My iPhone 4s seems to be running slower after the os6 upgrade. Anybody else having this problem?

My iPhone 4s seems to be running slower and crashes after the ios6 upgrade.  The power off button does not appear when I try to power it off, the screen just goes blank.

Mine seems to be running faster after the upgarde although i am facing battery drainage. Best you do a hard reset to the phone and this should solve the issue. Apparently if you upgrades via OTA, there were some issues. hope this helps

Similar Messages

  • Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?

    i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

    Charger60 wrote:
    i
    Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?
    No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
    Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

  • TS1702 problem with updated find my iPhone app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem?  I got the app as a regular update to my existing FMi app w

    problem with updated find my iPhone (FMi) app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem?  I got the app as a regular update to my existing FMi app which worked great.

    The problem is being reported in the news media, yes. Apparently someone at Apple jumped the gun and uploaded the update before it was ready. They'll probably issue another update shortly, I would expect, but you can go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store. If you have a backup copy of the older version of the app, remove the newer version, restore the old version to iTunes on your computer, and resync.
    Update: Well, that was certainly quick. As of a short time ago, various sites are reporting that the Find My iPhone app is no longer displaying the previous error message. If it still is for you, delete it from your iPhone and re-download from the iTunes Store.
    Regards.

  • Installing IOS 8 on my iPad slowed all the functions significantly, anyone else have this problem?

    Installing IOS 8 on my iPad slowed all the functions significantly, anyone else have this problem?

    There are many people experiencing the same with the iPad 2 and the iPhone 4S.  The hardware in these devices is barely adequate to run iOS8.  You can look for obvious menu settings (like turning off or minimizing background app refresh) but there is no getting around the fact that these two devices are barely up to running iOS8.

  • IPhone 6 plus still can't download or update apps, anybody else having this problem?

    MMy iPhone 6+ is still not downloading apps or updating them. Have done everything is anyone else having this problem?

    Actually after Lawrence told us of his connectivity problem I held the home and off button down, I've done that before, but maybe the network is working again? Bingo, movement and some apps are moving. Like him some are still saying they cannot connect at this time. So it's starting to work again...thanks you guy's there's no place like home.

  • Ive updated my iphone 4 to ios5 and the music will not play atall even though its all on the phone is anyone else having this problem?

    Obviously Ive had the same errors originally but the software has updated fine now. But for some reason the music on the phone will not play atall! with or with out headphones. It seems too just be staying at 0.00mins and even if I fast forward it it just stays at the particular mins fast forwarded to. Has anyone else had this problem?

    Similar symptom here.  I gathered from other threads that by removing all the songs and re-sync them back to iPhone4 would sort the problem!  I tried with one album and it seemed to have work fine!  So I removed all the songs and transferred them back again!  However, I could not launch Music app any more!  Click on Music and it just stopped, i.e. could not be launched!!!
    However, I noticed that I could still play all the songs through headphone control.  But if you play without the headphone plugged in, no sound comes out of the phone speaker!!!!!
    Aarrrgggggghhhhhhhhhhhhhh!!!!!!!!
    Apple - surely you must seriously look into this and come out with resolutions by now!  Would SJ step in by now????? RIP SJ!  Apple, in fact all of us, miss you - with diferent reasons !!!

  • TS2755 I am having to restart my iphone 5 nearly everyday to complete imessaging.....anyone else having this problem??

    I am having to restart my iphone everyday to complete imessaging.  Anyone else having that problem??

    yes it isn't working with iOS7, you need to go into settings>celluar>reset network settings and then it works, down side is all wifi networks you have saved you'll need to add the passwords again for the secure networks, extremely frustrating.. not to mention it forces you to send via text messaging which then gets added to your cell plan with your provider.. sure hope they fix it soon, this is very Windows like upgrades with Apple

  • Hello i can't use any apps on my iPhone and it keeps asking me to log on to iTunes anyone else having this problem

    since this afternoon i can't use any of my apps on my iPhone it keeps asking me to log onto iTunes so i log on to iTunes and it just sends me straight back to log onto iTunes so tried to log onto iTunes on my mac and i have error code -50 anyone else had this issue

    As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
    https://www.apple.com/support/systemstatus/
    Edit

  • Why aren't my iphone emails being sent from my default email address. Is anyone else having this problem?

    I have my iphone email default setting to my primary email address however when I send or respond to emails they are sent from my secondary email address even if I de-activate the secondary email address. Does anyone have any suggestions on how to correct this?

    Are you sending from All Inboxes, or the inbox for the account the message was received in? I cannot duplicate your problem with either approach; my mail is always sent with the FROM address of the account that a Reply came to, or, for a new message, the inbox that was open at the time. It doesn't matter which SMTP server I use.
    When composing a new message or a reply tap once on the BCC/FROM field; you can then tap on the From address and choose any of your email addresses for the FROM field. Does this let you change it?

  • My iPhone 4 has become dead slow after the iOS upgrade. Any pointers pls?

    Hello All,
    My iPhone 4 has become dead slow after the iOS upgrade. I use the phone for business purpose and it has become painful to use the phone becuase of the poor performance.
    I don't want to change phones based on iOS releases. Any suggestions would be appreciated.
    Thanks,
    Amrit

    How to update my iPhone4,iOS 7.0.6

  • Since installing OS X Mavericks photoshop runs so slow I can hardly use it....anyone else having this problem?

    since installing OS X Mavericks photoshop (CS6) runs so slow I can hardly use it.  Is anyone else having this problem?

    The post above is only partially true. There are many people that have install Mavericks over the top of a older version of OS X and haven't experiences any problem. Then of course there are others that have experiences many different problems.
    Do you have a Time Machine backup from before you installed Mavericks? If you do, and you should, you can restore your system from that TM backup and then do a clean install of Mavericks on either an external drive or a second partition on your internal drive then use the Setup assistant system to copy over your setting files and apps from your older OS X version. You can then TEST that clean Mavericks install for any compatibilty problem before you commit to it totally.

  • What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

    What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?  PC running XP and using the USB to communicate with the DAQ and driver boards.  Application generated with 2010.
    Thanks

    Hello,
    Usually default property is checked 
      system property -> devices ->usb root -> power management -> allow system to switch off device
    Hope this help
    Regards
    Tinnitus
    CLAD / Labview 2011, Win Xp
    Mission d'une semaine- à plusieurs mois laissez moi un MP...
    RP et Midi-pyrénées .Km+++ si possibilité de télétravail
    Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
    Don't forget to valid a good answer / pensez à valider une réponse correcte

  • Purchased my computer just before new ones came out in Oct. It runs slow and shows Gray screen sometimes when I open it. Anyone else having this problem?

    I have a new but 2010 model. It operates very slow and has gray screen occassionaly. One store said it's "safe sleep", the other graphic board. Is anyone else having this problem with computer only 4 mos. old?

    Your problems may be caused by software or hardware, including the gray screen and the slowness.  The intermittent gray screen is a puzzler and probably is hardware.   TUSL2C’s diagnosis may be right on the money.  A question is how to isolate it to HW or SW that so you can get good service? 
    The obvious cheap and easy fix is to replace that cable but I don’t think you can do that  because it is under warranty.  There are other ways to isolate the problem that won’t void the warranty.
    If the disk turns out to be healthy and it continues to boot to a gray screen then that will be a sign that internal hardware, other than the disk, is to blame.  Since they are blaming it on software we will be able to test it with a pristine OS X installation that has no 3rd-party software to blame.
    > They are calling it "Safe Sleep Mode" and that happens if I don't use the machine within 4 hours.
    The machine should go to sleep and wake up almost instantly every time without a gray screen.  If you can demonstrate the problem reliably by putting it to sleep and waking it up then that will be most useful.  We will show it failing on pristine OS X software without 3rd-party mods to prove it is an Apple problem.  Similarly if you can reliably show the gray screen from a power-on boot that will help.
    My first question is do you have a current Time Machine (or other) backup?  If not you should create one before we get to steps that could stress the disk.  If it is a faulty cable or a faulty disk then the system could stop functioning at any time.  It is always prudent to maintain a current backup and especially important when the system is sick.  If you do not have a Time Machine (or other) backup then post back for instructions on how to create one.
    In the mean time please download and run Etrecheck and post back the results.
    http://www.etresoft.com/etrecheck
    This will indicate possible software compatibles and other details that may be helpful in a diagnosis.
    Also run disk diagnostics with Disk Utility.  This will check if the disk and filesystem are healthy.
    From the Finder, pull down on the Go menu to Utilities.  This will open the Applications > Utilities folder.
    Then run Disk Utility.
    Click on the upper left disk icon.
    Does the S.M.A.R.T. status say “Verified”.
              If not the disk/SSD is unhealthy and needs to be replaced.
    Click on the icon indented below, usually called “Macintosh HD”.
    Verify Disk.
    If it finishes with a green “OK” message then all is well with the disk.
    If it shows errors in red then you may have found a problem.
    Click on Repair Disk Permissions.
    It will give lots of messages in black and white, which are OK.
    If it gives any messages in red then there is an issue to address.
    It will be useful to have some test that shows the slow speed that uses standard OS X applications such as Pages, Numbers, Presenter, iTunes, iMovie... or even just the Finder opening windows or starting applications.  We can then use that test when isolating the source of the slowness.
    How many seconds does it take to boot from power-on to either the login screen or the Finder is up?  Please time that.  It is a good speed test.  If it is over a minute then something is wrong.
    One way to isolate the issues will be to sandbox it using another disk to test what happens with different software on different hardware disks in different locations.  That will not void the warranty.
    But before going there or proceeding further let’s look at the Etrecheck and Disk Utility results, ensure the system is backed up, and then try some other standard tests.

  • The iPhone 4S battery runs down very quickly.   Does anyone else have this problem?

    The battery in my new iPhone 4s runs down very quickly.  Does anyone else have this problem?

    Location services is NOT running all the time, only when the arrow appears in the message bar. It is not a major consumer of power unless you are actively using it (such as using the Maps app), and even then it is a minor factor in battery life; loading maps is the big user of power in the Maps app. And turning off Location Services defeats Find my iPhone.
    There are only 2 heavy battery consumers, cellular data and interactive games. Everything else (bluetooth, location services, WiFi, etc) are tiny in comparison to these and will not make a significant difference in battery life.

  • After updating my 4s to ios6, I'm having the same problems with wi-fi switching to cellular on it's own and running up my data usage.....anyone else having this problem?

    After updating my 4s to ios6, I'm having the same problems with wi-fi switching to cellular on it's own and running up my data usage.....anyone else having this problem?

    The iPhone is DESIGNED to switch to cellular data when asleep, unless it's connected to a power source, in which case it will stay logged onto the WiFi network.  iPhones have ALWAYS behaved this way.
    Either turn cellular data off at night, or leave your phone connected to a power source to continue the WiFI.

Maybe you are looking for

  • Obiee 11g installation problem : Error in configuration

    after completion of installation in configuration two components got failed opmnctl reload and opmnctl start core application obiccs1. what is this two components ...can anyone explain. helps will be appreciated. thank you.

  • Process order settlements not flowing into BI for Inventory

    Hi, I built a cube for inventory based on the standard extractors to generate MAC values. I have three MAC reports, each for daily, weekly and monthly. The reports give the right values at the at the month level , but  whenever there is a settlement

  • Aperture 3 synchs photos to iphone in wrong order

    When I synch my photos to the iphone from iphoto they show in the correct order by date. When I import this library to Aperure 3 and synch this one to the iphone they are all in a random order. How can I set them to be sorted by date?? They show in t

  • SWFLoader with a transparent swf file

    Hello: I am loading an embeded swf file with SWFLoader using actionscript 3 in Flash Builder 4.5. When I load this swf and set "wmode" to "transparent" in HTML, it works as expected and you can see the background color through the swf object in HTML.

  • Moveable Column Seperators Property

    Am I missing something or is there no property to control if there are "Moveable Column Seperators" on a Multicolumn Listbox?  To be clear I am not looking to programatically control the column width, I want the user to have the ability to move the c