My iphone 4s is no longer connecting to my laptop due to usb
my iphone 4s is no longer connecting to my laptop. It states that my usb is a 3.0 and my iphone 2.0 is not compatible whereas it had worked before. Advice on how to link it back together?
My iphone is coming up as unspecified in my control panel and when i troubleshoot it, it states that my apple usb device is older and wont work with my usb 3.0 in my laptop
Similar Messages
-
my iphone 4 will no longer connect to my Itunes since 7.1.1 update, itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected but itunes unable to see it
any Ideas cheersTry holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891
-
My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days
Hi Jpcbew,
The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system.
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
So long,
-Jason -
My iPhone 4s will no longer connect to my computer
My iPhone 4s will no longer connect to my computer. I recently converted to iOS6. I am not sure if problem started before or after conversion. It used to connect to computer (using XP professional) via hotwire but no longer connects. I tried connecting while phone was on and while phone was shut down. Neither works. I am not getting any indication that power is going to iPhone. I also unsuccessfully tried using different wires.
my friend using a good flaslihght, check your goldplated dataport conectors in the phone for corrosion/oxidation/dirt. most problems we see like this are because of bad/missing dataports. do you have a continuity tester?
-
My iPhone 4S will no longer connect to wifi. It is on os6. I've had it for 18 months
My iPhone 4S will no longer connect to wifi. The wifi button is greyed out. It is using io6. Like this for a week . Is 18 months old. what is warranty time in Australia?
There is a one year limited hardware warranty with all iPhones.
You can check your warranty by going to supportprofile.apple.com.
Try to restore the iphone as new without restoring from a backup. If that doesn't work, you're going to need a repair.
And if it's out of warranty, you will have to pay for it. -
my iphone 4s will no longer connect to internet via wifi if it is password protected. i have tried to restart the phone reset the phone reset factory settings tried from a distance nothing works. i have connected my mac book and iphone 5 with the same password successfuly but the 4s wont connect. i have gone back to other knowen connections and since resetting the factory settings it will no longer connect there either what should i do??
Settings > General > Reset > Reset Network Connections
Try again. -
My iPhone 5 will no longer connect via bluetooth to Fitbit Flex or wireless headset
My iPhone 5 will no longer connect via bluetooth to my Fitbit Flex aftering updating to ios 7. Apple phone support had me completely erase and set my phone up again as new to restart bluetooth pairing, then restore again through iCloud. Worked last night but same problem today. It also will no longer connect to my wireless headset in my car. Of course I'm now 5 days over my 1 year warranty as well. Any ideas?
Delete the pairing from both devices then pair them again.
-
I was doing OS5 help update iphone but now no longer connects to PC and iTunesdoes not see the phone
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?
the computer is a macbook pro, mac os x 10.6.08 and the ipod touch is ios 6.0.
the problem is that just updated the itunes on the computer and now the ipod won't connect because apparently the itunes on the ipod is not up to date but the iod is telling me that is is up to date, so i can't do a software update. -
my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges
yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute -
Hi I am having iphone 4S. Today while connecting to my laptop for regular update, my phone started rebooting and message showed error in rebooting. Now even though i connected to laptop which has internet connection, i phone OS booting still not completed
I have factory reset my phone twice.. I have disabled iCloud settings.. I looked up possible downgrading options.. which isn't possible. I feel as if my iPhone 4 was offered the update so I was forced to get another phone
-
my iphone wont turn on when connected to a laptop or pc,but when its connected to my charging stereo,its shows i need to conect to itunes but then after 10-15 min. it turns off.
Hi Monzairita,
Thanks for visiting Apple Support Communities.
If your iPhone only powers on when connected to a dock, and shows the "connect to iTunes" screen, start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best Regards,
Jeremy -
TS1398 My iPhone 4S will no longer connect to wifi. Please help
My iPhone will no longer connect to wifi. Please help! I've tried turning it off, restarting, etc.
settings - general - reset - reset network settings.
-
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
I am using an old iPhone 3 as an iPod touch. It's no longer connected to a network. I am trying to download apps while using a secure internet connection, however, it's not allowing me to do so. The message is gives is: "Cannot Connect to the Store" A secure connection could not be established. Please check your date and time settings." I'm confused as to how I can fix this. The time seems to be correct, and I'm not using public internet.... Any suggestions??
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
Maybe you are looking for
-
Time to upgrade to Xserve-Advice Please
Hi, I'm currently the default "IT" guy at my company. We are a small company without any kind of dedicated IT department. We started out 15-20 years ago with a single Mac and have grown throughout the years. We now have 16 stations with 4 of them bei
-
Using a single Content server for DMS and also for Archive link documents
Hi, We have Planned for a single content server for managing the documents in DMS, parallelly as DMS Standard SAP objects are not available for all SAP transactions, i have proposed for making use of SAP Archivelink funtionality to maintain the docum
-
Hello. I bought a used MBP which didn't come with the Apple Remote. I have a remote from my Imac desktop. I tried to pair it to the MBP according to the instructions, without success. The batteries are good, the unit works fine with the IMac. Any sug
-
Change Cell Color of JTable-Please Help
Hi All, I want to change the color of a Row in a JTable when i click on it. And After that when i click another row i want to retain this color and give another color to the second row. If somebody knows how to do this. Do Help Thanks in advance -Jee
-
I'm trying to make a small city simulator game. I have a two-dimensional table (40 * 40), which is drawn on a JPanel using small gifs. Every time when player builds something and the table changes, the program repaints the panel. The problem is that