My iPhone 4s touch screen is not responding

Hi, my iPhone 4s touch screen is not responding. Please help! Thank you.

you can try to restart it
http://support.apple.com/kb/HT1430?viewlocale=en_US&locale=en_US
if it has no effect then one would suspect a hardware malfunction

Similar Messages

  • Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

    ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent.  Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen.  Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

    Hi Dire Dawa,
    If the screen on your iPhone isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • My iPhone 5c touch screen is not responding to my finger

    I've had my iPhone 5c for a couple months now. I have not dropped my phone but the touch screen has suddenly stopped working and doesn't read my finger swipes or touches. Sometimes it will start working again for a brief time but then stops working again.

    Hello there, Aim5353.
    The following Knowledge Base article offers up some great recommendations for troubleshooting touchscreen response on your iOS device:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Resolution
    If your device is experiencing any of the symptoms listed above, try the following steps:
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
    Additional Information
    Tip: To isolate an issue related to a portion of the Multi-Touch display, follow these steps:
    Open the Maps application and double-tap each corner, then the center, to verify that it zooms in to each section.
    If a specific area is affected in another application, note the location and try to verify touch functionality for that location in the Maps application.
    On iPhone and iPod touch, you can also use Calculator:
    Open the calculator app to test all but the top row of the screen. Press each button on the calculator and verify activity.
    To test the area at the top of the screen, rotate the device to change to the scientific calculator and press the buttons in the left or right two rows.
    When speaking with a Mac Genius or Service Provider, you can use this information to assist with evaluation of your issue.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • IPhone 5 touch screen does not respond when laid flat on a table. What do I do?

    I just started noticing this when a friend sent me a text and I was unable to "slide to unlock" the screen to reply. I tried swiping through the apps, up and down, left and right--every gesture that an iPhone was built to detect. Even the assistive touch didn't respond! What's interesting now is that whenever I pick up the phone and it's no longer lying 180º on a table, it responds normally. Should I be worried?

    I wouldn't be "worried" but it warrants a trip to the genius bar I would think.

  • Portion of my iphone touch screen is not responding

    Portion of the iphone touch screen is not responding while typing (both horizontal and vertical). All other functions are O.K.  Is it LCD problem or any calibration problem ?  Some experts says the LCD screen is to be replaced ?

    basic troubleshooting steps from the User Guide are restart, reset and restore.  Have any of these been tried?

  • My touch screen does not respond to my "slide to unlock". reset does not help. iPhone 4S works otherwise.

    my touch screen does not respond to my "slide to unlock". reset does not help. iPhone 4S works otherwise.

    I cannot use it. I can get calls and text messages but I can't respond because the screen is locked and I can't "slide to unlock" because the touch screen does not work.

  • My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    ME TOO.  NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
    iphone is diabled- connect to iTunes because i forget passcode.
    i cannot connect iTunes because it's always asking to enter passcode on iphone.
    So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
    My iphone is new. No icloud. didn't connect to itune backage.
    That's why I try to connect iTunes but it need to enter passcode.
    So, my iphone just keep "iphone is disbled-connect to iTunes".
    IPHONE 6 PLUS

  • My phone freezes and the touch screen does not respond to my touch.

    My i-phone 4 has been freezing up on me as of late.  The buttons will still work but the touch screen does not respond to my touch.
    Is my phone hooped or can I do sometinhg to fix it?

    First thing to try is a reboot of your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPhone restart. See if that fixes your problem.

  • My ipod nano touch screen is not responding please help, and i tried to hold down the volume and power button but its still not working

    ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box

    Have you double check to make sure VoiceOver and other accessibility features have not been turned on?  See this article for more information and assistance.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

  • My apple iPad touch screen is not responding

    My apple ipad touch screen is not responding it was working since few hours then that happened. There is no a single point on the responds to touch but everything is working on the welcome screen, detects  the Wi-Fi ... etc.
    First thing I did was passing on my local agent store. They did a soft reset what caused lose all data and apps (not a problem) but they didn't fix and asked to visit the support branch .. now i can't use the "Siri trick" and I think it's not helpful after resetting my device.
    I tried removing the screen protector but still no hope. Turned off it and cleaned the screen  but didn't help!!
    Is There another way? Any expected scenarios/time when I visit the repair branch in Egypt?
    I've upgraded to latest (7.12) 2 or 3 weeks ago

    Thanks ..
    I've mentioned that I did that now I'm in another stage, The iPad at the main reseller support department and they told me now that they will give me another in return .... the strange thing I have heard was that I have to wait 4 weeks until they get me one from Apple .. I'm i Egypt 

  • HT1222 my Ipad touch screen is not responding so i can not use the ipad for anything.

    i left my ipad in my car after ten minutes return to use ipad but could not log on because the touch screen is not responding. i try updating but to no avail
    pls somebody should tell me what to do before i lose my mind because its really frustrating

    Did you try rebooting?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • New ipad2: touch screen does not respond

    Hello, my name is Alessandro, I'm from Italy.
    I bought a new iPad 2 from Apple Store. After a day of use the touch screen does not respond and sometimes executes commands at random. I updated the OS, I restored as a new device, but nothing has changed.
    Someone can help me?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT1430 My  IPAD Mini touch screen is not responding, it is showing a message icloudBackup but the back up is not happening and the system seems to be hanged

    My  IPAD Mini touch screen is not responding, it is showing a message icloudBackup but the back up is not happening and the system seems to be hanged?

    Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
    Then test to see if it solved the problem.

  • HT1766 I purchased an Iphone 4 approximately 2 months ago and the touch screen is not responding and is not letting me type etc.  Has anyone else had this problem?  I have restarted the phone and it didn't help.  :-(

    I am having issues with my iphone 4 touch screen, I can't do anything with it.  I even have a hard time sliding the bar accross to accept calls.  Has anyone else experienced this?  I only have the phone 2 months.

    I've not experienced this.  But I do appreciate your asking.
    Did you want help with your technical issue?  If so, why don't you ask.  Also state what troubleshooting steps you've taken.

  • My I phone touch screen is not responding ????

    MMy touch screen on my I phone 5s is not working?????

    Try the solution on this website: http://en.kioskea.net/faq/3778-iphone-the-touchscreen-is-not-responding
    Or reading this website: http://www.ifixyouri.com/blog/what-to-do-when-your-iphone-screen-is-not-respondi ng/

Maybe you are looking for

  • Call a URL which is a Javascript

    Hi All. I know we CANNOT call javascript in Web dynpro abap. I also know we can call a URL via calling external window and passing the URL. We needed a functionality which requires a small piece of javascript code to be executed on click of any butto

  • Can anyone know this bug....

    Hi all, I'm new to the forum and the J2EE. Actually, i'm trying to get some values in a html form and call a jsp. The jsp page has to send the values to the bean and the bean should insert the values into a table. Actually everything is fine but the

  • Adobe CS 5.5 Camera Depth of Field Glitch

    I am getting a strange glitch in the After Effects CS 5.5 Camera. I've isolated it to depth of field effects. I have keyframed the aperture and focus distance at several points. It was working fine, then after 1 last keyframe, I started to get what l

  • Weblogic.ejb.utils.DDCreator

    does anyone know where does weblogic.ejb.utils.DDCreator locate. i installed weblogic6.0 on redhat7.1. i cann't find it in any jar under /lib. thanks a lot!

  • Forms issue 12.1.3 instance - FRM-92101: There was failure

    Hi, Forms are not getting open in my UAT instance, application version is 12.1.3. Error Message: FRM-92101: There was failure in the forms server during startup. This could happen due to invalid configuration. Please look into the web-server log file