My iPhone 4s is not importing my latest photos into iPhoto, though it opens iPhoto as if it were going to do it.

My iPhone 4s is not importing my latest photos into iPhoto, though it opens iPhoto as if it were going to do it. When I plug my iPhone into my iMac, it opens iPhoto, but then it does not import my newest photos. Any fixes? This used to work fine.

from Patrick Collins, answering the question on another stream (this worked!):
Re: To those with iPhone not showing up on iPhoto...
Sep 13, 2007 3:41 AM (in response to jared57)
I have experienced the exact same thing... I figured out a way around it, which seems to work every time. 1. quit iTunes
2. open iPhoto
3. unplug the iphone usb cable from the computer
4. turn your phone on, and unlock it.
5. plug in the usb cable. after about 10 seconds or so, iPhoto should prompt you with items to import. -p

Similar Messages

I have imported a jpeg photo into iPhoto and cannot get the Places map to let me fix a position on the map. It remains disabled for my photo. Checking out the Help file has not given any solution.

I have imported a jpeg photo into iPhoto and cannot get the Places map tp show. I have tried the Help file and the information was not helpful. Can anyone give advice here?

I am using iPhoto 9.1.1. When I select thephoto, then Places I get the window (Places to lookup disabled). When I hit theInfo button I get the size an JPEG notification, and Faces and Key words. The “reverse” of thepicture shows a window with Rotate, Hide, Trash etc.
When I select Places, get the Google worldmap, and this case a pin on Sydney Australia showing that eighteen photos arecorrectly placed. I am unable to make the connection to San Francisco wherethis particular photo was taken on a very modern camera.
Regards,
Theogt

My iPhone 4 can not upload the new photo into the photo stream automatically

As the subject, iCloud not work.

Same issue here. No automatic sync. All settings are correct, Iphone 4 was pluged but nothing sync over night. Manual backup works fine.
Thanks for any advice

I cannot import high resolution photos into iPhoto on iMac

iphoto shuts down when I try to edit a high resolution photo imported into the application.
these are scanned photos at a resolution higher than 600 dpi.

Sometimes it does not get imported, other times it does and when I try to edit with the quick fixes it crashes.
Below the latest crash.
The photo is scanned with a multifunction Canon MG6250 in color at the highest resolution.
In preview the photo is displayed well and editing is allowed, but with iPhoto crashes.
Thanks for any tips,
A.Becker
Process:         iPhoto [2829]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.4.1 (9.4.1)
Build Info:      iPhotoProject-701067000000000~10
App Item ID:     408981381
App External ID: 11126036
Code Type:       X86 (Native)
Parent Process: launchd [135]
User ID:         501
Date/Time:       2012-10-08 22:08:10.309 +0100
OS Version:      Mac OS X 10.8.2 (12C54)
Report Version: 10
Interval Since Last Report:          71315 sec
Crashes Since Last Report:           7
Per-App Interval Since Last Report: 23839 sec
Per-App Crashes Since Last Report:   5
Anonymous UUID:                      9DE68FB6-5438-1404-620F-369B6046F98C
Crashed Thread: 3
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** error for object 0x97d962f4: pointer being freed was not allocated
Thread 0:: Dispatch queue: com.apple.coreimage.CIImageProvider_isolation
0   libsystem_kernel.dylib                  0x9066f7d2 mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x9066ecb0 mach_msg + 68
2   com.apple.proxtcore                     0x020231c3 -[XTRunLoopThread waitForSynchReply:] + 110
3   com.apple.proxtcore                     0x0201236d -[XTThread sendLocalMessageSynch:destThread:] + 189
4   com.apple.geode                         0x010bbeee -[DGImageIOFactory cache:cacheStore:onFulfillRequest:intoPageRef:] + 643
5   com.apple.proxtcore                     0x0202e2aa -[XTCacheFactory cache:cacheStore:fulfillRequest:intoPageRef:] + 1128
6   com.apple.proxtcore                     0x0202cee0 -[XTCacheBroker cacheStore:fulfillRequest:intoPageRef:] + 65
7   com.apple.proxtcore                     0x020348f9 -[XTCacheStore newObjectForRequest:] + 497
8   com.apple.proxtcore                     0x0202c527 -[XTCache newObjectForRequest:] + 43
9   com.apple.geode                         0x010f516a -[DGCachedTileImageProvider provideImageData:bytesPerRow:rect:] + 904
10 com.apple.geode                         0x0109007b -[DGImage provideImageData:bytesPerRow:rect:] + 73
11 com.apple.geode                         0x010facee -[DGImageBackedImageProvider provideImageData:bytesPerRow:rect:] + 82
12 com.apple.geode                         0x010fb173 -[DGImageProvider provideImageData:bytesPerRow:origin::size::userInfo:] + 78
13 com.apple.CoreImage                     0x98373fd4 provide_tile(unsigned long, unsigned long, fe_bitmap_struct*, void*) + 168
14 com.apple.CoreImage                     0x983da4f0 FEUniformSizeTiledBitmap::retrieveTile(unsigned long, unsigned long, unsigned long&, unsigned long&, FETiledBitmapToken_s*&) + 272
15 com.apple.CoreImage                     0x983da213 FETiledBitmap::assembleBitmap(fe_bitmap_struct&, FEFormat const&, CGRect const&, CGRect&, FETiledBitmapToken_s*&) + 1183
16 com.apple.CoreImage                     0x9849f238 -[FEOpenCLContext(Buffer) _textureForBitmap:bounds:target:wrapMode:filterMode:buffer:] + 641
17 com.apple.CoreImage                     0x984a0b88 -[FEContext(Texture) textureForBitmap:bounds:target:wrapMode:filterMode:buffer:] + 351
18 com.apple.CoreImage                     0x983a3b83 -[FEBufferImage _createTextureWithContext:bounds:target:wrapMode:filterMode:buffer:] + 307
19 com.apple.CoreImage                     0x983a9086 -[FEImage(Internal) createTextureWithContext:bounds:target:wrapMode:filterMode:buffer:] + 294
20 com.apple.CoreImage                     0x983c65e3 FETexture::retainTextureObject(FETextureCache*, FEContext*, unsigned int, void*, void (*)(void*, CGRect, FEFormat, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*), CGRect const*, bool, fe_texture_object_struct**) + 461
21 com.apple.CoreImage                     0x983c7082 FETexture::newTexture(FEContext*, fe_texture_params_struct const*, void*, void (*)(void*, CGRect, FEFormat, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*), fe_texture_object_struct**) + 996
22 com.apple.CoreImage                     0x983cc2b7 FETreeNode::createTexture(FETreeContext*, unsigned int, unsigned int, bool, bool, FETreeTexture*, unsigned int) + 885
23 com.apple.CoreImage                     0x983ce76d FEApplyTreeNode::render2(FETreeContext*, FEShape const*, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*) + 719
24 com.apple.CoreImage                     0x983cbd5b FETreeNode::render_(FETreeContext*, FEShape const*, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*) + 151
25 com.apple.CoreImage                     0x983cbf23 FETreeNode::renderTexture(void*, CGRect, FEFormat, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*) + 69
26 com.apple.CoreImage                     0x983c6703 FETexture::retainTextureObject(FETextureCache*, FEContext*, unsigned int, void*, void (*)(void*, CGRect, FEFormat, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*), CGRect const*, bool, fe_texture_object_struct**) + 749
27 com.apple.CoreImage                     0x983c7082 FETexture::newTexture(FEContext*, fe_texture_params_struct const*, void*, void (*)(void*, CGRect, FEFormat, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*), fe_texture_object_struct**) + 996
28 com.apple.CoreImage                     0x983cc2b7 FETreeNode::createTexture(FETreeContext*, unsigned int, unsigned int, bool, bool, FETreeTexture*, unsigned int) + 885
29 com.apple.CoreImage                     0x983ce76d FEApplyTreeNode::render2(FETreeContext*, FEShape const*, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*) + 719
30 com.apple.CoreImage                     0x983cbd5b FETreeNode::render_(FETreeContext*, FEShape const*, void (*)(FEContext*, void*, FEFormat), void (*)(FEContext*, void*), void*) + 151

Nikon D50 - DO not want to upload photos into iPhoto

Hello, I have a Nikon D50 camera, and I do not want iphoto to open when I connect the camera to the computer. iphoto automatically opens and I would much rather just copy the files to my hardrive myself. How do I do this?

Welcome to the Apple Discussions.
In your Applications folder you have Image Capture. Launch it and open its Preferences. This is where you set what you want to happen when you connect your camera. You can set it to launch Image Capture, which you can use to download the photos from your camera to a folder of your choice. Or set it to open nothing, and launch the application of your choice manually.
Regards.

Importing photos into iPhoto from Hard Drive

Mike just downloaded our back up onto our newish Mac after our Macbook bravely went to it's grave in coffee. I'm now trying to import about 100 - 200G of photos into iPhoto from my hard drive. I really do not want to spend the whole time selecting and dragging these pictures. All that I read so far says that is the only way to get them off your hard drive. Some one please rescue me and tell me there is another way! Unfortunately I have already started a new photo album with pictures from my iPhone, so I can't just start a new album with these pics. Thanks for any help I can get. ~Kari A.

first off do not import an old library into iPhoto - it does not work
If you have an old library you simply drag it to the new computer and launch iPhoto while depressing the option key to get the select library window and then select it - repeat to select a different library
If you have just the photos (not =an iPhoto library) then simply drag the folder of photos to iPhoto
LN

Importing/exporting Moto V265 photos into iPhoto

Hi,
I just got a Motorola V265 cell phone. The phone have a small camera in it.
I'd like to know if there is a way to import the cell photos into iPhoto (by using an utility) ?
Also, since it is possible to put pictures on the phone as backdrop, I'd like to know if there is a way to take a picture from iPhoto and export it to the cell phone?
Thanks

I haven't found any possible way of doing it, so I take it it is impossible...

HT204022 How will i delete photos I have copied into a folder from my PC to my iphone that are not part of My Photo Stream?

Good evening everyone I need your help. How will i remove photos in an album i have copied into a folder from my PC to my iphone that are not part of My Photo Stream? tnx
cutebraveheart

See > To delete photos from your device

My MacBook Pro will not allow me to shut down it says it is still importing photos into iPhoto it also will not quit

My MacBook Pro will not allow me to shut down my computer. Their seems to be a glitch in the iPhotos. It says it is still importing photos into iPhoto. It will not allow me to quit either.

You could always hold down the power button to force the MacBook to turn off. This is usually a last resort step though, but if nothing else is working and you are sure it isn't importing photos then you might consider it.

Hello everyone, I can not with the latest update to iPhoto to add localitazion on the photos on my Mac. How do? Thanks

Hello everyone, I can not with the latest update to iPhoto to add localization on the photos on my Mac . How do? thanks

What have you tried?
What happened?
Error message?
What did it say?
Any info?

How do you import photos into iPhoto from an iPhone?

how do you import photos into iPhoto from an iPhone?

1 - with iPhoto open connect the iPhone to your Mac with its USB cable and import.
OT

Can't import photos into iPhoto

I have a Sony DSC W5 digital camera. For five years I have been able to import photos from the Sony camera into iPhoto. In the last two days I can no longer import photos into iPhoto. I get an "unrecognizable file" prompt. I can drag the photo files onto the Finder and view them there. The photo on the Finder has a .jpg suffix just as all the other photos in iPhoto. Anybody got an idea on how to solve this problem? Thank you.

get the photos off of the card and reformat the card using the camera format command
Can you import the photos from disk once you have moved them from the camera to the disk? If not try opening one preview and saving as to create a new file and import that
LN

Importing and Organizing Thousands of Photos into IPhoto

How can I import about 20 thousands photo into IPhotos and keep the logical organization?
I just buy a Mac Mini and I start trying to move my photos. These are organized in directories by dates with a customize description for the occasion ( …/YEAR/YEAR-MONTH-DAY + DESCRIPTION/)
I tried with few directories and I realized that in order to use IPhoto and keep the logical organization I will have to create and name about 500 albums manually and look for the photos for every album again one by one.
It sounds hard because the number of albums and photos.

There is a 3rd party application, iPhotoTool, that will let you select the top folder containing many subfolders and import all of them into iPhoto and create an album of each sub folder. That will save you a lot of manual work. Then all you need to do is create folders in the Source pane to organize your albums. Be sure to not allow duplicates each time it asks or you'll get duplicates in many of the folders. You'll be asked for each subfolder above the lowest but that's lot easier than manually finding and dragging each folder into iPhoto's Source pane.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I am not able to duplicate photos in iphoto. How can I accomplish it.

I am not able to duplicate photos in iphoto. I have tried the two finger click and then went to duplicate... no luck. Went through photo and duplicate... no luck. Used command D... nothing. How can I fix this?

Can you import new photo's?
If not that means something is wrong with your iPhoto files someplace or possibly your .plist file.
As you know, you can right click "show package contents" of the iPhoto Library and get a copy of your Originals out. I would do that immediately so you have a copy safe out of iPhoto's clutches, stick them on a external drive, along with all your other files just in case.
Then next download and run ALL of the free OnyX initial checks, cleaning and maintenance tasks (except the log files) and reboot at the end (in between tasks reboots can be canceled)
http://www.titanium.free.fr/
What this will do is sort of check things out, then clean out all your caches so they rebuild, repair permissions and other tasks that the computer normally does itself, the machine may act a bit slow until the caches and Spotlight are rebuilt, sort of a nuclear cocktail of fixing everything.
If OnyX gives any warnings then state them so here please, you could have a more serious problem that will need addressing like a Repair of your boot drive or failed SMART status etc.
If OnyX comes up clean, and your still having trouble with iPhoto, you can choose to remove (from Pictures), rename and/or archive the iPhoto Library, reboot and restart iPhoto to create a new iPhoto Library, then in iPhoto, import a copy of your Originals from backup.
You can also delete the com.apple.iphoto.plist file from your ~/Library/Preferences folder, reboot and restart iPhoto, reset your preferences again, sometimes that clears issues up.
If your STILL having issues with iPhoto, log into another user and try iPhoto there, if no issues then it's something unexplained in the other user. You may want to just switch users transfering files via the Users/Shared folder.
If your having problems with iPhoto in the other user, the program iPhoto ITSELF, is likely the cause. You can resintall it from the bundled 10.6 install disks, or simply install 10.6 again (does a overwrite of exisiting OS X and bundled iLife programs) and immediatly Software update until clear to 10.6.8. This method also kicks out kext and other OS X installed "hacks" from other third party program installers, you wlll need to run those installers again.
If you upgraded 10.6 over 10.5, then you will need to use Pafacist to extract iPhoto from the 10.5 disks, as the 10.6 white disks doesn't have the free iLife, only the grey disks do.
There are also some tricks to rebuild the iPhoto Library, I forget what they are, but if you ask in the iPhoto forum you will get a answer from several of our regulars who are familiar with the subject better than I am.

Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open images directly from iPhoto. Before I installed PS I was not able to edit photos in iPhoto 11. Nothing

Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. Glenys

This may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

My iPhone 4s is not importing my latest photos into iPhoto, though it opens iPhoto as if it were going to do it.

Similar Messages

Maybe you are looking for