it shows up in the Printer list.

Installed Certificate on Ipad but not able to connect to corporate server

The certificate is installed, but i am not able to get on to my server. when i go to mail.mycompany.com it only give me the option to check email, and not the option to log in remotely.... i am trying to log on to the remote desktop. Is there something on the server that i need to do with the firewall, etc.?
When i click on the profile on my ipad to view the certificate is shows "Unsigned"
Please help...Thanks

I know that corporations may give you passthrough access to the Internet but will not actually join your device to the network. So, am guessing that several other options are possible that may explain your situation. Check with your network people. They should be able to clear this up for you or, at least, eliminate some options.

IPhone 4 has been stolen by pickpocket!

My iPhone 4 has been stolen by pickpocket.
I have made police report for it. I know there was no chance to get it back.
Can i report to any Apple Support for this issue?

Apple is not law enforcement and is not in the business of helping user's track lost/stolen devices. They are only a manufacturer, like HP, Motorolla, Sony, LG, Nokia, and Samsung.
If the device is turned off... there is not much that can be done.
Contacting local law enforcement and reporting it stolen and reporting it to the carrier is the extent of what a user can do.

The updater has been unable to communicate with the update server for at least 1h.

Hi All,
there is a warning message on one of my IronPort C300V
Version: 8.0.1-023
The error message is mention below
"The updater has been unable to communicate with the update server for at least 1h."
please suggest the issue and steps to resolve the problem or suggest that it is very critical so can i open the cisco tac call.
Thanks ,
Madhuraj

If you continue to receive this error please check that the virtual appliance is configured to use the dynamichost for updating:
myesa_2.local> updateconfig
Service (images): Update URL:
<ommitted for brevity>
[]> dynamichost
Enter new manifest hostname : port
[update-manifests.sco.cisco.com:443]>
Once 'dynamichost' is entered, the current dynamic host in use will be displayed in the prompt [ ]>, as seen above.
You will need to verify that the appliance - escpecially if a virtual (VESA) - is using the correct host.
Steve
Cisco Content Security - Email Security

The Blackbery device simulator is not able to connect to the mobile server.

Hi
While login to Sap Mobile BI i get the below error.
"unable to connect to mobile server.The request is timed out(0x008)"

Thank You for your reply.I had no problem with the mobile network connections it is on.The issue i am facing i am using proxy server deployment where we don't have to mention host_port in the vas cluster configuration due to which i m not able to connect to blackberry Simulator which is on client machine.But if i specify the client machine port to Host_port then i m able to connect.Can you help me to configure the Mobile server for a non-BlackBerry
deployment that uses a proxy server

Not able to connect any which way

Greetings,
I have a Wireless WRT54G V8. I've been using it for a couple months (password protected), and all of a sudden I am not able to connect. My 1,2,3,4 and Internet LCDs are all lit up (not flashing), but the Power, DMZ, and WLAN are not. My cable internet is active, but if I try to connect with a cable running through the router, I get nothing, so I haven't been able to connect to the router at all to make any changes or access the unit. I've tried resetting the system as directed through the troubleshooting (both holding the reset button and unplugging while holding the reset button). I've also just tried unplugging the router for a while and still get no response. One time one of the ports blinked a couple times as well as the power LEDs, but then it went back to where all the Ethernet port LCDs were lit with the Internet LCD. Last night, I left it unplugged for a half hour, and plugged it back in, and I did have a wireless signal for a couple hours after it sat for a while, but today I was back to having nothing working. Any help would be appreciated. I'm baffled since I can't manually reset it, and why would it randomly work last night??
Thank you in advance!
Regards,
Kyle

Press and hold the reset for 30 seconds.
Unplug power from router holding the reset button.
Reconnect the power and release the reset button.
and upgrade the firmware.

I downloaded the latest upgrade and I still can't get my wireless to connect. I have restored factory settings.

I loaded the 8.1.1 upgrade to my iPad 2 and I still can't get the wireless in my home or elsewhere to connect. I have reset factory settings to no avail. It doesn't even recognize the network in my house. Using my Verizon data as the sole source for now, which costs $$$. The machine has not worked well since 8.0 upgrade. Any thoughts?

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

Reporting Services not able to connect with sharepoint

HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

My iPhone 4S has been "unable to connect to network." Have reset network settings, turned modem off and on, phone off and on, but not able to connect. Any fixes?

Similar Messages

Maybe you are looking for