My iphone 4s sometimes becomes very slow if i am switching from an app to messages etc. what could be the problem
My Iphone 4s recently has become quite slow, i am using the newest ISO 6.1.2 and i have 8.5 GB left on my phone. When i have an incoming text message or open up an app my phone becomes slow even if i am scrolling from one screen to another this occurs. I barely have any apps on my phone, and really have no idea what this could be from, if you have an ideas on how i could fix this please help!
thanks
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Similar Messages
-
I was trying to figure out why there was a cricle with a lock image in it on the top of my phone , so i was going through settings and couldnt find anything that was out of ordinary .so then i was trying to make room for a software update.The only thing i changed was was putting the little on screen help button. Then phone frozen after i was going through settings again to figure out the cricle and lock image on my home page. Then after a cetain amount of time, When screen time went out it wouldnt let me turn back on screen. But it will make noises from calls and texts and ect still when they come in. But it will not light up when calls or texts come through or notifications. It wont light up when i try to unlock it and or change the volume settings. My screen is blank and black but is still making sounds as if it was still on and working with no picture. Front camera still takes pictures when you hold down top and middle buttons but still not image on screen. Is there any suggestions that i can do myself or do you think i need to take it in myself to have it fixed?
Thank you so much,
Grace Wilson
<Email Edited by Host> .A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?
Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow? -
I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?
Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data. -
My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.
I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees). -
I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972 -
My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?
We can't know if there's a "fixture" because we can't examine your phone. But Apple can. Make a Genius Bar appointment and get your phone evaluated.
-
My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?
You said "reset," so Meg assumed that's what you did. But "reset" is not a button; to reset the phone you must hold the HOME and SLEEP buttons at the same time until an Apple logo appears. You may have to hold for up to 30 seconds, and if the battery was completely drained, you will have to restore iOS using iTunes on your computer.
-
Hi Guys, my iphone 4 showing bad retina display and showing horizontal lines? What could be the problem???
Could be that your screen is damaged or dying. Only way to know is to bring the phone to Apple for evaluation.
-
My iPhone 5s is plugged in. It does not show that it is charging but gives the alert "ding" sound every 15-16 seconds. Does anybody know what could be the problem?
It sounds like it starting to charge, then suddenly stops over and over. This can happen if the cable or adapter is bad or if your charing port has an issue.
Try using a different cable and/or wall adapter. If the issue continues, it's probably the iPhone. If it does not continue, then it's the cable or adapter. Continue to swap to see what's bad.
If you don't have another cable or adapter to test will, take your iPhone and your cable/adapter combo to an Apple Retail Store or Apple Authorized Service Provider. They can help you narrow the issue down and provide service as indicated. https://locate.apple.com/country -
CNA becomes very SLOW after adding new switch to cluster
Added a CAT-2970 to my cluster and now CNA is acting very slow, especially when I attempt managing the new switch. I am still below the 16 node cluster limit. I did initially find a CRC on the new switch trunk port int. and noticed that it came up as Dynamic Auto/ISL and the core was at Dynamic Desireable/ISL, so I hard set it to Dyn-desire to match... still very slow CNA.
The problem was not there before and after restarting the application, it appears to be fine... until I attempt to manage/view/reach the new switch - and then EVERYTHING in CNA goes slow again (hourglass of death) for some period of time.
Yet, telnet & ping to new switch is always fast, no problems at all. Strictly seems to be a CNA problem...
Ideas??
Thanks,
AlLooking at the outline given by u,there may be several reasons for this slow access such as loose connection, improper trunking and so on.Ofcourse, CNA problem can also be one cause.But, if u r sure that it is a CNA problem, why not u try for a new version of CNA?First of all, which version of CNA r u using?is it CNA 1.0 or 2.0 version.If so, try installing or upgrading CNA3.0.
For detailed info on installing and upgrading to CNA3.0, the following URL will be useful.
http://www.cisco.com/en/US/products/ps5931/prod_installation_guides_list.html -
my i phone 3g wont let me take call or recieve text messages it keeps saying searching or no service just started about a week ago my wife has a iphone also and hers is fine i tried reseting my network but that didnt help any thoughts i also replaced the sim card
I'm assuming you have this locked on a carrier...Did you take it to the carrier store and see what they say? You could try a restore but that most likely won't help...Sounds like maybe you have an upgrade in your future....
-
this is my first time asking a question so I don't know how to follow response.
Well, Macs are extremely finicky about their RAM (and different models need different spec RAM).
Can you check your model identifier please, so we can figure out if they sold you the exact spec RAM that your particular model needs? You can go here:
http://eshop.macsales.com/shop/apple/memory/iMac
and follow their directions on how to find your model identifier. Once you're figured that out, please post it here so we can check on the exact specs needed. Your RAM should say more than what you mentioned. On my iMac, this is what it says:
I don't know of any recent iMac that has DDR2, but I could be wrong there., Yours doesn't list the speed either (1333 MHz on mine). -
ios 6 has made my phone lose network and hence cant be set up... please help????
It is most likely permanently bricked. Jailbreaking can do permanent damage.
You can't get help here. Discussing jailbroken phones is forbidden by the terms of service.
Buy a new phone. -
My iphone power button is not working so today I decided to replace it, on opening few screws I was unable to continue as I was not able to open all the screws on the iphone. So far I had managed to disconnect display panel & battery only. So I decided to not to replace button myself and I closed it. After closing I am able to see iphone 5 connected to itunes and I can see all my data, however it continuesly beeping when connected to charger or computer. Also I do not see anything on display. Before opening the iphone everything was working fine now I can't see anything on screen.
I do not see any hardware demage or anything like that, can anyone suggest what could be the problem?
Please helpBasic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Everything that cames in the box is included in the 1year warranty, unfortunately you're just outside of that warranty. Regardless, if the above troubleshooting does not resolve, take the device to Apple and they can determine if the issue is the device, the charger(s) or something else.
Maybe you are looking for
-
Converting null and blank to NA in a column of a database table
Hi This is a simple thing but is giving me a hard time. I need to change the values coming as null or blank to NA . The values comes in a flat file as a source and I need to laod it convertign to NA in database. I wrote the expression as ISNULL([NPS
-
Problems trusting certificates from other users
I'm unable to trust certificates from users when the email address on their certificate does not precisely match the From address of the message. The mismatch is typically something like a From address of [email protected] and a certificate address o
-
Proxy to JDBC interface with multiple select queries
Hi all, We have to develop a interface where SAP will be sending a Number based on which we have to fetch the data from the database and send it to back to the SAP system. The data in database is spread across 6-7 tables/views and canu2019t be fetche
-
Database connectivity with MS Acess using WSAD5.1
I am using WSAD5.1 as IDE and development tool. I am trying to connect to MS Access database using following lines of code Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); //.newInstance(); dbConnection = DriverManager.getConnection("jdbc:odbc:DRIVER={
-
Buying music from other countries
Hi there, I've a problem with an album from India Arie I first found in the EEUU music store, but when I try to buy it, it says my account is only allowed to buy at the Spanish store (where I live), the problem is that this album is not available in