My iPhone 4S quit working.

My iPhone 4S quit working.  What should I do?

The phone was working and charged about 50% when I went to bed last night.  When I awoke this morning and hit the button, nothing happened.  I thought maybe the charged had gone to zero.  I put the charger in and checked the phone about 20 minutes later and the phone was still dark.

Similar Messages

  • HT1688 my Iphone 4 quit working.  It will not recharge and it was not low on charge when it quit.  It was sitting on a table. I checked the time and then it never worked again.

    My Iphone 4 quit.  it has a charge.  it was on a table.  i checked the time and it never came on again.
    Please help.
    Sharon

    Hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If it hasn't appeared after 20 seconds of holding charge it for 15 minutes with the wall charger and try again.

  • HT4528 my Iphone 4s quit working and it is hot!

    My phone quit working.  It seems to be getting hot off and on.  How do I contact apple to get my phone replaced since I have applecare?

    An intelligent person would start with the "Contact Us" link at the bottom of every page of the Apple website.

  • ITunes 11 home sharing with iPhone not quite working

    This morning I updated iTunes 11 to the newly released iTunes 11.1. I never could get home sharing to work with my iPhone 3GS (iOS 6.0.1). It would start to download the library information and then just stop. I used home sharing all the time so I was eagerly waiting for the fix many people seemed to need.
    So...Now getting the library information seems to take a long time--5 minutes or so, but it does run to completion. But, my lists of Artists and Albums are incomplete. I haven't done a lot of testing but it seems that all of my tracks are listed under Songs, and all of the references in my Playlists open the correct tracks. For example, Charlie Musselwhite is not listed under Artists. His album One Night in America is not listed under Albums, but the song Blues Overtook Me is listed under songs and appears in the Playlists where it belongs and clicking it there plays the correct song with the correct album artwork. Once I'm playing the song, I can switch from the artwork to the album list and all the album's songs are there and are playable.
    I haven't tested every song, but I've done enough to believe that all my tracks are accessible, even though only about 10% of the albums and artists are listed properly.
    BTW: I believe that the Album and Artist lists are the ones I would get if I changed iTunes to share only selected playlists, but I haven't bothered to prove this.
    What was a prohibitive problem has been made into a minor annoyance, but in case anyone form Apple reads this, let me say this. I have been an Apple user and fan from long before Apple made the first iPod or iMac, but I am incrasingly disappointed with the dumb things Apple now releases. In the past I never thought twice about updating the the latest version of anything, because whatever Apple released worked, and if there were a few minor bugs, new software never, never, never went backwards.
    Booooo, Apple.
    From now on I will be letting others do your beta testing for you while I continue to use maps that get me where I want to go and applications that work as advertised without drawing me into spending hours getting back to where I was before an upgrade. The fact that it is no longer possible to revert to a previous, properly working version of iTunes has cemented my feeling that I will remain safely behind the leading edge.

    just found it out after playing around to get itunes 11 to look like the older version go to view ( TOP LEFT )
    and click on show sidebar and then click ON SHOW STATUS BAR ... Then go to file and sign out of home share and then sign in again ... thats it and your import and sttings and other boxs will reapear ...REMEMBER TO REPEAT THIS ON ALL COMPUTERS THAT ARE RUNNING ITUNES .........HOPE YA WIFE IS HAPPY ..MINE WAS ....

  • My iphone mic quit working.  If I buy apple care, will apple send me a temp phone will mine is being repaired? Will it be sent before I send in mine or will I have to go without a phone for a bit?

    Do I have to go without a phone if I send mine to apple for repairs?  Can I buy applecare and apple will send me a temp phone BEFORE I send mine in?

    "Is there anything I can do?"
    Yes, you can exchange the handset for a refurbished out-of-warranty product for £216.44 (includes shipping + VAT).  Treat your objects like women - with love, and respect.

  • Iphone 3gs quit working.  Can't slide button.  It was bouncing and then froze.  What can I do?

    The images started bouncing a little.  The phone then froze.  I could open it through the camera option, but it would just start bouncing again and lock up.  I pressed power and home button to restart it, but no help.  I updated it, but no help.  In fact, the camera option while locked doesn't even appear now.  Any thoughts as to how I can fix this problem?  Thank you!

    I'm having a same problem, taking my phone to genius bar tonight. Is there any virus going on??

  • IPhone does not work with IPOD Dock to select next song / pause - play

    After using the iPhone at the gym, the IPhone quit working using the remote for the Docking station to navigate to next song nor pause / play. Suspect Iphone connector....
    Also the iMuffs Headset bluetooth adapter that plugged into the iphone connector quit working. Tested iMuffs bluetooth connector on another iPhone and is still functioning.
    any ideas?? clean connector?? short?? service??
    Note, the iPhone still syncs with iMac via docking port (USB). So the connector is not totally bad.
    Message was edited by: java_boy
    Message was edited by: java_boy
    Message was edited by: java_boy

    Have you tried a reset...and if that doesn't work ..a restore? Back up your phone before you restore.

  • I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

    I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

    bjorth wrote:
    apparently I have just an iphone 4 not 4s, so thank you.
    It does seem rather odd that an app that was acquired thru itunes would quit working once it was incorporated into the device for all users. oh well it was probably free or $.99 when I downloaded it.
    I would think that they were just testing it to see how many people would use it.  But you might want to write a polite letter to Apple requesting a credit for the purchase price of the no longer supported app.  That seems to be the least they could for one of their 'alpha testers'.

  • Dictation suddenly quit working on my iPhone

    dictation suddenly quit working on my iPhone. Help

    I had the same problem, dictation suddenly stoped working on my new IPhone 5.
    I tried the fix from Linda Swenberg and it worked.
    Turn Off SERI in General settings
    Power down the phone ( press and hold the on/off buttton)
    Turn it back on
    Turn SERI back on
    Wait 3 minutes
    It then worked
    Thanks Linda

  • My iphone quit working I am getting a new one under warranty.  How do I know if my contacts were backed up

    My iPhone quit working and I am getting a new one, how do I know if my contacts ere backed up?

    Did you have it set up to sync Contacts to iCloud? If so you can log in to https://www.icloud.com and see that they are there.
    If you just backed up to iTunes or iCloud then there isn't a way to visually verify the contacts other than doing a restore. One exception to that is that if you used iTunes for the backup, there are 3rd party extractor programs that can display the contacts.

  • I have an iPhone 4S, and just now the sound quit working. It works with the headset and if I put it on speaker, but not anyway else. The music won't send sound out, the purine calls do the same. I reset to the original settings, nothing works.

    I have an iPhone 4S, the sound quit working. I have sound in the headset and if I put the phone on speaker, I've reset to original settings, tried several options. Nothing works to resolve the options. Please help.

    Hi there Wacjude,
    I would recommend taking a look at the article below for some speaker and receiver troubleshooting steps.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Hope that helps.
    Griff W.

  • I have an iPhone 5. I got it just over a year ago and the power button recently quit working. Since ive had it for over a year, can i take it in and have it replaced or fixed?

    I got my iPhone 5 a little over a year ago, and my power button recently quit working. Since ive had it for over a year, can i still get it fixed or replaced?

    Wow that is so unlucky. If I was you I would try talking to someone at the Apple Store, explain your situation and don't be shy to shed a tear or too. Its just a shame 3 weeks after your phone getting hardware problems. I know people will say, oh buy Apple Care but I feel ya and I know adding that extra money in the beginning feels pointless and expensive.
    Worst case scenarion like I said you will have to pay Apple 269 for them to swap phones. Or if you have any nerd friends have them fix it for you. Its a tedious repair the way the power button has some weird hinge that needs to snap on and ribbons are so thin. I do not advise for you to attempt to fix your self unless you don't care if you break it completely.
    Alternatively you could just turn on Assisitive touch on accessibility and use that. That way you wont need to pay anything to fix your phone and wont need to take it apart either.

  • IPhone 5 update 6.1.3 speaker quit working after update

    After update 6.1.3 on my iPhone 5 my speaker quit working. Did a restore still nothing. Headphones work just fine. No speaker phone or music.

    Plugged into iTunes - told me to update to 6.1.3.  Did its thing... and no sound from speaker.  This happened immediately following the completion of the update - I didn't even pick up the phone.  ***!
    Headphone works fine, but I get zippo from the speaker except an occasional crackle.
    Turned off BT, reset settings, plugged and unplugged the headphones (to see if the sensor was stuck), rebooted the phone, did a restore to factory, everything I could think of.  Speaker is dead.
    Don't  perform this update - something's wrong.
    Now I've got a useless piece of junk and I keep missing incoming calls.  Nice job Apple!

  • My iphone quit working and says to restore from itunes. Hope I havent lost anything? How do I get started?

    My iphone quit working and only has an apple and a message to restore from itunes. Will I loose texts and photos? How do I restore my phone?

    You are in a recovery mode follow this article http://support.apple.com/kb/HT1808
    If you have a backup you can restore your contents by following this article
    http://support.apple.com/kb/HT1414

  • HT4623 Wi-fi quit working after i updated the iphone. What should i do?

    Wi-fi quit working on iphone 4s after os update. What should i do?

    It would seem the printer has lost the network information since it is flashing and power cycling the printer did not work.
    This means it needs to be treated as a new installation to get it back on the network since it is a USB to wireless setup.
    This will require a computer on the same wireless network and a USB cable to send the network information to the printer.
    Uninstall the printer completely from the system.
    1.  Install the printer again and choose Network when prompted for the setup type.
    2.  Connect the USB cable when prompted.
    3.  Follow all the prompts during the installation and disconnect the USB cable when prompted.
    At this point, it should be back on the network.
    The newest software can be found by clicking on Support & Drivers at the top of this page and entering your printer's model for software and driver downloads.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for

  • Add Component during runtime in swing

    I want to create applet which add any component at runtime. I have done this but there is one bug. When i add the components, they are not display in applet window. But as soon as i change the size of the or minimize or maximize the applet window it

  • Query link Freight Charges RDR2

    Hi Experts, I have did the queries as below but i have a problem to link to RIR2 which is Freight charges. I have tried after i linked the result is no correct. Please Kindy advise. SELECT T0.LineStatus AS 'Row Status', T1.DocDate AS 'Posting Date',

  • Modify the selection screen for the transaction VF04

    Hi all, My requirement is as follow . I need to modify the selection screen (1000) in such a way that I need to add three more fields to te existing selection screen and make some check boxes checked by default which are unchecked . I have found out

  • '&' character and BI Publisher Intergration

    Just wanted to post this for others when they start using BI Publisher and APEX.. I have a number of reports in APEX that we are using BI Publisher to produce printed output. In one of the reports I had a & in the region title in APEX. When BI Publis

  • SCCM HARDWARE REQUIREMENT

    Hi, I am very new to SCCM. Currently I would like to setup SCCM for one of my sites. Around 50 users, may increase to 100 users in 2-3 years. May I know what is the hardware requirement for this? Will use it for asset inventory and update/software de