My IPhone 4s just started flashing the apple logo and will not turn on.
My IPhone 4s just started flashing the apple logo and will not turn on. And recently the charge indicator is not accurate show very little charge even when it has been charging all night. Any thoughts?
Update on this issue - I got the phone to restart by forcing a restore with Itunes. seems to be limping along again.
Similar Messages
-
hi i am having difficulty with my iphone 4s it has been on charge for a number of hours but is just flashing the apple logo continuously i have tried to reset but nothing seems to work can anyone help me please
What is a hard reset? There is nothing in any of Apple's documentation that refers to a hard reset.
There's a reset, a restart, and a restore.
Please explain EXACTLY what you did. -
My iPhone 5 is stuck on the apple logo and will not restore
MMy iPhone 5 is stuck on the apple logo which flickers and then fades slightly before resetting again to the apple logo. It will not restore.
This might be hardware related and you'll have to get your phone checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
You can also contact Apple Support and talk to them. They can check the battery online.
Or visit this page to do that: iPhone - Contact Support - Apple Support
Click on Apple Support, then on ->Battery, Power &Charging ->Battery questions and troubleshooting, and follow the instructions. -
My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter
If you are in Hong Kong, go to Digital Trade, 1/F, Sincere Plaza, Argyle Street, and it will cost you 120-150HKD, but before you go check that your power button and home button are working correctly, if not press as hard as you can, hope this will help.
-
My iPhone is flashing the apple logo, and then it turn into black.. And after that, it repeats.. HELP ME
Hello LaugesenDK
Follow the steps in the article below to put your iPhone into recovery mode and then you should be able to restore your iPhone. If you have a back up you can put your back up to get your data back after it completes it restore process.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
My phone is blinking with the apple logo and will not start
my iphone is blinking the apple logo but will not load or turn off?
my phone is blinking with the apple logo and will not start
-
My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?
My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?
I've got the same problem.
I wanted to download the new itunes version for iphone but it got stuck. I had no choice but disconnecting my iphone. Then I couldn't sync it anymore.
I switched off my phone by holding down the sleep button but it has never successfully switched off. The round thing still turns.
I've tried to connect it back to the itunes. This is the error message I get: itunes can't connect to the iphone. Code 0xE8000065. I tried to find out what error message this is but the apple support site I saw didn't mention this error code.
Can anyone help? Thaaanks! -
I went to upgrade my software on my phone from 5.01 to the lastest version. now all my phone will do is blink the apple logo. it will not turn on or off. What can I do? Even when I plug it into the computer, the computer doesn't see the phone.
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore -
IPad 3rd Generation just started flashing the Apple logo
Searching the net for this issue, I find several discussions that recommend to put the device in recovery mode. The steps to put it in recovery mode are to turn it off. The standard way with the red slider does not work. Using both buttons to turn it off appears to work. The screen goes black.
The next step says to connect the USB cable to the computer but not the iPad. My computer is a Macbook Pro.
Next, I am to hold the home button, and while holding it, plug in the other end of the USB cable. Keep holding it until the iTunes sync screen displays.
When I follow this procedure, what happens is that the iPad reverts to flashing the Apple logo.
So what was I doing when the problem first occurred? Well, first I was trying to figure out how to get iTunes University content from my iPad onto my computer. Nothing I tried seemed to work. Yes, my computer is authorized. Yes I selected the transfer purchased content.
After none of those steps seemed to work, I decided to first make a backup. Good thing I did, considering my current predicament. Next, I enabled syncing of iTunes University. This warned me that stuff would be deleted from the iPad. OK. I expected that. That's why I made the backup.
I really don't know what the result of that was because I went off and did something else while the sync was taking place.
Meanwhile, since my iTunes University stuff was going to disappear, I looked into how to download it into iTunes on the computer. It took a while to figure out, but I think I figured it out properly. Anyway, while content was being downloaded into iTunes on the computer, that's when I noticed the logo flashing.
Is it possible that downloading content into iTunes on the computer could have been interfering with syncing the iPad and that's what caused the problem? Anyway, what do I do now?Update on this issue - I got the phone to restart by forcing a restore with Itunes. seems to be limping along again.
-
My iPhone 4s is stuck on the apple logo and won't turn on
Recently I updated my iphone 4s on ios 7, not through itunes. but through wifi. the update is done but I'm stuck on the apple logo thats loading before it turns on. It like hanged. I've been rebooting it but nothing happens.. it Just went back to the apple logo and show that it's loading but it's barely moving!!!! It's been 5 hours and I really need to switch my phone ON!.
PLease helppppp! anyone!!!!!!Exactly the same thing is happening with my 4s !need help asap!!
-
my iphone 4 won't turn back on past the apple logo it keeps going off and on. help
Exactly the same thing is happening with my 4s !need help asap!!
-
i have a iphone 3g 16 gig is not bypasssing the apple logo or connecting to itunes at all i was wondering is there away pass that what can i do to get my phone back operating again it is not jailbroken so please help????
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
Ipod only showing the apple logo and will not do anything else. 1st GEN
my ipod will only show the apple logo when plugged in to my computer i have a dell running xp but i have tried other computers and it will not do anything but show this symbol. my computer does not recognise that it is plugged in. ive tried the apple support fix-it but it does not do anything period. the buttons do not work when plugged in or not. the only thing it does is light up when plugged in. my other ipod works perfectly no problems so this leads me to believe that its not the computers i have used. just think the ipod has had it
Mine did the same thing last week after trying to update it via wi-fi. I then spent 11 hours Sunday updating my itunes on the laptop then restoring my ipod. Now all it does is beep as if it is just plugged in and flash the white apple logo. It beeps constantly. My computer at first didn't recognize it, then it did but said I needed to unlock it,(since I can't get the home screen up, I can't.) and now it doesn't recognize it at all. I've tried both computers.
-
My i phone 3gs was hang with the apple logo and its not booting
my i phone 3gs was hang with the apple logo and its not booting can any one say me how to fix this .
my phone is blinking with the apple logo and will not start
-
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
How to find out the size of files transferred over the SQL * Net?
I am trying to test the Advanced Compress (AC) for 11g Data Guard. When the AC is turned on, the archived log files are supposed to be compressed on the primary database server and sent over SQL*Net, then decompressed on the standby db server. We wil
-
User Authentication in a folio based App
Is Entitlement the only method of authenticating an app user in a folio based app? I'm looking to store a SSO id or token for use with the publications not necessarily for downloading additional publications, but for accessing additional content with
-
Regarding FM "SELECT_OPTIONS_RESTRICT"
Hello All, I am using the FM "SELECT_OPTIONS_RESTRICT" for restricting two tabs (For Exclusion) on the selection screen for selct-option and it is working fine. but the problem is that if i want to use this restriction for two select-options then it
-
Hi: I got a core dump on _smalloc. Is it due to memory corruption on my application ? The frame stack on gdb is attached: #0 0xff0456c8 in _smalloc () from /usr/lib/libc.so.1 (gdb) bt #0 0xff0456c8 in _smalloc () from /usr/lib/libc.so.1 #1 0xff04570c
-
Bonjour, Mon problème n'est surement pas très compliqué mais je n'y arrive pas soit par manque de connaissance sur LabVIEW soit parce que la version que j'ai ne me le permet pas. Je souhaiterais générer un train d'impulsions (2ou3 impulsions seulemen